Mills

MO Mats is a mill in Brashear, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

D & D Logging Inc is a mill in Racine, Missouri. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.

One Family Hardwood is a sawmill in St Joseph, Missouri, and it also buys standing timber and cut logs direct from landowners. It serves Buchanan County. They saw High Quality Kiln Dried American Hardwood Lumber, along with fresh sawn green lumber, wood chips, firewood, blocking, dunnage, decking, industrial timbers, wheel chocks, pipe saddles, and custom cut products. The species they buy include Ash, Aspen, Basswood (Lynn), Cottonwood, Cherry, Coffee, Elm (Red or Grey), Hackberry, Hickory (or Pecan), Locust, Maple (Soft or Hard Maple), Red Oak, Sycamore, Walnut, and White Oak. They buy logs year round, and they say "Standing Timber and Cut Logs are the most profitable to you (the landowner) when sold directly to a sawmill." Note that they will not purchase yard trees. Call to talk through your standing timber, forest, farm trees, or cut logs, and ask for Steve. One Family Hardwood is a large quantity commercial and industrial producer, but will also work with retail customers for smaller orders. The mill is located in northwest Missouri, about 50 miles north of Kansas City and just south of St Joseph, and ships product across North America. This one suits a landowner near St Joseph who wants to sell logs or standing timber straight to the mill that will saw them, cutting out a middleman. From 1fhw.net, read 3 October 2026.

American Walnut Co buys standing timber and logs out of St. Joseph, Missouri, and runs a sawmill there too. They buy within about a 200 mile radius of St. Joseph for standing timber, and up to 300 miles for log purchases. They cut "standing timber in a variety of sizes and species" and are insured. Their main interest is American black walnut, along with other selected hardwoods. For log sales, they want 40 logs or more, or 20 trees or more, if you're outside that smaller radius. If you have less than that, you'd need to bring logs to their yard on South 2nd Street yourself. If you're interested in a sale, you call them to arrange a bid, and timber and logs get measured out by board foot using Doyle's scale. If you have fewer logs or trees than their 40-log or 20-tree mark, this probably isn't the place to start, since that's the line they draw for buying in the field rather than at their yard. They say they practice "sustainable harvesting of hardwood trees" and describe their approach as "conservative timberland management resulting in a self-perpetuating supply of American black walnut and other selected hardwoods." The company has been producing and distributing its products since 1924. This fits a landowner in Buchanan County, Missouri, or within easy reach of St. Joseph, who has a real stand of walnut or other hardwood timber, enough volume to make it worth a buyer coming out, and wants a straightforward call-and-bid process rather than a drawn-out consultation. From americanwalnut.com, read 8 October 2026.

The Ozarks Sawyer is a mill in Purdy, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Sni Creek Sawmill is a mill in Oak Grove, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

East Perry Lumber Co. is a sawmill in Frohna, Missouri. They buy standing timber and logs, run their own logging crews, and mill the hardwood themselves. They've been at it since 1945, when Marvin F. Petzoldt founded the company as a small portable mill making railroad ties and barn lumber. If you've got hardwood timber to sell, they want 10 or more acres before they'll come look. They work in hardwood only. Their foresters are degreed, and their logging crews trained through the Missouri Forest Products Association Professional Timber Harvester Program, with a combined 70 years of experience between them. They say every landowner has different goals, whether that's wildlife management, long or short term financial planning, or converting land use, and they'll meet with you to talk through how a harvest fits those goals. They pull raw material from a 100 mile radius, and they're also buying already-harvested hardwood logs out of Southeast Missouri, Southern Illinois, Western Kentucky, and Western Tennessee. On the milling side they do kiln drying, finish surfacing to any thickness, straight line ripping, mixed truckloads, heavy duty shrink wrapping, export prep, and container loading, so they're set up for buyers beyond just the local market. This fits a landowner with a real tract of hardwood, at least 10 acres, who wants a mill that also buys standing timber and runs its own harvest, rather than a broker who hires it out. From eastperrylumber.com, read 8 October 2026.

Southside Lumber Co is a sawmill and log buyer in Butler, Missouri, cutting custom lumber since 1945. They buy logs straight from landowners, loggers, and forestry professionals in Bates County and around Butler, and they run the mill themselves. They work in Missouri hardwoods: hickory, pecan, ash, walnut, red oak, and white oak. Logs they buy need to run 13 to 48 inches across the small end, and 8 feet 6 inches to 16 feet 6 inches long. Past buying logs, the mill also produces full dimension lumber, kiln dried and rough cut stock, decking, horse stall lumber, slabs, table tops, and more, and they'll cut logs you bring in yourself under their "Bring Your Own Logs" service. They offer lumber consulting too, if you are not sure what species or cut fits your project. They are members of the National Federation of Independent Businesses and the Missouri Forest Products Association. On their own log-buying page they describe the process plainly: "No load is too small or too large," and they say they aim to make it "quick, fair, and easy." This suits a landowner in Bates County or near Butler who has logs ready to sell or lumber to get custom cut, and who wants a local mill that also buys direct rather than a bigger operation set up for large timber sales only. From southsidelumberbutlermo.com, read 8 October 2026.

Reed & Wolfe Lumber Co is a mill in Mountain Grove, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Roark Sawmill is a mill in Marble Hill, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

M-T Timber is a mill in Cross Timbers, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Kean Ranch Custom Sawmilling is a mill in Diamond, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Don Reeves Sawmill Pallet and Lumber Co is a mill in Bourbon, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Whittaker Cedar Sawmill is a mill in Bradleyville, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Burke Sawmill is a mill in Climax Springs, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Heartland Heartwoods Sawmill Lumber & Woodworks is a mill in Napoleon, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Boone Valley Saw Mill operates as Boone Valley Forest Products, Inc., based in Hermann, Missouri. This is a lumber company, not a service that buys standing timber or arranges timber sales off your land. They run a sawmill, a custom crate division, and distribution yards, working in hardwood, oak, pine, spruce/pine/fir, Douglas fir, ponderosa pine, southern yellow pine, and plywood. Their work covers cutting lumber to exact lengths, surfacing, resaw and reman, plywood cut-to-size, heat treating for export, custom penta treating, and fire retardant treating. They also do warehouse and transload services and can ship combination loads of oak, pine, and S/P/F. Delivery is nationwide, and they describe themselves as "a different kind of lumber company," aiming to be "a valuable business partner" to the companies they supply. The company was founded in 1998 by Chris Carnahan, and it lists Gasconade County as a county it serves. There's no mention here of buying standing timber, logging jobs, or helping a landowner run a timber sale. This looks built for companies ordering lumber products, not for someone with acreage trying to sell trees off the stump. From boonevalley.net, read 8 October 2026.

Stutzman Sawmill is a mill in Conway, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

S&S SAWMILL LLC OLDFIELD MO. is a mill in Oldfield, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

STEPHENS SAWMILL & EXCAVATING CO. is a mill in Drexel, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

KAHL Sawmill & Woodworking LLC is a mill in Dixon, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

L&K Hardwoods is a sawmill in Independence, Missouri, run by Larry and Cammie. They work in hardwood and walnut, offering custom milling, kiln drying, and custom furniture. They are located in Eastern Jackson County, at the historic Blue Mills Grist Mill Site, and serve Jackson County. If you bring them a log, they cut it on a Timberking 6000 band saw mill that handles logs "up 60 inches & 18 feet long." All logs have to be 8 feet long or longer for them to mill, and they ask that the log owner be present for the work. Milling is booked in 3 hour increments, but you are only charged for the hours actually used. For drying, they run an IDry Vacuum Kiln, with the process taking about two weeks on average, longer depending on species and moisture. Lumber needs to be stickered and ready before it goes in, or there's an added fee for them to do it. Appointments are booked ahead of time rather than walk-in. This is not a timber buying or logging outfit. It is a mill and shop, the kind of place you'd use once you already have logs down and want them cut, dried, or turned into something, including custom furniture work. Good fit for a landowner who has wood on the ground or standing timber already cut, and wants it milled and dried close to home in the Independence area, rather than someone still looking for a buyer to harvest standing timber. From landkhardwoods.com, read 8 October 2026.

K & K Wood Products is a mill in Centralia, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Yoder Hardwoods is a mill in Verona, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Huffbilly Milling & Woodcraft is a mill in Eagle Rock, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Cutting Edge Sawmill is a family owned business in Washburn, Missouri, "built by sawyers who needed dependable blade service." They started out sharpening their own blades because they couldn't find anyone nearby to do it right, and that grew into a sawmill blade sharpening shop that also runs a portable mill. If you've had trees taken down and want them turned into lumber, their mobile sawmill, a Wood-Mizer portable bandsaw mill, can come to your property. It handles logs up to 16 feet long and 22 inches across, and can square up logs as large as 30 inches. They'll flat stack the slabs as they come off the mill, or sticker-stack them for proper air drying if you want that instead, and you're left with scrap wood, sawdust, and your milled lumber. On the blade side, they inspect, sharpen, and set band sawmill blades from brands like Wood-Mizer, TimberKing, and Baker, with most blades shipped back out within one to two weeks. The family has owned and operated their own sawmill for over 20 years. Local drop-off and portable milling cover Southwest Missouri, including Barry County where they're based, and blade sharpening by mail reaches customers nationwide. This fits a landowner in Barry County who already has logs down and wants them milled into usable boards on site, or any sawyer nearby who needs blades sharpened and set rather than needing someone to buy standing timber. From cuttingedgesawmill.com, read 8 October 2026.

Ozark Wood Products Co is a mill in Goodman, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Stateline Sawmill & Logging is a mill. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Chapman Wood Products is a sawmill in Neosho, Missouri, run by Steve Chapman. Steve started cutting timber at 17 and bought this sawmill 25 years ago after he saw no one else around was doing custom sawing anymore. What began as one building for the mill has grown to seven buildings for drying and storing lumber and building things for customers. This isn't a buyer looking to purchase standing timber off your land. It's a custom sawmill that takes logs and turns them into finished pieces: specialty tables, slab tables, natural edge countertops and bar tops, rustic tongue and groove flooring, 3 to 6 inch flooring, fireplace mantels, doors, and benches. Steve works without formal plans, letting the wood's own grain and shape guide the piece. The business lists Newton County among the areas it serves, with work also described more broadly across Missouri. They call themselves "one of Missouri's last custom sawmills," meaning they'll take on smaller or odder jobs that bigger operations turn away, and they say they "pride ourselves on fast turn around and personal service." Finished pieces are also on display next door at the Old Cedar Mill Gallery. This fits a landowner who already has logs or wants something specific built from their own wood, not someone looking to sell standing timber outright. From chapmanwoodproducts.com, read 8 October 2026.

Rackensack Kilns and Sawmill is a mill. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Double D Sawmill is a mill in Lamar, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Timber Ridge Millworks is a mill in Versailles, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Beaver Oak Hardwoods is a mill in Ste. Genevieve, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Stafford Logging & Sawmill is a mill in Ozark County, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Hudson Sawmill Services LLC is a sawmill business that mills logs and fallen trees into usable lumber, serving the people of Northwest Arkansas. It is "licensed, insured" and describes itself as a "family owned and operated business," with every part of the operation, from the website to the milling, staying in the family. The mill is a Timberking 2020, a portable sawmill with full hydraulics, powered by a 37HP engine that can cut logs up to 34 inches wide and 20 feet long. Work includes cutting posts, stock lumber, and other custom cuts from your trees. If you bring your logs to them, the rate is $100 per hour. If you need the portable sawmill brought to your land, that service starts at $200 per hour. This is a milling operation, not a timber buyer or forestry advisor, so it suits a landowner who already has logs down or standing timber cut and wants them turned into usable lumber, whether that is posts, boards, or something more particular like a charcuterie board or house timbers. Call (479)-633-5468 to talk through what you have and what you want made from it. From hudsonsawmill.com, read 3 October 2026.

Madison County Wood Products Inc. is a sawmill and pallet manufacturer in Fredericktown, Missouri. The company handles land and timber management, logging, sawmilling, and pallet manufacturing, so a landowner can work with one outfit from standing timber to finished product. It was incorporated in 1981 by founding partners James C. Kesting and Douglas J. Gaines, and it is still family run. The mill takes red oak, white oak, hickory, walnut, and cherry, turning logs into grade lumber, railroad ties, cants and squares, pallets, and mulch, chips, and dust. The company describes itself as a "fully integrated company" that takes "a zero-waste approach while converting the complete log into usable products," meaning they buy standing timber, log it, and mill it themselves rather than passing the job along. It holds ISPM-15 certification for its pallet operation. It serves Madison County for timber work, with a wider reach into Kansas, Nebraska, Iowa, Illinois, and Northern Missouri for its pallet and wood products through its Clifton Hill facility. There is no stated minimum acreage for timber jobs. This fits a landowner in or near Madison County who wants a mill that also buys and logs the timber itself, especially if the woods carry oak, hickory, walnut, or cherry worth grading into lumber rather than just selling as pulp. From mcwp.com, read 8 October 2026.

Rustic Wood Products Inc is a sawmill in Perryville, Missouri. It makes hardwood lumber, and it's a family-owned business that says it has a "reputation for quality production." It works with buyers ranging from local hobby stores to major worldwide lumber distributors, so it handles both small and large orders. The company serves Perry County. It describes itself with a guarantee: "Rustic Wood Products guarantees exceptional hardwood lumber." Beyond that, no species other than hardwood lumber are named, and no minimum tract size or acreage is given on its pages. This one suits a landowner who already has lumber or logs ready to sell and wants a hardwood mill nearby in Perry County, rather than someone looking for standing timber buying, logging, or forestry advice on their land. From rwpinc.net, read 8 October 2026.

Missouri-Pacific Lumber Co is a sawmill and timber buyer in Fayette, Missouri, in Boone County, working with landowners in Howard County. They've been milling walnut and other hardwoods for over 45 years, and they're NHLA Grade Certified for grading accuracy. If you have timber to sell, someone from the company will meet you on the ground, walk your woods, and "mark it based on your desired objectives," then give you a written breakdown of species, volume, and grade before anything is cut. They buy American Black Walnut, White Oak, Silver Leaf Soft Maple, Aromatic Red Cedar, Ash, Northern/Appalachian Red Oak, Hickory, and Cedar, though walnut is their main focus. Their timber is sourced mostly from northern Missouri. Every sale comes with a purchase contract spelling out who's responsible for what, which the company calls "an extra level of protection for the landowner to ensure that the job gets done to their satisfaction." Logging is done by insured contract crews, and they offer a few payment options, including full payment before any cutting starts. Services on offer include timber buying, timber appraisal, steaming, and sawing. This outfit suits a landowner with walnut or other hardwoods in northern Missouri who wants a sawmill with a long family history and a contract in hand before the saws start, rather than a quick cash offer from a stranger's truck. From mopaclumber.com, read 8 October 2026.

Martin's Saw Mill is a mill in Barnett, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Doolittle Wood Products LLC is a mill in Rolla, Missouri. It has a Google Maps business listing in that category. It is also listed as a timber buyer and a logging contractor. A listing here is not an endorsement.

Simmerly Timber Co Inc is a mill in Bourbon, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Sunderland Sawmill is a mill in Fayette, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Callaway Lumber is a mill in Tebbetts, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Roy L. Masters Mill is a mill in Caledonia, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Southard's Mobile Sawmill is a mill in Jackson, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Davis sawmill is a mill in Doniphan, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Triple H Sawmill & Farm LLC is a mill in Doniphan, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

High Brothers Lumber is a lumber store and sawmill operation in Camdenton, Missouri, serving Camden County. This isn't a timber buyer or logging outfit. It's a retail lumberyard: the place you'd go to buy dimensional lumber, treated lumber, cedar, hardwoods, softwoods, western spruce pine fir, engineered wood, and specialty woods, along with siding, doors, flooring, windows, cabinets, and hardware. Alongside the lumber, they offer custom cutting services and professional installation, plus tool and equipment rentals. Their own words describe the business as being "your go-to source for premium quality lumber and building materials." The company started in 1978 as the Plywood Barn, founded by Jim High and his brother Pete High, and has run under the High Brothers name since 1991, now operated by the next generation of the family. There's no minimum tract size or acreage stated anywhere in what they publish, since this isn't a business that buys standing timber off land. No stated acreage threshold applies here because the work isn't tied to acreage at all. This fits a landowner who needs lumber, building supplies, or cutting and installation work done, not someone looking to sell standing timber or have a tract logged. From highbrotherslumber.com, read 8 October 2026.

Latham Lumber Co is a mill in Jackson, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Hilltop Lumber LLC is a mill in Carrollton, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Oak Ridge Pallet & Lumber is a mill in Van Buren, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Walker Machinery Company, LLC. is in Ellsinore, Missouri. This isn't a business that buys standing timber or logs your land. It sells and services sawmill and logging equipment, and handles "Repairs & Sharpening" for the machines loggers and millers use. They also carry sawmill equipment, new and used, plus American-made grills and fryers. Their own words sum up the approach plainly: "Our mission is to provide you with quality service and parts to fulfill your needs." They've been at it a while too, thanking customers for "the last 22 years" of business. No species are named, no timber sale process is described, and there's no stated minimum acreage, since this isn't a timber-buying operation at all. They run "2 Route Truck That Cover Most Of Missouri" for service calls, and the register lists Carter County as where they're found. This fits a landowner who already owns or is running a sawmill, or who needs blades sharpened or logging equipment repaired. It is not a fit for someone looking to sell standing timber or get a stumpage offer. From walkermachineryco.com, read 8 October 2026.

Blue Ridge Lumber is a mill in Van Buren, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Tim & Dan's Wood Stuff is a mill in Ellsinore, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

McClain Forest Products is listed under mills and timber buyers in Ellington, Missouri, and serves Carter County. The company runs five concentration yards: "Four yards located in southern Missouri and one in northwest Arkansas." They buy green lumber and mill hardwood species including Red Oak, White Oak, Hickory, Walnut, H. Maple, S. Maple, Ash and Cherry. Across all locations they report total monthly production of 4.0 MM bf and total kiln capacity of 1.5 MM bf. The company traces back to 2010, when it "acquired the hardwood lumber operations of the North Pacific Group" and took on the McClain Forest Products name after merging operations. Its roots go further back into McClain Farms and related Missouri and Arkansas businesses built up over decades. Sales for the hardwood lumber side run through a related company, Legacy Wood Products, staffed by sales representatives and sales managers who handle worldwide buyers for the mills' output. This is a mill and buying operation built around moving hardwood volume through yards in southern Missouri and northwest Arkansas, not a tract-by-tract timber sale service. A landowner near Carter County with hardwood species like oak, walnut, or cherry to move, and who wants to deal with a green lumber buyer directly tied to milling capacity, is the kind of person who would look here. From mcclainforestproducts.com, read 3 October 2026.

C&K lumber is a mill in Birch Tree, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Kirby Saw Mill Inc is a mill in Doniphan, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Joys Rustic Mill & Lumber is a mill in Clubb, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Mengwasser's Mill is a mill in Freeburg, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Stucker Brothers Inc is a mill in Ellsinore, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

OSL at The Sawmill is a sawmill and hardwood lumber business in Highlandville, Missouri, also known as Ozark Saw & Lumber. It mills timbers, posts, beams, pergola and pavilion kits, live edge slabs, hardwood lumber, stair treads, and tongue and groove siding, with custom sizes and configurations on request. The wood on hand runs to old-growth yellow pine, hardwood lumber, and walnut. The business says it's "milled right here in the Ozarks," and that customers can handpick their own material, whether that's one beam or a full parts list for an outdoor structure. Every order "starts with a phone call" where they walk you through sizes, options, and delivery before anything is committed to. It was started in 2020 by a father and his two sons, and it serves Christian County. This suits a landowner who already has logs or timber down and wants it milled into lumber, beams, siding, or a finished kit, rather than someone looking for a buyer to come cut standing trees off their land. From ozarksawandlumber.com, read 8 October 2026.

Willie Hibner Sawmill is a mill in Chillicothe, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Cardwell Lumber Co is a sawmill business based in Novelty, Missouri, running two mills in the northeast part of the state. It's a family owned outfit with decades in the lumber business, "producing millions of board feet annually" across its two sites. The work includes kiln dried lumber, green lumber, custom cuts, and hardwood flooring that's special cut from their kiln dried stock to match what a customer needs. They run a modern air drying facility with "over 210,000 board feet of dry kiln capacity," and they ship lumber both domestic and abroad. Cardwell Lumber Co is found in Chariton County and serves Knox County. This is a mill set up for cutting and drying lumber to order, not an outfit that walks your woods to price standing timber or arrange a harvest. It fits a landowner who already has logs or a lumber order in mind and wants them custom cut, dried, or made into flooring. From cardwelllumberinc.com, read 8 October 2026.

Merritt's Sawmill Steelville is a mill in Steelville, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Midwest Timber & Beam Supply is a sawmill and lumber supply business in Highlandville, Missouri, in Christian County. It is listed as a lumber store, cutting and selling wood products rather than buying standing timber. It offers timber beams, both fresh-cut and kiln-dried softwood beams, custom-cut materials, interior wood siding, and special orders or custom millwork. Species on hand include Douglas Fir, Eastern White Pine, Austrian Spruce, European Spruce, and Sugi Cedar, along with European Car Siding and Nickel Gap siding styles. It describes its work as giving "job-site ready wood products" to builders, contractors, and DIYers. You can call or message to request a quote, a custom cut, or special millwork for a project. It serves Christian County and ships more widely across Missouri and Tennessee. It says, "Since 2015, we've been dedicated to providing high-quality, unfinished timber" for building and renovation needs. This fits builders, contractors, and homeowners who need finished beams, siding, or custom millwork brought to a job site, rather than a landowner looking for someone to buy or log standing timber. From midwesttimbersupply.com, read 8 October 2026.

Ponderosa Mill is a mill in Highlandville, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Clear Cut Saw Mill is a mill in Reeds Spring, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Clancy's Custom Hardwood and Tree Service is a family run sawmill and tree service in Seymour, Missouri. Shane Clancy and his children run it, cutting trees, milling and drying the logs, and turning them into lumber or finished pieces. They do custom milling and drying with their own two kilns, cutting lumber for flooring, burls, building lumber, or custom slabs. They also build handmade furniture and custom kitchen tables from the wood. On the tree side, they handle tree trims and full tree removal, with a bucket truck and "skilled climbers" for hard to reach trees. Walnut is the wood named on their gallery page. They serve Webster County, and describe themselves as "A family ran sawmill and tree service working hard to offer the best customer service available." There is no stated minimum acreage. The only job size mentioned is a walnut log brought to the mill for cutting, so this looks like a business set up to take on individual logs and smaller milling jobs rather than standing timber sales. Shane Clancy has 25 years in tree work, and the family has been milling in the Marshfield area for about 10 years. This one suits a landowner with a tree or two down, or a load of logs already cut, who wants it milled, dried, and made into something, more than someone looking to sell standing timber off a larger tract. From clancytreeservice.wixsite.com, read 8 October 2026.

D W Goldie Wood Products is a mill in Canton, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Robert Sommers Sawmill is a mill in Luray, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Yoder Saws Inc, in Kahoka, Missouri, sharpens and repairs saws for sawmills. This isn't a timber buyer or a logging outfit. It's the shop a mill owner calls when the blades need work. The business works on band saws and circle saws: cleaning, benching, swaging, sharpening, carbide tipping, and repair of cracks and butt welds. They also do mill alignment and troubleshooting, chipper knife sharpening, and band saw wheel grinding. They sell sawmill supplies too, things like guide blocks, teeth, holders, and shanks, and they can ship or freight orders to you. Levi Yoder, the President, started the business over 15 years ago and has more than 25 years of experience with wide band saw blade maintenance and repair and carbide circle saw work. He says the goal is to "maximize production with a professional band saw and circle saw service." They work in Clark County. Because this is saw service rather than timber buying, it won't help a landowner looking for someone to cruise, mark, or buy standing timber. It's the right call if you, or whoever is logging your land, already has a mill or saw that needs sharpening, repair, or alignment, or if you need sawmill parts and supplies on a schedule. For anyone further along with trees already down and headed to a mill, this is the kind of shop that keeps that mill's saws cutting straight. From yodersaws.com, read 8 October 2026.

Wyco Wood Co. is a mobile sawmill business working out of Kansas City. Instead of you hauling logs somewhere, they bring one of their two sawmills right to your land and mill the wood to your specs. They also do kiln drying, lumber sales, large log removal, and make dunnage, blocking, and wedges for shipping. They work mostly with aromatic red cedar, oak, walnut, and cherry. The process is straightforward: they haul their equipment out, cut the logs you want cut, and hand back workable lumber ready for a project rather than a pile of green boards. They call themselves family-owned and veteran-owned, and offer a free consultation before any work starts. Their reach covers the Kansas City Metro Area, including Lawrence, Olathe, Liberty, Smithville, and Platte City. This fits a landowner who has specific trees down or standing, wants them turned into usable lumber on-site rather than sold off as logs, and would rather deal with a small, hands-on crew than a big logging outfit. From wycowoodco.com, read 8 October 2026.

Lunas Lumber Co is a mill in Dora, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Southwest Mill Supply Co is a mill in Kansas City, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Richards Wood Products is a mill in Steelville, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Gargus Sawmill is a mill in St James, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Dry Creek Lumber Co. is a family-owned mill in Bourbon, Missouri. They work mostly with Bur Oak and Yellow Poplar, turning logs into custom live edge slabs, mantels, and craft wood. Their own words call them a "family-owned boutique lumber mill that specializes in custom live edge slabs, mantels and craft wood." The work they take on includes custom planing, straight-line cuts, slab flattening, custom milling, drum sanding, and kiln drying. A good chunk of their log buying comes from urban salvage, which fits their stated "commitment quality products and sustainable forestry." They serve Crawford County. There's no minimum tract size stated, so it's hard to say how small a job they'd take. If you've got a few Bur Oak or Yellow Poplar logs and you're after a finished slab or mantel rather than a straight timber sale, this is the kind of outfit that handles that end of things, the milling and the custom work, not necessarily standing timber purchases off raw acreage. This one suits a landowner who already has logs down, or wants custom milling, planing, or kiln drying done, more than someone just starting out trying to sell standing timber off untouched acres. From drycreeklumber.com, read 8 October 2026.

Jadwin Sawmill is a mill in Salem, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Dunlap Sawmill is a mill in Boss, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Martin Logging & Sawmill is a mill in Cherryville, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Tracy Sawmill, LLC is a mill in Silex, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

OP Valley Saw Mill is a sawmill in Springfield, Missouri, run as part of OP Hardwoods LLC. It serves Greene County, and it's also found in the business listings for Dallas County. The mill takes a tree from "Tree to Table." Services include slab cutting (custom or standard thickness), lumber in standard or custom widths, kiln drying (done at an offsite location, priced by the board foot), and logging for land clearing work like building sites or grazing. If you need a tree taken down or turned into lumber or a finished piece, they offer to see the job through from standing timber to a built project. Work is by appointment only, and they list a $75 set-up fee with an hourly rate of $120 (or $2.00 a minute). Their own words sum up the aim: "Helping you build today's dreams into tomorrow's heirlooms." This fits a landowner in or near Greene County who has a tree or a small stand with a story behind it, wants it logged or cleared, and likes the idea of seeing it turned into lumber or furniture rather than just sold off. From opvalleysawmill.com, read 8 October 2026.

Pacific Sawmill Service is a sawmill in Pacific, Missouri. It's locally owned, and it was started by Roy Esslinger to build a long-term business for future generations. The work is custom lumber cutting: you bring logs, they cut them into lumber using a portable wood-mizer sawmill that can handle "any type of trees in a variety of lengths, widths, and thicknesses" to your specs. They cut rafters, floor joists, studs, purlins, ridge beams, headers, blocks, knee braces, king posts, facia boards, soft trim, support girders, sills, and beams, and they also make custom furniture. This isn't a timber buyer or a logging outfit. There's no mention of buying standing timber or running a landowner timber sale. It's a cutting service for wood you already have, or want milled to order. They serve Pacific, Washington, Eureka, Union, Villa Ridge, St. Clair, Sullivan, St. Louis, St. Charles, Wentzville, Troy, Arnold, and Fenton, and Franklin County is named as a service county. No minimum job size is given, and no species are named. This fits a landowner who already has logs down, or standing timber they've had cut themselves, and wants it milled into usable lumber or custom pieces, rather than someone looking to sell standing timber outright. From pacificsawmill.com, read 8 October 2026.

Akers Lumber is a mill in Licking, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

G B Martin Sawmill is a mill in Bunker, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Elliotts Sawmill LLC is a mill in Macomb, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Schaller Hardwood Lumber Co is a mill in Poplar Bluff, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Miller Farm and Sawmill is a mill in Neelyville, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

JG Sawmill is a mill in Owensville, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Gingerich and Son's Saw Mill is a mill in Bethany, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Samples Hickory Mill is a mill in Doniphan, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Sterling Lumber Co is a mill in Louisiana, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Giles & Kendall Sawmill is a mill in Gainesville, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Woodland Hardwoods is a mill in Boone County, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Ron Harper's Sawmill is a mill in Summersville, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

4R Saw Service, LLC is a mill in West Plains, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Garnett Wood Products Co, now doing business as Royal Oak-Brandsville, is a mill in Brandsville, Missouri, in Howell County. It is listed as a mill and also does woodworking and retail work. This is not a company that comes out and buys standing timber off your land. It is a full service wood products company that takes in wood and turns it into pallets, skids, pallet components, boxes, crates, and other specialty wood products. It also brokers pallets and wood fiber, makes wood fiber and charcoal, and offers its own trucking for transport. The company has been in Brandsville since 1965, first as Garnett Wood Products and now under the Royal Oak name. It calls itself a "full service wood products company" and says it runs an "up-to-date facility" to keep its product lines consistent. It says it belongs to several trade affiliations tied to sustainable and responsible practices. It serves Howell County. No species are named and no acreage minimum is given. This fits a landowner who has already got logs or wood on hand and wants a mill to turn them into pallets, boxes, crates, or wood fiber, or who needs trucking for wood products, rather than someone still looking for a logger to come harvest standing timber. From royaloakspecialtywood.com, read 8 October 2026.

Midwest Walnut Co is a mill in Willow Springs, Missouri. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.

Harbison Lumber is a mill in Mineral Point, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Twin Oak Sawmill is a mill in Jackson County, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Wood Warriors is a mill in St. Louis County, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Naeger Forest Products Inc is a mill in Ste. Genevieve, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

TNT sawmill and milling services is a mill in Higginsville, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

NEMO Hardwoods is a mill in Edina, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

L & L Contractors is a mill in Hartville, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Missouri Walnut is a mill in Neosho, Missouri. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.

Camp Creek Hardwoods is a custom sawmill in Hawk Point, Missouri, run by owner Brad McCarty. The business describes itself with "Custom Sawmill Service Hardwood Lumber," taking logs and turning them into lumber for landowners and woodworkers. The mill works with black walnut, hard maple, red oak, hickory, red cedar and sycamore. Beyond sawing, it offers slab flattening and thickness planing, so a log can come back as finished, usable boards rather than rough-cut stock. It also cuts smaller specialty pieces, listed as "Gun stock blanks, pistol grip blanks, knife scales, turning blanks, game call blanks & craft lumber," for anyone wanting material for gunsmithing, knife making or craft work instead of standard boards. This is a sawmill, not a timber buyer, so it suits a landowner who already has logs down and wants them custom sawn into lumber or specialty blanks, rather than someone trying to sell standing timber. From campcreekhardwoods.com, read 8 October 2026.

Three Bills Woodshop is a mill in Phelps County, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

J & M Walnut Lumber LLC is a mill in Bucyrus, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Theodosia Portable Sawmill Services and Remodeling is a mill in Ozark County, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Davis Sawmill Inc is a mill in Doniphan, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Brewster Sawmill is a mill in St Mary, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Richardson Walnut LLC is a mill in Success, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

St Charles Lumber & Moulding is a mill in Bowling Green, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Royce Smith Walnut Co is a mill in Success, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

George Mc Nail Sawmill is a mill in Redford, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Burr's Sawmill LLC is a mill in Granger, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Lumber Specialists Inc. is a lumber wholesaler based in Ellisville, Missouri, in St. Louis County. It has been in business since 1989. This is not a sawmill buying standing timber off your land. It sources full-truckload commodity and specialty lumber, boards, dimension lumber and timbers, panels, OSB, plywood and sheathing, and exotic hardwoods, both domestic and imported, and supplies it to manufacturers, remanufacturers, millwork fabricators, and industrial buyers across North America. The work it takes on includes "specialty species", "unusual dimensions", "custom specs", and full-truckload volume. It also handles the shipping and logistics around those orders, including LTL, truckload, and carload freight. Its own words describe the draw this way: "we've built something most distributors don't bother with: real relationships with sawmills, treaters, remanufacturers, and importers across the U.S. and internationally." That network is what lets it source material other distributors turn away. Its customers aren't picking up lumber at a yard. They're running production lines, fabricating finished products, and managing supply chains, ordering at scale on a schedule rather than buying a one-off load. This fits a manufacturer or industrial buyer who needs a dependable truckload of specialty lumber, not a landowner looking for someone to come cut and buy the timber standing on their acres. From lumberspecialists.com, read 8 October 2026.

Ste Genevieve Manufacturing Co is a mill in Ste. Genevieve, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Houston Wood Treating is a mill in Houston, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Jim's Deal is a mill in Deerfield, Missouri. It has a Google Maps business listing in that category. A listing here is not an endorsement.