Mills

Buda Woodworks designs, fabricates and installs custom architectural millwork, woodwork and casework for commercial and residential projects from premises at 2041 FM2001, Buda, Texas. Its about page says the business was established in 1993 and has grown to become Central Texas' largest source of Architectural Woodwork Institute (AWI) Premium Grade architectural woodwork, working turnkey from design through build to installation. It sells to general contractors, architects, designers and construction teams, and says its work can be seen in buildings and spaces throughout the United States. The service pages cover custom millwork, desks and ornamental fixtures, wall and ceiling paneling, commercial casework, trim and moulding, custom stairs and railings, custom seating, custom fabrics, custom metal fabrication, and stone and solid surface countertops, with materials running to wood, metal, laminate, glass, fabrics, stone and plastics. Listed specialities include blueprint-matched wood veneer paneling, architectural steel including framing structures, reception desks, arches, ellipses, curved walls and columns, bar fronts, tops and railings, cashier stands, and Marlite custom paneling supply in Central Texas. The sectors it names are corporate tenant improvements, office, premium hospitality, luxury residential, medical, education and athletic facilities. Casework is made to Architectural Woodwork Institute standards, the craftsmen and designers are described as AWI-certified, and each project is coordinated by an AWI-tested project manager who acts as the point of contact between the general contractor and the shop; the firm also offers to value engineer projects with architects and designers. Enquiries are handled by a consultation booked through the contact form or by telephone, and the office is open Monday to Friday, 8.00 to 6.00. The site's footer identifies the business as an Arcline Build Group company. As described on budawoodworks.com, read 23 September 2026.

Sweeney Lumber's home page opens by saying the firm has been “proudly providing building products and services to North Texas since 1960,” and its About page repeats the date: the company “was founded in 1960 by Hal Hughes and Robert Sweeney, with a commitment to provide quality products and services to the construction industry.” The site is published by the R.E. Sweeney Company at 3700 Noble Avenue in Fort Worth, and every page carries a 2010 copyright line, so some of the wording may be older than current operations. It describes a distribution and manufacturing business rather than a timber-buying one: “Complimented by our other divisions, Resdoor and Sweeney Hardwoods, we provide our customers with a complete line of building products and services including softwood lumber, panel products, prefabricated trusses, doors, mouldings, hardwoods and windows.” The home page lists membership of the Lumbermen's Association of Texas and Louisiana, the National Association of Homebuilders and the Structural Building Components Association; it names no third-party certification or grading scheme. The contact page gives a toll-free line, a local number, a metro number and a fax, offers a downloadable credit application for “those who qualify,” and invites buyers to tick interests including lumber, engineered wood, plywood, OSB, trusses, and siding and trim. Nothing on the pages read addresses buying standing timber, any minimum tract size, staff or forester credentials, or how a job is quoted. As described on sweeneylumber.com, read 23 September 2026.

Tanner Services, LLC is an oilfield services contractor whose work spans construction, timber, solids control, poly pipe and pit lining, production and maintenance, and hydro excavation, summarized on its site as "Providing Construction Services to the Oil & Gas Industry." The company says it and its management team have been providing general oilfield construction services to the Gulf Coast for over 40 years on the home page, while the about page and site footer state over 35 years. Its corporate office is at 302 Unatex Road, Eunice, LA, and it lists locations in Eunice and Schriever, Louisiana and Kountze, Dayton, El Campo and Midland, Texas. On the timber side, the company states that "In order to ensure quality mat construction, Tanner Services owns and operates its own in-house lumber mills and mat building facilities," processing lumber for board roads, pipeline skids and crane mats; it presents board roads and mats as "an efficient and environmentally friendly solution to unfavorable terrain by creating temporary yet solid platforms and roads for both work and transportation," and calls itself "your safest path through troublesome weather and terrain." Listed timber products and services are 2-ply and 3-ply laminated mats, board road lumber, dragline mats, crane mats, pipeline skids, hardwood chips, full support to all Tanner Services locations, special orders and delivery. Safety is presented as a priority, with job safety analysis, weekly and monthly safety meetings including top management participation, and in-house safety directors described as knowledgeable in OSHA training and experienced in the medical field; training guidelines listed include confined space entry, cranes, DOT HM-126F hazmat, fall protection, first aid/CPR, lockout/tagout, process safety management, respiratory protection and rigging/material handling. As described on tannerservices.net, read 23 September 2026.

This listing is for a Georgia-Pacific operation in Diboll, Texas, but the only pages that answered for it were the company's national corporate site. Those pages describe Georgia-Pacific as a Koch, Inc. company founded in 1927 in Augusta, Georgia, as Georgia Hardwood Lumber Company, and say it now has more than 150 locations worldwide, locations in nearly 30 states, over 30,000 direct employees and $2.7 billion in direct wages and benefits. The company says it makes consumer tissue, towel and tableware products under names such as Quilted Northern, Brawny and Dixie, supplies dispensers and hygiene products to businesses, produces pulp and corrugated boxes, operates one of the largest recycling businesses, and sells building materials through large do-it-yourself retailers. Its history page lists mill investments and acquisitions across many states, including Texas references to a gypsum wallboard plant, a Nolan County gypsum facility and the Pineland lumber complex. The corporate pages read for this listing do not name the Diboll operation, do not say what it takes in, and do not state its founding, services or certifications, so nothing here should be read as this facility's own account of itself. As described on gp.com, read 23 September 2026.

This is the second directory listing for a Georgia-Pacific operation in Diboll, Texas, at a separate street address, but the only pages that answered for it were the company's national corporate site. Those pages describe Georgia-Pacific as a Koch, Inc. company founded in 1927 in Augusta, Georgia, as Georgia Hardwood Lumber Company, and say it now has more than 150 locations worldwide, locations in nearly 30 states, over 30,000 direct employees and $2.7 billion in direct wages and benefits. The company says it makes consumer tissue, towel and tableware products under names such as Quilted Northern, Brawny and Dixie, supplies dispensers and hygiene products to businesses, produces pulp and corrugated boxes, operates one of the largest recycling businesses, and sells building materials through large do-it-yourself retailers. Its history page lists mill investments and acquisitions across many states, including Texas references to a gypsum wallboard plant, a Nolan County gypsum facility and the Pineland lumber complex. The corporate pages read for this listing do not name the Diboll operation, do not say what it takes in, and do not state its founding, services or certifications, so nothing here should be read as this facility's own account of itself. As described on gp.com, read 23 September 2026.

The crawled pages are Georgia-Pacific's company-wide corporate website rather than a page for the Pineland, Texas sawmill, so what they carry is a description of the parent company. Georgia-Pacific says it was "Founded in Augusta, Georgia, as Georgia Hardwood Lumber Company, a hardwood lumber wholesaler" in 1927, when it "Operated five sawmills in the South," and that it has "more than 150 Georgia-Pacific locations around the world," "30K+" employees and "locations in nearly 30 states," with "$15B" "Invested into GP operations since 2014" and "$2.7B" in direct wages and benefits. It is "a Koch, Inc. company," acquired by Koch in 2005 "to become a privately held, wholly owned subsidiary." Its product lines are grouped on the site as Building Products, Cellulose, Consumer Products, GP PRO, Packaging, Pine Solutions and Recycling, and it says its building materials are sold "at large do-it-yourself warehouse retailers" while household brands include Quilted Northern, Brawny and Dixie. On stewardship it states that it works to "maximize recycling, reduce energy use and set the standard in sustainable forestry." The site's history page records lumber investments including a "$100 million lumber production facility in Talladega, Alabama" and a "1 billionth boardfoot" milestone in Albany, Georgia, and past recognitions such as the "Sustainable Forestry Initiative President's Award" in 2009 and OSHA Star Level in 1992. Texas is named three times: in the state list of US locations, for a "$325 million gypsum wallboard facility in Texas" in 2023 and a Nolan County gypsum plant in 2020, and, for Pineland specifically, a single 2021 timeline entry stating that "Georgia-Pacific modernized Pineland, Texas, lumber complex, making it the largest sawmill in the South." No further detail on the Pineland operation, its products, contacts or timber buying appears on the crawled pages. As described on gp.com, read 23 September 2026.

Texarome, at 1585 East Ranch Road 337 in Leakey, Texas, distills and refines pure and natural essential oils, with Texas cedarwood oil at the center of its business. The company says it was "founded in 1982 by Gueric and Victor Boucard in an effort to carry on the family tradition of Essential Oil distillation that goes back to the 40's," and that it has since grown into "a multinational organization with key internal partnerships and production units that includes six separate distillation facilities, as well as three rectification units, and four major products," drawing on three generations of expertise and proprietary distillation technology. Texas cedarwood oil is called its flagship product, made from raw material sourced within 60 to 100 miles of the Texas facility, of which it says it processes "over 50 tons per day" before rectifying and packaging for shipment worldwide. It also produces Virginiana cedarwood oil, working with loggers and ranchers to use byproducts of the logging industry that "would often been thrown away or burned," with that material delivered from over 200 miles away; amyris oil distilled at its facility in the Baharuco Forest region of the Dominican Republic from dead, dry amyris wood gathered by farmers and collectors, then shipped to Texas for processing and quality control; and Haitian vetiver oil, tied to Victor Boucard Sr.'s pioneering of vetiver plantations in Haiti in the 1940s with partner Louis Dejois. The company states it is "the only Texas distillery with the refining facilities to redistill and blend Cedarwood oils and other essential oils according to the customer's exact specifications," and that its quality control laboratory uses a gas chromatographic apparatus to guarantee consistent composition. Listed services also include consulting, toll distillation and plant design and construction. As described on texarome.com, read 23 September 2026.

Textruss, Inc. manufactures and supplies wood roof and floor trusses from 12201 Dorsett Road in Austin, designing and making truss systems for residential and commercial clients in the Austin area and selling primarily in Central Texas. Its own account of the work ranges from the simplest designs through multifamily projects and high-end residential design to large commercial structures. The history page dates the business to 15 October 1970, when W.C. “Bill” Snow cleared one and three-quarters acres of brushy land near Austin and located the slab for the first building, with Jimmy Youngquist and Roscoe C. Morris as co-founders; the company was incorporated in 1971, Youngquist sold his stock in 1978, and a complete reorganisation followed on 16 July 1982 when Morris sold his. A further change of ownership in January 2000 brought in Ben Doyle as president and general manager, Allen Kalina as secretary and treasurer, Marvin Hale as vice-president and sales manager and Chuck Prasek as vice-president over the office and design. The site now covers nearly eight acres, with a two-storey office building of about 3,000 square feet, two manufacturing facilities totalling 30,000 square feet and lumber sheds, and the company reports fifty employees, many with fifteen to thirty years' service. It began with roof trusses and now produces floor trusses as well, uses southern pine exclusively, and runs its own fleet of four trucks for delivery, saying a Textruss man goes out immediately if problems arise on a builder's site. Memberships listed are the Austin Builders Association, the Austin Chamber of Commerce, the United States Chamber of Commerce, the BBB, TMAT, TCABA and TMTA. The pages carry a 2014 copyright notice, so the figures may be some years old. As described on textruss.com, read 23 September 2026.

Townley Lumber Co. describes itself as a family pallet manufacturer in Henderson, Texas, “Family Owned & Operated since 1943,” built “on strong values, dedication to family, hard work and integrity.” The about page places the operation “in the heart of East Texas’ timberland” and says the yard runs “two high volume sawmills and our three Viking Automatic Nailing Machines, onsite mold treatment facility, and heat treatment facility,” with Baker, Brewer and McDonough processing equipment and a year-round raw material inventory of “over 1,800 truckloads of pine and hardwood logs.” It states that “our workforce of 140+ employees proudly adheres to Texas OSHCON Voluntary Industrial Safety Compliance guidelines as we produce 15 truckloads of pine and hardwood pallets every day.” The services page sets out custom pine and hardwood pallets built to specification with computer-aided design, paint selection, chamfered deck boards, clipped corners and banding; clean, bark-free paper-grade wood chips; bulk saw dust for particleboard, mulch, litter and fuel; an in-house logistics company with its own tractor trailers, flat beds and dry vans; and a heat treatment facility built into the ground so pallets can be submerged in solution, after which they are dipped for mold prevention and, the site says, made “ready for exporting overseas.” On terms, it offers “guaranteed six-month pricing packages” with 30-day written notice before any increase, “1-percent 10-day early pay discounts or Net 30,” and emergency warehousing of pallet inventories. Some text is plainly dated, referring to a new mill “to be completed in the summer of 2020” and to “78 years” in business. The pages name no export or third-party certification, no product grading standard, and no minimum order size; quotes are handled by phone or a request form. As described on townleylumber.com, read 23 September 2026.

The Grandview entry is a Texas plant of a national corporation, and the site reached, ufpi.com, is the corporate site: the pages read describe the parent company as a whole and say nothing at all about the Grandview operation. The company states it was “founded in 1955 as Universal Forest Products” — the name this listing still carries — and that it “started by supplying lumber to a single market: factory built housing.” It now trades as UFP Industries on NASDAQ under the ticker UFPI, and its home page reports “196 Locations Worldwide,” “14,000+ Employees & Growing” and “$6.3 Billion Net Sales 2025,” with a head office at 2801 East Beltline NE, Grand Rapids, Michigan. Four operating segments — “Retail Solutions, Packaging, Construction and International” — are described as businesses that “manufacture and sell a wide variety of value-added products used in residential and commercial construction, outdoor living, packaging and other industrial applications worldwide.” The About page says the firm “began as a lumber company” and is today “a family of businesses that combines innovation, logistics, design, engineering, and value-added solutions to solve complex challenges.” The history page records that the company went public “issuing 5.7 million shares at $7 each” and that it “celebrates 70 years in business” in 2025. None of this is specific to Grandview. The corporate pages give no address, phone number, product list or capability for the Texas plant, and nothing on them addresses buying standing timber, a minimum tract size, or how work is quoted. As described on ufpi.com, read 23 September 2026.

Wampler Manufacturing, LTD provides custom saw milling services in Central Texas and specialises in Eastern Red Cedar lumber. Its product line, as listed on the site, covers beams, cedar flooring, cedar panelling, mantels, moulding and trim, peeled posts, cedar posts, cedar rounds and first cuts, and the site carries a client project gallery alongside pages for the business and its products. The yard is at 1416 Hwy 95N, Bastrop, Texas, and opening hours are given as Monday to Friday, 8am to 5pm, with a note that the business is closed on 24 and 25 December and open from 27 to 31 December. Orders are placed by telephone: the contact page asks customers to call to place an order, on 512-321-2916, which is the number held for this listing. The three customer comments reproduced on the home page are Google reviews, and they refer to buying cedar products for projects, to finding cedar remnants for small items such as bird houses, and to prices and staff. The site gives no founding year, no employee count, no certifications and no statement of the species bought in or the volume milled. The business is styled Wampler Manufacturing, LTD on its own pages, while this listing carries the name Wampler Manufacturing Company. As described on wamplermfg.com, read 23 September 2026.

Ward Timber, LTD. states that it was "Founded in 1978" and is "a 2nd generation, family-owned, timber company based in the heart of Northeast Texas," calling itself "A Leader in the Timber Industry for over 40 Years" and a buyer of "Timber and Timberland." The company says it "offers a broad range of forestry services to its clients throughout the four states region of Texas, Arkansas, Oklahoma & Louisiana" and "is also proud to offer an extensive wholesale sales inventory of specialty hardwoods and lumber" through WTC Lumber. Its main office is at 1101 US 59 (P.O. Box 360 for mail), Linden, Texas 75563, phone 903-756-7700, fax 903-756-8313; WTC Lumber is at 5090 Dick Price Rd., Fort Worth, Texas 76140, phone 817-371-5760. The site also lists a Mill section. Ward Timber says it has "a combined total of more than 300 years of forestry experience" and "a well-earned reputation for providing the most experienced, professional forestry and wildlife management services in the Four States region," with forestry services focused on "timber procurement and forest management as well as a broad range of other land management activities and objectives ensuring landowner goals are met"; a "free, personal consultation" with one of its foresters is offered. The founding partners are given as Bill Ward, a Bachelor of Science in Forestry graduate of Louisiana Tech University, and John Jones, a forestry graduate of the University of Missouri and former Nekoosa procurement officer; together they "have grown Ward Timber into a multi-faceted company that today employs over 200 employees and contractors." Head forester Mark Wilson (39+ years' experience, BS Forestry, Mississippi State University) is named as a member and former board member of the Texas Forestry Association and holds a Pro Logger Certification, as do foresters Thomas Parnell (34+ years) and Larry Butler (38+ years, Arkansas Pro-Logger Certification). As described on wardtimber.com, read 23 September 2026.

Gary Weeks and Company, at 112 West Spoke Hill in Wimberley, Texas, describes itself in its own headline as "An American Company of Artisans" and states its work simply: "We design and build furniture to the highest standards of craftsmanship, ergonomics, beauty, and longevity. We ship worldwide." The signature piece is the Weeks Rocker, sold under a plain promise that the chair "is guaranteed comfortable for you, or you may return it for a full refund. We'll pay the shipping both ways." Alongside the rockers, in cherry, walnut, maple, mesquite and porch versions, the company builds dining chairs it calls "strong, light, graceful, and comfortable," dining tables in "fine solid wood," barstools, footstools, side tables and custom desks, tables and cabinets, with customizing options including engraving, bronze plaques, inlay and carving, and published guidance on oil-finish and varnish repair. It sells direct rather than through dealers: "People find us in their web search for a rocking chair of distinction. They order. We deliver," and it says it has shipped "directly to people in every state and to Europe, Australia, Asia, Africa, and South America." Asked how a small custom shop earns that trust, the site answers with "the depth and detail of this website. NO COOKIES. NO POPUPS. NO ADS," its delivery and satisfaction guarantees, "our long and steady history," and "the words of more than 1500 patrons," counting 1,600 or more reviews and comments. The history page is written by Gary Weeks in the first person: in 1987 he and Leslie converted an implement shed on the old Latchford ranch into a wood shop, jacking up a falling roof and running wire and dust-collection pipe; by 1990 he had built a set of dining chairs and swore he'd never build another, then returned to chair design, built a fitting booth and invited "dozens of people to sit and suggest adjustments" before drawing the rocker. "Pecan being the state tree, and our market Texas, we started out making only pecan rockers." Their son Austin later joined the business. On material, the company says it is "imperative, and moral, to manage forests so that wood may be harvested in perpetuity," buys Forest Stewardship Council certified cherry, maple and mahogany where available (Collinswood for cherry and maple, sapele from FSC forests in the Ivory Coast, walnut from Irion Lumber uncertified), and a reprinted 2006 Northwest Certified Forestry profile calls Gary Weeks an "FSC certified furniture maker." The showroom is open by appointment, Monday through Saturday. As described on garyweeks.com, read 23 September 2026.

Wooden Pallets, LTD describes itself as "a specialty pallet and skid manufacturer serving the Gulf Coast of Texas and Louisiana," operating from Silsbee, Texas under the banner "Quality, Sustainability and Innovation - Reshaping the Pallet Industry." Its own account of its growth is specific: the company "began operations in 1983 with 15 people in a 14,000 square foot building," and today has 180 employees and more than 80,000 square feet of manufacturing floor space, complemented by "an adjacent 15 acre concrete pad that stores more than 600 truckloads of lumber and 100 truckloads of completed pallets year round." On capacity, the site says the plant "boasts infrastructure that includes six saw lines, eight automated and manual nail lines, producing over 15,000 pallets daily," and that the company "has traditionally processed an impressive 65,000,000 board feet of lumber and more than 3,000,000 pallets annually," delivered with "a modern fleet of 11 trucks and trailers, ensuring our clients always receive their pallet orders promptly." The products and services page leans on experience and design work: "With more than 30 years of experience in designing and building pallets and skids, our team of experts provide clients with solutions in packaging re-design to minimize costs without sacrificing quality." Three product themes are set out - Premium Pallets & Skids "intricately designed for superior quality and durability, with optimized loading features that enhance safety and efficiency"; a Pallet Designed System called "an intensive and comprehensive process that involves crafting pallets, adhering to precise dimensions, utilizing robust materials, and design principles"; and High Quality Material "selected for their exceptional strength and durability." Safety is presented as a formal program: "an all-encompassing safety protocol," including "regular external audits and internal safety evaluations" plus "compulsory weekly meetings focused on safety procedures and quality assurance." The company frames its promise around dependability - "We strive to earn our client's trust by consistently supplying high quality pallets and skids. Prompt and dependable customer service, and quality assurance contribute to the value our clients have come to expect" - and publishes customer testimonials from Inteplast Corporation, a supplier relationship it says has run 30 years, and from Louisiana Pigment Co., L.P., describing 15 years of pallets "always constructed to our specs and delivered on time." Navigation also lists Engineering & Design and Capacity sections, and the site invites visitors to request a quote by phone or form. As described on woodenpalletsltd.com, read 23 September 2026.

Arrington Lumber & Pallet Co. presents itself as an integrated pallet maker working from its own timber through to its own trucks. The home page states that “we mill our own lumber, build our own pallets, and deliver on our own trucks — out of Jacksonville, Texas, since 1963,” and adds “not a middleman in sight.” It gives the company’s history in its own words: “In 1963, E.C. Arrington started with a rented building, one helper, and one truckload of pallets a week,” with his son Eddie joining in 1972 and his grandson Kyle running the business today — “three generations, one standard.” The counters on the page claim four sawmills operated, more than 100 pallet sizes built, four states served and 60-plus years in business, and the process section adds “four sawmills, six nailing machines” and an owned delivery fleet, saying the operation was built “to own every step.” On products, the site says “over 100 sizes. Stringer or block. KD or green pine. Standard spec or fully custom,” and offers to “engineer it to carry what you need it to carry.” Customers are described as being across Texas, Louisiana, Oklahoma and Arkansas. The contact page gives a Jacksonville mailing address at PO Box 1900 and the telephone number (903) 586-4070, which matches the number on file, and promises that “someone who works here will answer.” The pages read give no certifications, no published prices, no minimum order and no mention of the crossties recorded for this mill in the state directory. As described on arringtonlumber.com, read 23 September 2026.

The site reached for this listing is lpcorp.com, the corporate site of Louisiana-Pacific Corporation, which brands itself LP Building Solutions; the pages read describe the company as a whole and carry very little about the Jasper plant itself. The home page says LP has “over 50 years of proven experience” and that “our integrated system of building materials helps you simplify your process, cut down on inefficiencies and future-proof your home.” The solutions menu covers siding and trim, sheathing and subflooring — including OSB sheathing, over-sized OSB, radiant barrier sheathing and fire-rated OSB sheathing — premium subflooring, and shed products. The company overview page says “LP has several locations across North and South America,” with headquarters in Nashville, Tennessee. Two items touch the Texas location. The locations page lists “Jasper, Texas” among LP’s OSB manufacturing locations, alongside Carthage, Texas and mills in Alabama, North Carolina, Québec, British Columbia, Chile and Brazil, which is consistent with the oriented strand board recorded as this listing’s product. And the news feed on the About LP page carries an item dated September 1, 2026 headlined “LP to Curtail OSB Production at Jasper, Texas Facility.” The crawl captured only that headline and not the release behind it, so the scope and duration of the curtailment are not established by the pages read; anyone relying on this record should confirm the mill’s current operating status directly. Beyond those two lines, the pages give no capacity, workforce, contact details, log or fiber purchasing terms, delivery requirements, minimum tract size or certifications for the Jasper mill. As described on lpcorp.com, read 23 September 2026.

The website recorded for this Carthage listing in Panola County, Texas is the corporate site of Louisiana-Pacific Corporation, trading as LP Building Solutions, and only corporate pages came back when it was read. Those pages describe a company with what it calls over 50 years of proven experience, headquartered in Nashville, Tennessee, with administrative offices in the United States and South America and manufacturing plants across North and South America, making siding and trim, sheathing and subflooring, and shed panel products, including oriented strand board. Its locations page lists Carthage, Texas as one of its oriented strand board manufacturing locations, which is the only reference to this site anywhere in the pages read; beyond that entry in a list, the corporate pages say nothing about the Carthage plant itself, neither what it takes in, when it opened and how large it is, nor its hours, contacts or how it quotes, so nothing here should be read as this mill's own account of itself, and the company history and product claims above belong to the parent rather than to the Carthage operation. A company news item dated 1 September 2026 concerns curtailed oriented strand board production at the separate Jasper, Texas facility, not Carthage. As described on lpcorp.com, read 23 September 2026.

M & H Crates, Inc. describes itself on its home page as a “pallet manufacturer and supplier, building to spec per customer design.” The ‘Who We Are’ page carries the company’s own account of its history and ownership: “Established in 1968, M&H Crates is now under the 3rd generation of leadership with strong ties to Texas A&M University,” followed by the statement that “M&H Crates is an employee owned company.” On what it makes, the same page says the company “can manufacture new pallets to any customer specification using the Pallet Design System” and that it offers “from standard sizes to custom designs,” adding heat treatment and delivery services “to make the process as easy as possible.” Its stated mission is “to provide our customers with the highest quality pallets at competitive prices,” and the home page sets out three selling points — quality products, custom solutions and exceptional service — in general terms rather than with specifics. The contact page gives the address as 4022 FM 347 North, Jacksonville, Texas 75766, which differs from the 402 FM 347 N on file, and the telephone number 903-683-5351, which matches. Business hours are Monday to Friday 07:00 to 16:00, closed 11:00 to 12:00 for lunch, with weekends closed, and visitors are invited to call in person during those hours. The pages read name no certification — heat treatment is offered but no ISPM-15 or other mark is claimed — and give no sawmill or plywood detail, no staff names, no capacity figures, no lead times and no prices. As described on mhcrates.com, read 23 September 2026.

westrock.com now redirects to smurfitwestrock.com, and the pages read are the global corporate site of Smurfit Westrock rather than anything about the Evadale mill. That site presents the company as a sustainable packaging manufacturer: it states that “in 2025, we manufactured 220 billion square feet of corrugated packaging and hold strong supply positions in the solid board, folding carton, and Bag-in-Box markets,” and that “we manufacture a wide range of renewable, recyclable and recycled paper and board, with a capacity of approximately 23 million tons per annum.” Its recycling page says that “with 63 recycling plants worldwide, we process approximately 14 million tons of recovered fiber annually across our 62 paper mills,” and describes closed-loop collection of used paper and cardboard from commercial customers, bought “at competitive rates.” On fibre supply it states: “We source fiber from small, private landowners as well as our own forests which are FSC and/or PEFC certified. All forests from which we source fiber are chain-of-custody certified,” and elsewhere that the “paper mill system is 100% CoC Certified.” Product pages cover corrugated, e-commerce, food-contact, foodservice, paperboard, protective packaging, bags and sacks, and display design. Careers material refers to “more than 500 locations worldwide,” and would-be suppliers are asked to complete a form on the Supplier Resources page, which is the only route the site offers a vendor or landowner. Nothing read names Evadale or the FM 105 mill, says what it produces or buys, or gives a local contact; the certification statements quoted above are made for the company’s system as a whole and not for this Texas location. As described on smurfitwestrock.com, read 23 September 2026.

The address on file for this Somerville, Texas site leads to koppers.com, the worldwide corporate site of Koppers Inc. rather than a page for the Somerville operation. The pages read carry no mention of Somerville, of Texas, or of any local phone or street address - the only contact given is the Pittsburgh head office at 436 Seventh Avenue - so nothing here describes what the Texas plant does, and readers should treat the material below as the parent company's account of itself. Koppers describes itself as "a leading provider of wood- and carbon-based technologies, products, chemicals, and services that strengthen our global infrastructure," working to "build, maintain, and improve our global infrastructure through environmentally responsible solutions." Its stated purpose is "Protecting What Matters and Preserving The Future," and its safety commitment is branded Zero Harm. The company's origin story is that it "dates back to the early 1900s, when German engineer, Heinrich Koppers, put himself at the forefront of sustainability by creating a new kind of coke-oven furnace that recovered byproducts for other uses rather than releasing them into the atmosphere." "What started as a Pittsburgh-based company more than 100 years ago has since grown to span several continents," with locations in North America, South America, Australia, New Zealand and Europe. Products are grouped as Wood Enhancement Technologies, Railroad, Utility & Industrial, Carbon & Coating Solutions and CPRO for advanced battery anode materials. The Railroad business makes "treated wood products [that] help build and preserve critical railroad infrastructure," including crossties; the Utility business covers "quality wood poles, cross arms, piling, and more," and the site claims Koppers is "the largest utility pole manufacturer in the U.S.," serving investor-owned groups, cooperatives and municipal utilities. The Performance Chemicals team "develops innovative wood-preservative and fire-retardant chemicals and technologies for decking, fencing, utility poles, and pressure-treated commercial construction lumber" and supports customers "in more than 70 countries." Carbon products listed are carbon pitch, creosote and naphthalene. Services are Recovery & Reuse - "servicing the full life cycle of your railroad crossties and utility poles... turnkey solutions for all forms of wood waste recovery, disposal, and recycling" - plus Research & Innovation and Carbon Material Testing through the Koppers Global Technology Center. The company describes a vertically integrated model "united by wood preservation technologies across diverse markets," and points to its 2025 Sustainability Report, a refreshed 2030 strategy and a 20th anniversary on the NYSE. As described on koppers.com, read 23 September 2026.

Acacia Hardwoods is a wood products retailer at 4614 130th St. (FM 1585) in Lubbock, Texas, with store hours of 8:00 to 5:00 Monday through Friday and 8:00 to 12:00 Saturday. Its catalog is organised into domestic hardwoods including alder, ash, basswood, birch, aromatic cedar, cherry, African and genuine Honduran mahogany, hard and soft maple, red and white oak, pecan/hickory, sugar pine, poplar and walnut; specialty hardwoods such as birds eye maple, cedar mantles, mesquite, myrtle, osage orange, quilted maple, soft curley maple and Spanish cedar; and a long list of exotic woods including bocote, bubinga, cocobolo, ebony, jatoba (Brazilian cherry), kingwood, koa, lacewood, padouk, pink ivory, purple heart, Honduras rosewood, teak, wenge, yellowheart, zebrawood and ziricote. The company also stocks plywood in species such as Baltic birch, knotty pine, meranti (lauan), okoume and radiata pine, sheet goods, sheet veneer including burl and quarter sawn options and special order veneers, hardwood dowels, biscuits, iron-on edge banding, plugs and buttons, sandpaper and sanding accessories, cabinet hardware such as hinges and ball bearing drawer guides, bulk screws, finishes including lacquer, polyurethane, Minwax stain and Danish oil, Titebond and polyurethane glues and wood fillers, and pen kits with pen blanks. The site offers a downloadable PDF catalog with prices, a product request form, and states "We Deliver!" On its About page the company says the late Ray J. Diekemper, Jr., an independent crude oil producer and head of RJD Management Co., Inc., purchased the company in 1996 and that after his death in late 1999 Mrs. Lou Diekemper took over operations and became President, aiming "to offer quality wood products at a reasonable price" and to keep alive his "passion of wood and conducting honest business practices." As described on acaciahardwoods.net, read 23 September 2026.

Fort Worth Lumber Company presents itself as a wholesale building-supply house with a mill and a truss plant on site, under the line “Your hometown source for all your lumber needs.” The home page states: “We offer a Full Mill On-Site, Custom Roof and Floor Trusses. We offer a A Full Line of Nationally Known Building Products.” Of the mill it says, “We can manufacture any and all types of wood siding patterns, tongue and groove flooring, beaded ceiling patterns, and some moldings with our eight inch molder in our mill.” Of trusses: “We use Computer Aided-Design software from ALPINE Engineering to design and build custom trusses in our truss plant. Utilizing ALPINE fasteners we can manufacture trusses which are optimized for your specific needs.” It carries products from Georgia Pacific, Weyerhaeuser, Tamko, Simpson Strong-Tie and Louisiana-Pacific, is “now a Trex stocking dealer,” and points to a sister company, Fort Worth Sash and Door. The about page gives the history: “Fort Worth Lumber Company began in 1893 as H.H. Hardin Lumber Company on East Terrell Street in Fort Worth, Texas,” was renamed Fort Worth Sash and Door in 1946, took its present name in 1963 and moved to South Freeway in 1970. It is “both a family owned and operated business”; Robert Fiesler took over in 1955 and his daughter Emily continues it, and staff are named down to yard supervisor, truss manager and mill manager. The yard is at 9101 S. Freeway, open Monday to Friday 7:00am-5:00pm, and enquiries go to (817) 293-5211. The site says nothing about buying standing timber or logs, holds no certification out, and publishes no prices; a credit application is offered and quoting appears to be by phone. As described on fortworthlumber.com, read 23 September 2026.

The website on file for this listing is the corporate site of Idaho Timber Company, and the pages reached describe the national company rather than the Fort Worth plant. The home page bills it as a “National Timber Company” offering “exceptional manufacturing, mill-direct just-in-time delivery and prompt, professional service,” and states: “We’ve positioned our production sites strategically across the United States to serve you best. Our plants are capable of shipping 65 million board feet of lumber products each month!” A locations menu lists Idaho, Florida, New Mexico, North Carolina and Texas, and the senior team list includes a “GM of Texas Facility” — the only reference to this state on the pages read. The contact page gives a main office at “3540 E. Longwing Ln, Suite 270” in “Meridian, Idaho 83646” with an Idaho phone number and a toll-free line; the Fort Worth address and number in this listing appear nowhere on it. The team page sets out management history, saying its president and chief executive “joined Idaho Timber in 1990 as the General Manager for the Home Center Division,” was promoted to president and chief operating officer in April 2000 and named chief executive in 2005, and it also names a vice president and chief financial officer and a vice president of human resources and general counsel. What the pages do not carry is anything local: no founding date for the company, no certifications, no account of what the Fort Worth operation produces, the species it runs, its capacity, or any minimum order or tract size. Those would have to come from the company directly. As described on idahotimber.com, read 23 September 2026.

The directory record for this Saginaw, Texas location points to the company-wide corporate website of UFP Industries, the parent business formerly named Universal Forest Products; the pages are corporate in scope and say nothing specific about the Saginaw operation or any Texas address. Company-wide, the site describes a manufacturer that “began as a lumber company” and was “Founded in 1955 as Universal Forest Products,” supplying lumber to a single market, factory built housing, before broadening. It now states it “supplies thousands of products that support the world’s physical infrastructure,” organised into four operating segments — Retail Solutions, Packaging, Construction and International — which it says “manufacture and sell a wide variety of value-added products used in residential and commercial construction, outdoor living, packaging and other industrial applications worldwide.” Headline figures given are 196 locations worldwide, “14,000+ Employees & Growing,” more than 15,000 people and hundreds of affiliates, “71 Years of Service,” 33 years as a publicly traded company and “$6.3 Billion Net Sales 2025”; the company trades as NASDAQ: UFPI and lists a corporate address in Grand Rapids, Michigan. The history page records that its Auburndale, Florida plant produced the first charge of treated lumber in 1978 and that UFP is “one of the world’s largest lumber pressure-treaters,” and that in 1997 Universal entered the site-built construction market “with acquisitions in Pennsylvania, Texas and Colorado.” The company name changed to UFP Industries in 2020. As described on ufpi.com, read 23 September 2026.

El Paso Truss, Inc. presents itself on its own site as a truss manufacturer working from 9931 Railroad Drive in El Paso. The home page carries the line “Manufacturing Trusses Since 1976” and describes the firm as “a leading truss manufacturer in the southwest,” providing “high-quality trusses for a diverse range of projects, including commercial, residential, and custom builds,” with “nearly five decades of experience.” The about page states that “Since 1976, El Paso Truss has established a strong reputation for outstanding customer service and unwavering dedication to our clients,” and says it is “more than just a truss supplier” but “a trusted partner to contractors across El Paso, Southern New Mexico, and West Texas.” Its mission statement speaks of combining “technical expertise with a customer-centric approach to delivering superior truss solutions at competitive rates.” Work is quoted through a “Get A Quote” form or by phone at 915-751-0025; business hours are given as Monday to Friday, 7:00 AM to 4:00 PM, with Saturday and Sunday closed. The three pages read — home, about and contact — are short and promotional. They say nothing about plant capacity, the species or grades of lumber used, design software or engineering review, the credentials of staff, any certification or trade-association membership, or how trusses are priced and delivered. A reader looking for those details would have to ask. As described on elpasotruss.com, read 23 September 2026.

Vintage Woodworks is a direct-to-customer supplier of decorative architectural millwork, heading its pages "Architectural Details Direct." The site says the company was "Founded in 1978" and has "become the largest business of our kind," serving "Hundreds of thousands of wonderful customers all across the United States and Canada" with what it calls "small-town friendly service" and the slogan "Bringing Back Yesterday in Quality & Service since 1978!" Its catalogue covers porch components, listing porch posts, columns, newel posts, balusters (spindles), rails and handrails, brackets, spandrels, running trim, gable decorations, kickspace blocks and porch flooring, alongside solid-wood screen and storm doors, cedar shingle siding, roof spires, finials, shutters, louvered vents, sunburst fans, interior stair parts, and interior trim such as baseboard, beadboard and V-groove, door and window casings, corner and base blocks, crown mouldings and ceiling medallions. Materials named include cedar, hemlock, redwood, pressure-treated YellaWood, polyurethane, and AZEK and TimberTech cellular PVC and composite lines, for which the site reproduces the manufacturers' "Lifetime Limited Warranty and Fade/Stain Warranty" coverage and installation guides. It states that "Most items now available in synthetic woods that look, feel, and sound like painted wood but never crack, warp, or rot!" For do-it-yourself buyers it offers an "Online Porch Guide", casing and baseboard installation manuals, baluster and beadboard calculators, a free personalised porch consultation and a free porch design book, plus gift certificates and a guarantee promising "a prompt, courteous refund" to any customer not satisfied before finishing, modification or installation. An environmental-commitment section argues harvesting keeps private land forested, noting that "70% of US forests are privately owned, and 90% of the wood harvested in the US is from these private forests." The company describes itself as "still handcrafting from solid wood." As described on vintagewoodworks.com, read 23 September 2026.

The pages crawled here are International Paper's company-wide corporate site rather than a page for the Queen City, Texas operation; the crawled text never names Queen City or Texas, and individual sites are reachable only through unexpanded "Locations" and "Where to Find Us" navigation links, so nothing on these pages describes the Texas plant itself. The company presents itself as "International Paper (NYSE: IP; LSE: IPC) is the global leader in sustainable packaging solutions," adding that "Together with our customers, we make the world safer and more productive, one sustainable packaging solution at a time." Its listed products and services cover corrugated packaging, bulk packaging, solid fiber, sheets, retail packaging and display, containerboard, recycling solutions and recyclable materials, an OrderIP ordering system, and packaging services spanning structural design, graphic design, printing, testing, fulfillment and assembly, and mechanical packaging, aimed at eCommerce, food and beverage, grocery and retail, manufacturing, personal care, and shipping and distribution customers. The structural design page states the company employs "a globally connected team of 250+ designers utilizing over 1.8 million designs," and describes a Cost Savings Value Creation (CSVC) evaluation process, a CPSconnex design portal, 3D renderings, IP4D augmented reality models, and "Box 101," a two-day training session at its Customer Commitment Center in Aurora, IL. Graphic design work is supported by a photo studio and soundproofed media room at a Memphis, Tennessee customer commitment center. Print offerings listed are digital, litho lam and litho label, direct print, preprint, and inks and plates. News items mention the acquisition of North Pacific Paper Company, a new packaging facility in Mississippi, and being named one of the "2026 World's Most Ethical Companies." As described on internationalpaper.com, read 23 September 2026.

The site reached for this listing is sonoco.com, the corporate site of Sonoco Products Company, and the pages read describe the global packaging business rather than the Jefferson, Texas plant named in this record, which is not mentioned anywhere on them. The company says it has “been around since 1899” and “traces its roots back to 1899 in the small town of Hartsville, South Carolina,” and describes itself today as “a multi-billion-dollar enterprise with approximately 22,000 employees working in 265 operations in 37 countries.” The North American home page bills “125+ years of excellence” and states that Sonoco provides “innovative packaging solutions across various industries, including beauty and personal care, food and beverages, pet care, household products, construction, electronics and appliances, and healthcare.” The product navigation is the closest the pages come to the wood spools recorded for this listing: under industrial packaging it carries a “Reels, Spools & Plugs” category that includes wood reels alongside plastic spools and reels, polyfiber reels and steel reels. A recycling page adds that “we pick up wooden reels FREE, saving you time and money while preserving our natural resources,” and that “Sonoco Recycling has been collecting thousands of truckloads of viable used reels for over 20 years. We repair, refurbish and return the reels to circulation for reuse.” The services pages otherwise cover recycling — the company calls itself “a leading top 10 U.S. recycler” collecting “3 million tons of paper and other materials annually” — and in-house design and testing. The pages give no address, phone, capacity, staffing or hours for the Jefferson site, and say nothing about buying timber or logs, a minimum tract size, or certifications applying to this plant. As described on sonoco.com, read 23 September 2026.

The pages gathered for this listing are West Fraser Timber Co.'s corporate website, not a site for the Nacogdoches operation, so what follows describes the parent company; the web address carried on this record, norbord.com, now leads to that corporate site, and West Fraser says it acquired Norbord, "the world's largest OSB producer," in 2021. West Fraser calls itself "a diversified global wood products company producing renewable building materials" and "one of the world's largest producers of renewable wood building products, with more than 50 facilities in Canada, the United States, the United Kingdom and Europe." Its quick facts list roughly 10,000 employees, 32 lumber mills, 15 OSB mills, 9 engineered wood mills and 2 pulp and paper mills. Products named are OSB, lumber, plywood, LVL, MDF, particleboard and pulp, with sourcing and harvesting practices the company says are "backed by globally recognized forest certifications." The history pages trace the business to September 1955, when the Ketcham brothers bought Two Mile Planing Mills Ltd. in Quesnel, B.C., for $60,000; the West Fraser name was applied in 1958 and adopted company-wide by 1966. The company states it accelerated U.S. expansion in 2007 by acquiring 13 mills in states including Texas, becoming "the largest softwood lumber producer in North America," and that it marked its 70th anniversary in 2025. Its stated values are safety, integrity, frugality, competitiveness, fun, teamwork, humility and trust. Nothing on the crawled pages refers to Nacogdoches. As described on westfraser.com, read 23 September 2026.

This Schertz, Texas listing resolves to ufpi.com, the single corporate site shared by the whole UFP Industries group (the company was known as Universal Forest Products until a 2020 rename), so everything below is company-level material rather than anything about the Schertz site, which the crawled pages never mention. The site presents UFP as a manufacturer whose heritage “goes back to our founding in 1955,” when Universal Forest Products incorporated with factory-built housing as its sole market, and which today describes itself as “a family of businesses that combines innovation, logistics, design, engineering, and value‑added solutions to solve complex challenges.” Its four operating segments are Retail Solutions, Packaging, Construction and International, selling products used in residential and commercial construction, outdoor living, packaging and other industrial applications. The history page traces the milestones behind that range: first treated lumber in 1978 and a claim to be “one of the world’s largest lumber pressure-treaters”; the first load of treated lumber shipped to a then-new Home Depot in 1979; entry into site-built construction in 1997 through acquisitions in Pennsylvania, Texas and Colorado; becoming “the nation’s largest site-built residential truss manufacturer” in 1998; composite decking and the Deckorators railing brand from the early 2000s; and, after acquiring PalletOne and Spartanburg Forest Products in 2021, being “the largest pressure treater in the world.” Stated scale is 196 locations worldwide and over 14,000 employees. As described on ufpi.com, read 23 September 2026.

The web address on file for this Silsbee, Texas operation resolves to ufpi.com, the company-wide corporate site of UFP Industries, the parent formerly named Universal Forest Products - not a page about the Silsbee plant. Nothing on the pages read names Silsbee, gives a Texas phone number or address, or describes what is made there; the single Texas reference in the whole site is a 1997 history entry saying the company "enters the site-built construction market with acquisitions in Pennsylvania, Texas and Colorado." What the corporate site does say is this. "Founded in 1955 as Universal Forest Products, we started by supplying lumber to a single market: factory built housing. Over time, as our customers' needs evolved, so did we." Today it describes itself as "a family of businesses that combines innovation, logistics, design, engineering, and value-added solutions to solve complex challenges," supplying "thousands of products that support the world's physical infrastructure." It reports more than 15,000 people and hundreds of affiliates, and posts headline figures of 196 locations worldwide, 14,000+ employees, $6.3 billion in net sales for 2025, 33 years as a publicly traded company and 71 years of service, trading on NASDAQ as UFPI from a Grand Rapids, Michigan headquarters. Its four operating segments - Retail Solutions, Packaging, Construction and International - "manufacture and sell a wide variety of value-added products used in residential and commercial construction, outdoor living, packaging and other industrial applications worldwide." The company's history page traces pressure treating to its Auburndale, Florida plant in 1978 and claims UFP is now "one of the world's largest lumber pressure-treaters," with the 2021 Spartanburg Forest Products acquisition making it "the largest pressure treater in the world"; the 2020 acquisition of PalletOne is described as bringing in "the leading manufacturer of new pallets in the U.S." The name change from Universal Forest Products to UFP Industries is dated to 2020. Culture pages stress "No Mission Statement. Just People on a Mission," promoting from within, and an average senior-executive tenure of 23.3 years. Recent newsroom items listed are about expanding structural packaging capacity in South Carolina and acquisitions extending PalletOne's pallet network - again, none about Texas. As described on ufpi.com, read 23 September 2026.

This listing is a Texas treating plant, but the only site reached was ufpi.com, the corporate site of UFP Industries, and nothing on the pages read touches the Huntsville operation: no local address, no local telephone number, no description of the plant, its capacity or what it runs. The register still carries the company's earlier name, and the About page accounts for that, saying the business was "Founded in 1955 as Universal Forest Products" and that it "started by supplying lumber to a single market: factory built housing." That 1955 date belongs to the corporation rather than to this plant, so no founding year is recorded for this record. The history page does show when the parent entered the work this listing describes: under 1978 it says "the company's Auburndale, Florida plant produces Universal's first charge of treated lumber," and adds that "today, UFP is one of the world's largest lumber pressure-treaters"; under 2021 it says the acquisition of Spartanburg Forest Products made "UFP Industries the largest pressure treater in the world." The corporate name changed in 2020, when "Universal Forest Products changes its name to UFP Industries" and the company reorganised into market-based segments, now given as Retail Solutions, Packaging, Construction and International. Head office is 2801 East Beltline NE, Grand Rapids, Michigan, and the home page reports "196 Locations Worldwide," "14,000+ Employees & Growing" and "$6.3 Billion Net Sales 2025." A reader looking for what the Huntsville plant treats, what sizes it handles, whether it sells locally or whether it buys timber in the area will find none of it on these pages. As described on ufpi.com, read 23 September 2026.

East Texas Truss, LLC describes itself as “a family-owned and operated business specializing in the custom engineering and precision manufacturing of high-quality wood truss systems for residential and commercial construction,” working under the tagline “The Only Limit Is Your Imagination.” The single page reached states that it has been “proudly serving Texas and Louisiana since 1992” and that it supplies “wholesalers, contractors and the general public.” On capability, it says it designs and manufactures “roof trusses spanning up to” 70 feet and “floor trusses up to 35 feet,” which it presents as “ensuring superior strength, reliability, and efficiency for a wide range of structural applications.” Those spans are truss dimensions, not any kind of land or order minimum. The product menu lists common, scissor, attic, vault, cathedral and mono roof trusses, floor trusses and hip systems, and a banner invites enquiries about “our new architectural/engineered timber trusses.” The site says its primary service area is Texas and Louisiana, where it works “closely with builders, contractors, and developers,” and that it also has “the capability to ship nationwide.” A short marketing section argues that engineered trusses lower material costs through clear spans, eliminate interior bearing walls, beams and columns, provide “low cost engineering and windstorm solutions,” and reduce labour and waste. The page carries a toll-free number, 1-800-256-2276, rather than the local Hillister number in this listing, and gives no street address. It names no engineering registrations, no truss plate supplier or third-party certification such as a quality-control programme, no lead times, and no pricing or quoting procedure beyond “call for details.” As described on easttexastruss.com, read 23 September 2026.

Houston Hardwoods, Inc. describes itself as a lumber yard and custom milling business on West 34th Street in Houston. Its about page states that “Tim McCoy (president) and Guy Pike (vice president) founded Houston Hardwoods in 1990”, that in the first year the two men “handled every aspect of the company themselves, from buying & selling to milling & delivering”, and that the business now “operates from a 50,000 square foot location that includes office space with approximately 20 employees.” It says moulders were added to the equipment line after the first five years and that “the company’s two SCMI moulders streamline the production process.” On stock, the site offers “hardwoods, exotic woods, cabinet and marine grade plywood, MDF, melamine, softwoods”, edgebanding and veneer, claims “one of the largest selections of custom mouldings in Texas” with a database of “3,000+ profiles”, and states a moulding turnaround of “1-2 days”. The services page sets out milling to customer specification — S2S, S2S1E, S4S and SLR1E — with “Sanding – Max width 42”” and “Resaw – Max width 15””, and says customers can “purchase time on our equipment, like our wide belt sander”. Delivery runs “throughout Greater Houston and surrounding areas”, with the note that “if you’re within approximately 90 miles of us, we likely serve your location.” Staff are listed by years of industry experience and university degrees rather than trade certifications, and the company reports membership of the Lumbermen’s Association of Texas & Greater Louisiana and the Greater Houston Lumber & Building Materials Association. The pages carry no price list, no minimum order and no account of how a job is quoted beyond an invitation to contact the yard. As described on houstonhardwoods.com, read 23 September 2026.

Precision Gun Works, Inc. manufactures semi-finished replacement gunstocks under the banner "Finest Quality Semi-Finished Gun Stocks Since 1979." The company's own history says it began as Columbia Precision Woodworking in Uvalde, Texas in 1979, when Charlie Jones purchased the business and began making precision-machined buttstock patterns using his personal rifle collection as models, working with his son Gary; the pair added other rifle and shotgun stocks, moved the business to Kerrville, Texas and expanded the manufacturing facility, and in 1993 bought a "highly precise, state-of-the-art, twelve-spindle Italian carving machine." Gary Jones purchased the business from Charlie in 1998, and the company says it now markets several thousand pieces each year. All stocks are made from American black walnut selected from the midwestern United States, properly dried and hand-selected before machining; the firm states it offers no other species, machines quarter-sawn or edge grain where the blank allows, and does not cut buttstock and forearm from the same blank, though it matches sets as closely as it can. Stocks are fully contoured, machined approximately 1/16" oversize with inletting left slightly tight (about .005 to .010"), left unfinished and undrilled, and are said to be smoothed by an exclusive "SmoothCut" carving process; the company is explicit that its stocks "will not 'drop-in fit' any rifle or shotgun." Patterns cover Winchester, Marlin, Remington, Stevens, Colt, Rossi and cowboy action models, plus buttplates and other products. It is not machining fancy or figured wood, customers' wood, custom stocks or single-copy duplication, and states that "IF YOU DO NOT SEE AN ITEM LISTED, WE DO NOT MANUFACTURE IT." Sales are internet-based through the website only, with no telephone sales, consultation or walk-in retail outlet. As described on precisiongunstocks.com, read 23 September 2026.

Only the home page of Smith Wood Products answered the crawler, so everything here comes from that single page. It presents the company as a custom wood products and woodworking shop in Fort Worth, headed “Ready to turn your ideas, out of wood!” Under “Why Choose Smith Wood?” the page claims “Nearly 50 years of experience (since 1976),” a “Turnkey approach, simplifying the entire process,” and custom woodworking expertise — “We specialize in bringing your conceptual ideas to life” — together with material versatility, saying the shop is “Capable of incorporating other mediums into custom product designs and secondary operations.” A product strip names dowels, custom wood turnings, wood mouldings, flag and banner parts, wood handles, and wood balusters, columns and stair parts, with a gallery link for the rest. The page offers a free quote, describes the business as a “USA Company” with “Fast Shipping” and online support, and gives a head office at “4220 Clay Ave” in Fort Worth with a single phone number; the footer carries the corporate name “Smith Wood Products LTD.” One customer testimonial, signed with a first name and a Boston address, is printed on the page. The page states no species handled, no production capacity, no certifications, no staff credentials, no minimum order quantity, and no basis for pricing beyond the request-a-quote form — and no about or gallery page was reachable to fill those gaps. As described on smithwood.com, read 23 September 2026.

AES Custom Wood's site describes a family millwork shop in Grand Prairie working for the Dallas–Fort Worth homebuilding market. A banner on every page reads “Proudly Serving North Texas Since 1981,” and the About page gives the origin: “A.E.S Custom Wood, was founded in 1981 by Arvil E Smallwood,” who obtained “facilities in Grand Prairie, TX and setting up shop” and “began producing Fireplace mantels after contracting with a local new home builder.” That remains the core of the work — “offering DFW area new homes quality Fireplace Mantels” — and the page says the range has widened since: “we now offer everything from fireplace mantels, outdoor pergolas, custom cabinets and cutting boards.” It states that “over the 35+ years our company remains a family owned and operated business,” a figure that has not been brought up to date against the 1981 founding given on the same page. The page closes, “If you can dream it, we can build it.” Enquiries go to a single office line, (972) 262-0755, through a short contact form, with a gallery as the only other section. The pages read are brief. They say nothing about the species or sourcing of the wood used, nothing about lead times, pricing or how a job is quoted, and name no certification, grading body or trade membership. There is no mention of buying timber or of any minimum job size. As described on aescustomwood.com, read 23 September 2026.

Abilene Millwork says it designs and creates one-of-a-kind cabinets, countertops and architectural wall coverings, serving both residential and commercial clients. Its offices and millwork shop stand in the Historical Downtown Warehouse District of Abilene, Texas, in the building that once housed Abilene Sash & Door Company, and the company states that since 2000 it has been part of different projects, providing not only fine cabinetry but also design solutions. It sets out its process in three steps: designers draft the project and source materials intended to stay within the budget, the pieces are built at the company's own manufacturing facility in downtown Abilene, and its installation crews fit the finished work. On countertops it offers stainless steel, wood, solid surface or MDF core, each piece cut to the customer's own dimensions. Its woodworking covers custom cabinetry, wall coverings, countertops and other features, and it names First Financial Bank, Abilene Christian University, Abilene ISD and Wylie ISD among its clients, adding that no job is too big or too small and that every job is custom built to suit the space. Free estimates are available while a construction budget is being drawn up. Enquiries are taken by telephone on 325-677-8856 or through a form on the contact page, which asks whether the interest is general commercial work, cabinetry and countertops, or architectural wall covering; the shop address given is 533 Plum St., Abilene, TX 79601. As described on abilenemillwork.com, read 23 September 2026.

Alamo Hardwoods is a lumber supplier and millwork shop at 1 Fredericksburg Road in San Antonio, Texas, which says it has "handled Central and South Texas' millworking, molding and other custom woodwork needs since 1921" and is "still providing the lumber San Antonio is made of." The company states that it houses "one of the most varied soft, exotic wood and hardwood lumber supplies Texas has to offer," publishes a list of the hardwoods it offers, and highlighted cypress, walnut and zebra wood as a month's top sellers. Alongside lumber sales it offers custom millworking, custom moldings that can match a historical property, fireplace mantels, and custom and butcher block countertops, plus work on historic structures, saying that "With our experience and expertise, your vintage property will remain vintage." Its design services page states that "In nearly a century of business, we've done just about everything," listing custom design work covering furniture, cabinets, fireplaces, surrounds, pediments, banisters and "Boat and aircraft interiors," and says its designers can work from blueprints and detailed designs or from a sketch or a description. The company says it is staffed by "architecture graduates and students, forestry specialists, design experts, and second- and third-generation veterans of the soft and hardwood supplies industry" and describes itself with the line "We're not salesmen — we're craftsmen." A molding profiles catalog is offered for download to design professionals and contractors, and visitors are invited to the showroom for a guided tour of what it calls a "veritable shrine to hardwood!" Hours are Monday to Friday 8:00 a.m. to 5:00 p.m. and Saturday 8:00 a.m. to noon. As described on alamohardwoods.com, read 23 September 2026.

Austin Wood Works, Inc. describes itself as "a true custom cabinet company" that has "been crafting fine custom cabinetry for custom builders since 1980," with a factory "located near Austin, TX." Its office, showroom and manufacturing address is 13051 Hero Way West, Bldg. B, Leander, Texas 78641, with mail going to PO Box 2229, Leander, Texas 78646-2229; the office line is (512) 259-3373 and the fax (512) 259-3595. The company calls itself "a turnkey operation, providing a complete cabinet package, with excellence in quality, service, and customer satisfaction being our goal," and says it works on new construction, kitchen remodels and complete renovations. It sets out its process in its own words: designers help clients "by using computerized design programs, samples, photographs and years of cabinet knowledge," and the company will "field measure your project, provide you with CAD drawings, build, finish and install your cabinets," with "a team of trained service personnel" seeing projects through "from start to finish." Visitors are invited to "visit our showroom, see our displays and talk with us about your project." The site's product pages cover cabinet styles, cabinet specifications, wood and finish options, doors and accessories, knobs and pulls, replacement parts, and a section on determining the cost of cabinets, alongside contemporary, transitional and traditional portfolio galleries. Lindsay Fazand is listed as Registered Interior Designer #10913 and a Certified Kitchen and Bath Designer, and the site explains the National Kitchen and Bath Association's requirements for a fully qualified designer. The stated mission is "To be the most preferred provider of fine custom cabinets through superior service and product," with "customer references available upon request." News and portfolio items cite the 2021 Austin AIA Home Tour and HGTV Smart Home 2015. As described on austinwoodworks.com, read 23 September 2026.

B-Squared Woodworks, Ltd. describes itself as a custom cabinetry and millwork shop working in the greater Austin area. Its home page is headed “The Finest Quality Custom Cabinetry” and “Since 1995,” and states that the firm “provides custom cabinetry and millwork that will be the perfect addition to your home or office,” that “every piece is handmade,” and that customers discuss what they want with “one of our experts” before a piece is designed and made. It claims “Over 20 years of woodworking experience” and says “We’ve provided woodworking and millwork to Austin, Texas and the surrounding communities since 1995,” adding that the team “will work with you to design a custom set of cabinets that reflects your aesthetic tastes.” The contact page lists what the shop offers as reasons to choose it: “Unparalleled craftsmanship,” “Individual customer attention,” “Collaborative design process,” “Design drawings are provided,” and “A wide selection of green building products are available.” Menu sections cover custom woodwork, kitchen cabinetry, bathroom cabinetry and non-residential woodwork, with galleries for each. Estimates are advertised as free, the phone number given is (512) 731-7079, and hours are Monday to Friday, 8:00 am to 5:00 pm. The service-area line names Austin, Round Rock, Webberville, Georgetown, Leander, Cedar Park, Pflugerville, San Marcos, Buda and Red Rock. Worth noting: the site gives its address only as “Austin TX” and never states a street address, so it does not confirm the Elgin location this listing carries; nor do the pages read name any staff, certification, or how a job is priced beyond the free estimate. As described on bsquaredwoodworks.com, read 23 September 2026.

B & W Cabinets, which trades on its site as B&W Cabinets & Millwork, describes itself as a family owned and operated company that has been serving North Texas for over four decades with custom cabinetry and millwork, and says it has been family owned and operated since 1973. Its craftsmen are said to specialise in custom cabinet work for kitchens, bathrooms, closets, studies and more, and the range set out on the site covers pre-finished cabinets, site-finished cabinets, custom features and doors in flat panel and raised panel styles. The company says it serves a range of clients from custom home builders to remodel contractors, and states that it is built on Christian principles and on treating customers as it would want to be treated, with a team of salespeople, cabinetmakers and after-sales support staff. Its manufacturing facility is described as being in the mid-cities region of Dallas/Fort Worth, at 8200 Precinct Line Road, and the stated service area is builders and remodel contractors in the D/FW metroplex and surrounding counties including Wise, Hood, Erath, Denton, Collin, Ellis, Johnson and Rockwall. The firm sets out an eight-step process: a call or meeting to establish the requirement, a detailed estimate sent for review, drawings prepared by an in-house CAD specialist, a review meeting and any revisions along with colour selection for pre-finished work, scheduling into production with a stated lead time, installation by in-house crews, a final adjustment visit by an in-house service technician, and a paint touch-up where pre-finished cabinets were supplied. No opening hours are published. As described on bwcabinets.com, read 23 September 2026.

Bentwood, operated by The BentWood Companies, Inc, makes kitchen cabinetry and describes itself as a designer and producer of custom luxury kitchens. The company states that since 1989 its vision has been to create kitchens one at a time, and it refers to bringing customer visions to life for 35 years and to celebrating 35 years of being made in America. It says its cabinetry is distinguished by craftsmanship, a variety of textures, finishes and an exceptional warranty, and that every kitchen is a one-of-a-kind space built to the customer's exact specifications. The stated process runs from sourcing and design through production to final installation: a customer visits a showroom to meet designers for a consultation and to see the Bentwood collection, the design team then crafts a kitchen design based on the customer's values and lifestyle, and the kitchen is built to specification when it goes into production. The company reports three branded Bentwood showrooms, in Dallas, Houston and Chicago, and over 30 independent showrooms in 25 markets throughout North America, and it directs buyers to a showroom locator and dealer finder. It also invites enquiries from prospective authorised dealers. Its address is given as 2007 N. Lancaster-Hutchins Rd, Lancaster, Texas. Enquiries and pricing are handled through a showroom or dealer and an online enquiry form rather than published prices. As described on bentwoodkitchens.com, read 23 September 2026.

This entry rests on the company-wide Burrows Cabinets website rather than on any page about a Taylor, Texas plant: nothing in the pages read names Taylor at all, and the only address the site publishes is a headquarters at 1616 East Main St, Waxahachie, TX 75165, described alongside a "Dallas-Fort Worth Facility ... located 30 miles south of Dallas, Texas." The single phone number shown sitewide, 512-352-8600, carries the central Texas exchange long associated with the Taylor operation, and that is the one thread tying the listing's town to this site. What the corporate pages do say is that Burrows Cabinets, LLC is "a wholesale, builder-direct manufacturer of interior custom cabinets for new home construction in Texas," trading under the line "Texas Built. Home Builder Trusted. Since 1971." The About page says the company was "Founded in 1971 by James Burrows, Sr.," that "our story began with a small team, simple tools and local lumber," and that today "we manufacture every cabinet in our Texas facility using CNC precision and advanced finishing systems." It makes narrowness its central claim: "For over 50 years we've focused on one thing: building exceptional cabinets for new home builders," and "we remain laser-focused on one thing: cabinets," summed up as "Focus breeds mastery" and "excellence comes from focus, not fragmentation." It notes it is approaching its 55th anniversary. Work is "Not Imported. Never Outsourced. Always Made in Texas," with all cabinets and parts "manufactured in-house at our Texas facility by skilled woodworkers, many with decades of experience," and every cabinet "designed, manufactured, delivered, installed, and inspected by our local, experienced team." It serves "builders from Dallas/Fort Worth to Austin, San Antonio and all the communities in between" and works "exclusively with Texas home builders," stating plainly that it sells only to builders and directing homeowners back to their builder. Products span kitchens and islands, bathrooms, laundry and mud rooms, media and game rooms, offices, closets and bedroom built-ins, wet bars and vent hoods, with "hundreds of door style, material, stain and paint color, and EVRGRN engineered wood color combinations." As described on burrowscabinets.com, read 23 September 2026.

Smith Design and Manufacturing presents itself as a custom architectural millwork and metalwork shop rather than a timber or land-services business. The home page calls it “The Home for High-End Architectural Features” and groups its work into circular, spiral and straight stairs, glass, metal and wood balustrades, castings, doors and gates, lighting, cabinetry and wall treatments. The about page states that the firm “originally specialized in finely crafted wood stairs” and has “since branched out to include stairs with glass, metal, and stone,” and that its woodworking shop “boasts a five axis CNC” used to build its own compound curved handrails. It also describes “an expansive metals shop utilizing traditional blacksmithing techniques, as well as modern manufacturing and machining,” recently expanded to include a foundry. The services page offers CNC work “from simple projects up to a 5-axis router capable of producing complex Three Dimensional shapes,” along with stock and fully custom handrail profiles, though parts of that page are marked “(Under Construction)” and “(Description Coming Soon).” On history, the site says the business was “conceived nearly thirty years ago when cousins Lynn and Dee Smith opened their first custom stair shop just north of Dallas, TX” and now runs with “more than twenty highly skilled craftsmen” out of “a 30,000 square foot facility in Gunter, TX”; it gives no founding year. Work is said to be custom built to client specification and kept “in house” from construction through shipment and installation. The pages set out no pricing, no minimum order or project size, no staff credentials or trade certifications, and no quoting process beyond a contact form and an invitation to call and arrange a shop tour. As described on smithdesignmfg.com, read 23 September 2026.

Steves & Sons is a San Antonio door manufacturer whose website says it “has proudly served the millwork industry for over 160 years” and specialises in “manufacturing high-quality interior and exterior doors, which are available through distributors who supply lumberyards, retailers, and builders.” Its story pages date the business to 1866, when the Steves family “established a lumber business in San Antonio” at a time when the city “was just a small Mexican-style adobe village”; by 1879 Steves stocked “an average of three million board feet of lumber,” serving western Texas, northern Mexico and the frontier. A millwork plant was established in 1904 and the business was renamed Steves Sash & Door Company by 1912; in 1916 it was “the largest millwork operation in the southwest,” and it converted to aircraft propellers in the First World War and joinery for Liberty ships in the Second. The company says it produced more than one million doors between 1950 and 1970, opened plants in Lebanon, Tennessee (1971) and Richmond, Virginia (1983), started the Crest exterior door company in 1987, and in 2011 added pre-finishing capability at a new premium wood and fiberglass plant in San Antonio. Product lines listed include molded panel, Ultra MDF/HDF, wood panel, glass panel, flush and bifold interior doors, and Element steel plus Reliant, Regency and Legacy fiberglass exterior doors. The corporate office is at 203 Humble Ave., San Antonio, with further locations in San Antonio, Lebanon, Sandston (Virginia) and Brigham City, Utah. Six generations on, the family states a founding commitment to “conservative growth and environmental responsibility.” As described on stevesdoors.com, read 23 September 2026.

Sunshine Custom Cabinets presents itself as a Fort Worth custom cabinet shop serving homeowners, builders and contractors. Its about page states “Founded in 1984, SCC has grown from a small workshop to a renowned custom cabinet maker,” and the home page repeats the span, calling the firm “Fort Worth's Most Trusted Cabinetry Experts For Over 40 Years.” The home page sets out a four-step process — consultation, design, construction and installation — opening with “a detailed consultation to understand your needs, preferences, and vision for your space” and closing with fitting, and says cabinets are “tailored to fit your unique measurements and aesthetic preferences.” On staffing, the about page says only that “Our designer and builder, with over 40 years of experience, leads a team of skilled craftsmen” and that “Many of our team members have been with us for nearly two decades”; it names no one and lists no trade qualifications or certifications. Two of its claims are worth reading as the company’s own rather than as verified fact: that it offers “the lowest pricing in the industry, without compromising on quality,” and that it ensures “timely project completion without compromising on quality.” The same page names builders and contractors it works with, among them Fred Parker Company, Inc., Marshall Construction and Clearfork Construction, and says “Most of our business comes from repeat customers.” Three short customer testimonials appear on the home page. The site gives the Saunders Road address and a phone number but no price list, no lead times and no stated minimum job size; contact is by phone or a web form. As described on sunshinecustomcabinets.com, read 23 September 2026.

Sweeney Hardwoods describes itself as a wholesale distributor rather than a sawmill. Its about page states that it “Started in 1989 as part of the Sweeney Lumber family of companies” and is “a wholesale distributor of fine hardwoods, specialty pines, plywood, and composite panel products,” adding that “Our moulding and mill facility can produce custom pieces to meet your exact specifications.” The home page calls the firm “one of the largest hardwood lumber/plywood wholesale distributors in the Dallas/Fort Worth area” and “conveniently located near downtown Fort Worth.” Its stock program is described as “representing most North American species of lumber and plywood,” with Ash, Basswood, Beech, Birch, Cherry, Genuine Mahogany, Philippine Mahogany, Hard Maple, Soft Maple, Birdseye Maple, Red Oak, White Oak, quartersawn and rift sawn Red and White Oak, Pecan, Poplar and Walnut named, plus imported lumber and plywood. On milling, the page states the company “has the capability of running custom profile mouldings up to 11-3/4” wide!” and that “In house stock mouldings and cabinet parts are always available for your convenience.” The about page says the firm “is actively involved in industry trade associations” without naming any, and links to sister operations Sweeney Lumber and Resdoor; the footer reads “Copyright © 2010. R.E. Sweeney Company.” The contact page lists local, metro, toll-free and fax numbers, the Conway Street address, a credit application for those who qualify, and an inquiry form covering lumber, plywood, composite panels, S4S boards, mouldings and sculpted amenities. No certifications, staff credentials, minimum order quantity or pricing are stated anywhere on the pages read. As described on sweeneyhardwoods.com, read 23 September 2026.

Terrill Manufacturing Company (TMC) describes itself as "an architectural woodwork company that provides architectural woodwork and casework supporting k-12 educational schools, healthcare firms, banks, churches," as well as higher education institutions, restaurants, the lodging and resort industry, and the government. The site states the company was "Established in 1946 by Clarence Terrill" and that "today TMC is a minority controlled manufacturing company providing design solutions for customer satisfaction," summarising its record as a "Near 70-year history." It operates from "a 100,000+ sq. ft. manufacturing facility" and says that, headquartered in San Angelo and centrally located in Texas, it can service San Antonio, Dallas, Houston, Lubbock and the surrounding states. Listed services are project management, estimating (including "budgetary numbers , value engineering and design build assistance"), engineering shop drawings produced with computer software and transferred to programmed machines, manufacturing, shipping with "its own fleet of delivery vehicles," and installation by its own trained crews and dedicated subcontractors; many installers are described as "OSHA certified and have passed FBI background checks" and specialise in millwork, casework, solid surface, counter, countertop, panel, elevator interior and Division 10 products. Through its SEFA membership the company lists "Lab furniture & equipment, plastic laminate casework, pre-finished wood casework, architectural woodwork withturnkey installation." It reports AWI Quality Certification Program status, Minority Business Enterprise certification with the Southwest Minority Supplier Development Council and Texas Historically Underutilized Business certification with the Texas Comptroller, both announced 1 April 2014, membership of AWI since 1954, and memberships of SEFA, ASA and AIA. As described on terrillmfg.com, read 23 September 2026.

The Texian Shop describes itself as a complete millwork and custom furniture shop, opened in 1983 to provide architects, builders, designers and homeowners with architectural woodwork. The work it lists includes entry and interior doors, wainscoting, panelling, mantles and custom mouldings, and it says many woods are available, hand-selected for their natural colour and beauty. Past projects named on the site run beyond joinery to epoxy river tables, headboards, outdoor furniture, Adirondack chairs and farmhouse tables, alongside full sets of exterior and interior doors. The shop states that its doors are in homes in Austin and the Central Texas area and as far afield as Westchester County, New York. All work is carried out in the shop by the proprietor with the assistance of one co-worker, and the site says no part of the work is subcontracted out, which it gives as the reason for consistent quality. The site also records that in early 2019 the business was relocated from the Austin area to Conroe, while continuing to serve Central Texas, Bryan College Station and the Greater Houston area, so the Austin address held for this listing may no longer be where the work is done. Enquiries are made through a contact form on the site, which carries no telephone number. As described on texianshop.com, read 23 September 2026.

Trautschold Millwork Company, Inc. of 1500 Franklin Ave in Waco, Texas presents itself on a very small four-page website under a single banner line that runs across every page: "Trautschold Millwork. A Tradition of Quality Since 1893." The site carries only about 1,300 characters of text in total, and almost all of what the company says about itself sits on one short history page. There it explains that Trautschold Millwork "created custom millwork, windows, doors, mouldings, church furniture, and included a glass shop until the 1960's," and that "presently the company still specializes in custom architectural millwork, casework including wood and plastic laminate, custom doors and mouldings. We also do curved and radiused woodwork, and solid surface countertops." On the mix of work it takes, the company is equally brief and direct: "The company primarily does commercial work, but also does very high end residential work." A staff page names three people, Mike Sheedy, Bobby Dreyer and Lynne Bowerman, and then makes the shop's one real boast, which is about its workforce rather than its machinery: "With over 300 years of experience there is a wealth of knowledge to draw from. We have an employee that has been here 60 years and this has been his only job since he was 17 years old. We have a dedicated workforce and are proud of them." The contact page gives the Waco address and the shop's phone and fax, (254) 752-6547 and (254) 752-0221. Beyond that, the site is a set of navigation links only: Contact Us, Gallery, Staff, Job List, History and Home, with no text behind the gallery or job list that the crawl reached. The site states no certifications, no order minimum, no list of species or suppliers, no service-area radius and no named clients or projects. What it does state plainly is a founding date of 1893, a continuing specialty in custom architectural millwork and casework for mainly commercial customers, and unusual longevity among its employees. As described on trautscholdmillwork.com, read 23 September 2026.

The domain on file for Trinity Forest Industries, www.trinityforest.com, answers with pages belonging to Central Hardwoods of Dallas, and the single page read makes the connection explicit: the softwood lumber page states that “Through the acquisition of Fort Worth fixture Trinity Forest Industries, Central Hardwoods has become Dallas-Fort Worth’s premier source for Ponderosa Pine, Sugar Pine, and other fine softwoods.” What follows is a product listing rather than a company profile. It sets out the softwoods carried by species — aromatic cedar, Douglas fir, eastern white pine, ponderosa pine, radiata pine, sugar pine, western red cedar and yellow pine — with the number of grades stocked in each, and it explains the grade names it uses, from “No. 1 (Construction)” with “all sound, tight knots” through “No. 3 (Utility)” with “splits and knotholes present,” plus the C Select and D Select appearance grades used for interior trim and cabinetry. The contact details on the page are Central Hardwoods’ own, at 1959 West Northwest Highway, Dallas, and a Dallas telephone number, and the footer describes the business as “A Millwork Solutions Company.” A reader looking for this listing’s own operation will not find it here: the page says nothing about a continuing plant at the Hurst address, nothing about the architectural millwork and moulding the directory records for Trinity Forest, and it gives no founding year, no certifications, no named staff, no capacity figures and no minimum order. As described on centralhardwoods.com, read 23 September 2026.

Volume Millwork Mfg., LLC describes itself as a custom millwork and metal fabrication shop built around one market: "At Volume Millwork, we specialize in airport millwork - building ticket counters, gate podiums, custom casework, and metal fabrication for major airlines across the U.S." Its About page says the firm was "Founded in the late 1980s" and "has transformed from a small regional workshop into a nationwide leader in custom millwork solutions," claiming "over 30 years of experience" and "deep roots in the aviation industry." The stated vision is "to be the #1 partner for airport millwork nationwide - trusted for our precision, speed, and reliability," under the tagline "Precision, Proven, Coast to Coast." The company names the airports it works in - IAH in Houston, DFW, ORD, IAD, LAX and MIA - and lists its airport products as ticket counters and airline check-in desks, gate podiums, boarding counters, baggage service areas, customer service desks, and lounge and concession fixtures, all of it "ADA-compliant, durable, and designed to withstand the rigors of daily high-traffic use." Custom casework covers breakroom cabinets and lockers, workstations and service counters, security room fixtures and storage units, offered "in laminate, wood veneer, stone, and solid surface materials, all meticulously crafted to architectural specifications." A third line is architectural metal fabrication: the company says it combines woodwork and metalwork "under one roof," with in-house laser cutting and press brake forming for stainless steel trim and cladding, support structures and frames, kickplates, guards and rails. Its facility is described as having "advanced CNC machinery, precision laser-cutting systems, and a high-capacity press brake for stainless steel fabrication." Beyond aviation it lists hospitality and retail, healthcare, public infrastructure, government facilities and transportation hubs as sectors it is expanding into, and it courts general contractors and architects with accurate estimating and submittals, design/build and design/assist capability, nationwide shipping and logistics, and "ADA, fire code, and LEED-conscious designs." The only address the site gives is 4310 Directors Row, Houston, TX 77092, with hours of Monday-Friday, 7:30 AM to 2:30 PM and weekends closed; the pages make no mention of Spring or of any second location. As described on vmillwork.com, read 23 September 2026.

The Wood Gallery, Inc. describes itself as a manufacturer of fine hardwood plywood and architectural panels, working from Goodnight Lane in Dallas, Texas. The company says it was created in 1974 from a vision to produce custom wood furniture, and that it recognized a shortage of the select veneers and paneling needed for that work; over time the business evolved to fill that gap and is now devoted entirely to manufacturing wood panels and veneers for custom architectural designs and fine furniture. It reports steady growth over the past 50 years, a customer base of more than 350, and millions of square feet of paneling produced annually, with work ranging from office paneling to aircraft interiors to board room tables and clients across North America as well as Mexico, Puerto Rico, Canada, Japan, Antigua, Saudi Arabia, England, Italy, Brazil and Germany. The site lists over 200 types of veneer in house, in-house veneer production from beginning to end, runs from single panels to entire office buildings, press capacity up to 6.5 by 13.5 feet, a four-head 74-inch wide belt sander, thicknesses from 1/16 inch to 1.5 inch plus, and specialization in blueprint, sequencing, sketch face, geometric patterns, inlays, lightweight and aircraft panels. It states a showroom where architects, designers and contractors view 2-by-8-foot samples, and office hours Monday to Friday. As described on woodgallery.biz, read 23 September 2026.

Allied Truss Texas designs and manufactures wood roof and floor trusses and engineered wood products, named as LVL beams, glu-lams and I-joists, for commercial, residential and multi-family building projects. Its history page dates the business to Bullard, Texas in 1997 and calls it a family-owned truss manufacturer; it says the company expanded to Jacksonville, Texas in 2006, adding floor trusses to its range, opened a second plant in the Texas Triangle along the Trinity River in 2024, and was set to open a third facility in Houston in 2025. Multi-family work is described as covering apartments, student housing, townhomes and senior living facilities, and featured projects are listed at College Station, Austin, Georgetown, Dallas, Katy, Waxahachie, Conroe, Anna, Northlake, Houston, Bastrop and Lake Travis. Commercial and residential floor and roof trusses are made in the same way, each engineered to the individual project and, the company states, designed to meet the latest building codes and regulations. Design is done in house, and the sequence set out on the service pages is a quote first, then a design drawn by the in-house team, then delivery of the finished trusses. The company's stated commitments are fast estimates and competitive pricing, accurate and timely designs and submittals, professional and easy-to-read layouts and truss drawings, and truss packages and deliveries arranged to suit the job site and the framing crew, with the aim of being the most sought-after truss company in the southern United States. The team's combined experience in the truss industry is given as over six decades. Quotes are requested through the 'Get A Quote' form or by telephone, and the site also carries an areas-we-service page and technical information. As described on alliedtruss.com, read 23 September 2026.

The site reached for this listing, transactionpacking.com, belongs to the company the register names, and it presents a freight-handling operation rather than a conventional mill. The home page introduces the firm as "your single source for freight handling services including receiving, packing, crating, locating and shipping your cargo," and says it constructs "durable, dependable boxes with a fast turnaround, so your business is not hindered by delayed or damaged shipments." The navigation sets out the service lines as packing and crating, HazMat dangerous goods, container services, freight consolidation and warehousing, project cargo, and on-site mobile packing, which is consistent with the directory's classification of the business as a crate producer. On facilities, the page states that the company has sites "located north near George Bush Intercontinental Airport in north Houston and east near the Houston Ship Channel, as well as many locations throughout the Houston area," and that it is "ready to handle your project no matter the size," working "24 hours a day/7 days a week" with "no weight or size limitations." It offers to "visit your facility to give you a free quote," and says a single account manager is assigned to each project. One point a reader should note: the address on the site, 4120 Consulate Plaza Dr Ste 150, Houston TX 77032, differs from the 2928 Greens Rd. address carried in the register, while the telephone number matches. The pages carry no founding year, the only year on them being a 2026 copyright line, and they say nothing about certifications, buying timber, tract sizes, or the species and grades of lumber used. As described on transactionpacking.com, read 23 September 2026.

The crawl reached tridentcrating.com, a two-page site belonging to the company the register names. It presents Trident Crating & Services, Inc. as "a full-service international shipping company" and says that "with over 30 years of experience, business and residential clients rely on Trident Crating for expert packaging, crating, and shipping services." The pages never state a founding year, and a span of experience is not one, so no year is recorded here; the only year shown is a 2026 copyright line. The home page lists the work the company takes on as "third party logistics distribution and warehousing, skidding, hood boxing, military packing, vacuum packing, container loading, flat rack loading, and securing and shipping of any size container or project," which sits alongside the directory's classification of the business as a crate producer. It also says quotes are all-in, covering "pick-up, insurance coverage, packaging, crating, shipping, and delivery with one simple call," and that a free quote is available. The contact page places the operation "conveniently located near Houston's George Bush Intercontinental Airport and within 15 miles of the Port of Houston." A reader should note one discrepancy: the register files this business under Humble, while the site gives the same street address, 14320 Interdrive East, with a Houston, TX 77032 mailing city; the telephone number matches. Beyond that the site is thin. There is no about page, no staff listing, no certifications, no species or grades of lumber, and nothing at all about buying standing timber or about any minimum tract size. As described on tridentcrating.com, read 23 September 2026.

The website listed for Pallet Logistics of America, www.plofa.com, resolves to plasolutions.com, the national site of the pallet and logistics company that brands itself PLA. Everything read there is corporate and nationwide in scope. No page names Irving, gives a Texas address or telephone number, or spells out “Pallet Logistics of America” in full, so none of the detail below can be attached to the plant in this listing. The home page describes the company as how “manufacturers and retailers nationwide finally get their pallet and logistics problems under control,” and its menu sets out the service lines: national pallet programs; recycled, new and custom-sized pallets; pallet retrieval; pallet repair and return programs; custom crating; reusable packaging optimization; on-site services; reverse logistics; 3PL and warehousing services; and transportation solutions. It claims a network of “over 75 company-owned and operated facilities across the country” and coverage “from Florida to Alaska,” worked by a private fleet and a vetted partner network. The on-site services page states that PLA’s “trained staff can expertly execute a variety of pallet management and other warehouse services at your facility,” listing pallet sort, repair and return, freight handling and lumping, trailer processing and yard management, reusable packaging management and janitorial services, and claims “20+ Years of Experience” without naming a founding year. The 3PL page covers storage and inventory management, distribution and returns. The pages carry no certifications, no plant or yard detail, no published prices, and a locations map that did not resolve to any address in what was read. As described on plasolutions.com, read 23 September 2026.

Cougar Pallet Inc presents itself as a Houston manufacturer of pallets, crates and boxes that has been trading “Since 1976”. Its home page states that the company “has worked hard to be an industry leader in the pallet-manufacturing business in Houston, TX” and that “Every crate, box, and pallet is made by hand to your specifications.” Three services are set out. The pallet section says the firm takes “custom pallet orders in addition to our standard premade pallets” because “every business has different requirements”, and that its staff “will collaborate to design pallets that adhere to your needs.” A crate and box section describes the same custom approach, “whether you require a basic crate or a complex box.” A heat treatment section says the company treats wood so that “Pallets, crates, and other wood items are appropriate for export and import” by a technique “which complies with all international laws”; the footer of every page carries the line “ISPM-15 Certified.” The contact page says the company offers “free estimates and consultations” and invites enquiries by telephone or web form. The pages publish opening hours — Monday to Friday 7:00 am to 4:00 pm, Saturday 7:00 am to 3:00 pm — but no prices, no minimum order quantity and no lead times, and they say nothing about the company’s plant, its equipment, the number or qualifications of its staff, or where it buys its lumber. As described on cougarpallet.com, read 23 September 2026.

Ryan Wholesale states that "Since 1995" it has been manufacturing and selling structural timber trusses, fir timbers, corbels, rafter tails, pergola kits and other wood products including antique and reclaimed timbers, and describes itself as a supplier of timber frame trusses, mortise and tenon and gusset plate connected timber trusses, exposed heavy timber trusses, components for timber frame construction, and exposed timbers and beams "all across the USA," working with home builders, home owners and contractors on residential and commercial work. Its manufacturing plant is listed at 12110 US-183, Florence, TX. The home page says the company operates three 6-axis CNC timber processors with capacities up to 48" wide and 50' long, which allow it to work all faces without rotating the work piece; its mass timber page says it currently runs two CNC machines, one able to process CLT, GLT, GLB and Mass Ply up to 12" thick by 48" wide by 40' long, with a third processor "expected to arrive June 2025," and cites machining accuracy of 0.05mm. Listed capabilities include CNC timber and CLT processing, heavy timber trusses, "Engineering for all US states," mass timber and glulams, white oak and other species, custom millwork, custom brackets, a dry kiln, 3D CAD modeling, in-house steel fabrication (CNC plasma cutter, welding, bending), powder coating, and sandblasting and hewing. On raw material, it says 95% of the trusses and beams it produces are graded "#1 & better Free Of Heart Center (FOHC) Douglas Fir (South)," logged from coastal areas of the Pacific Northwest. As a cost illustration only, it prices a basic 6x8 timber truss with a 22' span and 6:12 pitch "in the neighborhood of $6,800.00 per truss," including consultation, shop drawings, connections, engineering where needed, assembly and delivery prep. As described on ryanwholesale.com, read 23 September 2026.

Fine Lumber & Plywood, Inc. trades from 9407 Brown Lane in Austin and calls itself the city's oldest full-service hardwood lumberyard. The site gives two different start dates: the banner on every page reads “Working Harder For Your Business Since 1982”, while the opening paragraph says “Since 1981, we have been serving our city's trade professionals”, so no founding year is recorded here. The customers named are trade professionals, custom cabinet shops, furniture makers and homeowners. Stock covers furniture-grade kiln-dried hardwoods and softwoods, hand selected from thousands of board feet, together with hardwood-veneered and specialty panels including cabinet-grade, composite and marine-grade sheets, sheet veneer, and cabinet hardware such as door hinges and drawer slides. The most commonly sought-after moulding profiles are held in stock in eight hardwood species, and the company says it manufactures new tooling every day to match and create custom profiles in any of its 30-plus hardwood and softwood species, doing template cutting, tool grinding and moulding from rough lumber on site. It also laminates solid hardwood up to 50 inches wide and 16 feet long for stair treads, tabletops, countertops and other wider-than-average items, supplied at final thickness and width, slightly oversized in length for a final crosscut and sanded to a 120 grit finish; for that work it asks customers to telephone with the details of their requirements and says it will quote straight away. Opening hours are given as Monday to Friday, 7.30 to 5.00. As described on finelumber.com, read 23 September 2026.

Austin Lumber Company trades as Austin Lumber and describes itself as family-owned since 1929. Its history page is written in the first person: the writer's grandparents moved to East Austin in 1925 and, with the writer's great-grandfather and great-uncles, started Austin Lumber Co in December 1929; the writer's father, Don Willhoite, the third generation, took over in the 1950s and ran the business until 1992, and died in December 2001. The fourth generation is shown working in the mill, and the business is described as 100 per cent WBE. The site records a fire on New Year's Eve 2005 as its darkest day, says Austin Lumber never missed a day after it, and describes rebuilding, with a 2008 rebuild focused on green building materials; in 2010 it worked on several HGTV shows, was featured in a CNN segment and was awarded City of Austin SMBR Small Business of the Year. After 88 years in an ever-changing East Austin, the site says the company was forced to relocate and close its mill and has since adapted to ecommerce commercial sales, specialising in commercial HUB networking. It lists certifications from TxDot, SBA and SAM.gov and holds HUB, SBE, DBE, WBE and SBA-EDWOSB status, and offers commercial clients copies of the certifications they need to meet HUB and WBE requirements for building materials; it has been a member of the National Association of Women in Construction since 1992. The business now works by appointment only and call-ins, giving a La Grange, Texas 78945 address, an office line on 512-476-5534 and a direct line on 512-848-5146. As described on austinlumber.com, read 23 September 2026.

England Products Company, Inc. supplies wood fiber for industrial, agricultural and consumer applications from Dallas, Texas. The company states it has been providing a diverse range of wood fiber since 1980 and describes more than four decades of offering an extensive selection of wood fiber choices intended to meet the quality and consistency its customers require, with references to sustainability and to customer service and satisfaction. It says it offers a selection of fiber types and consistencies to meet specific fiber requirements sought by manufacturers, agricultural sectors and consumers. Examples it gives of end uses for its wood fiber are fuel for industry, fuel for homes, chemical waste disposal, engineered wood products, roofing and felt paper, playground medium, cattle and swine bedding, and poultry bedding. The company also provides its own transportation, stating that it maintains a fleet of late model, well maintained trucks operated by trained drivers in order to make prompt and dependable deliveries. It gives its address as 1200 N Walton Walker Blvd, Dallas, Texas, and directs customers to telephone or send an enquiry to request more information or to schedule a delivery; a contact form is provided on the site. No operating hours, pricing or certifications are stated on the pages reviewed. As described on englandproducts.com, read 23 September 2026.

Halbert Mill Company’s site is built almost entirely as a product menu, and the trade it points to is packaging for the brick and stone industry rather than the container manufacturing the state directory records. The home page titles itself “Brick, Stone & Industrial Packaging” and groups what it sells under headings: “Industry Best Brick Packaging” covering veneer, plastic, brick paper, brick edge protection and thin brick, with and without pallets; “Quality Stone Packaging” covering pallet half surrounds and plastic cartons; “Economic, Compelling Displays” covering frames, standing displays and display panels; and “Special Purpose Industrial Papers” covering pallet liners, top protectors, interleavers, industrial rolls and poly-coated paper. A further heading, “Money Saving Custom Converting,” lists die cutting, rewinding, slitting, perfing, sheeting and stitching, and an industrial packaging group lists corners, industrial rolls, strapping and tools, and stretch wrap. The contact page gives the address as 3939 FM 347 North, Jacksonville, Texas 75766 — the same address carried in this listing — along with GPS coordinates and the telephone number 903-683-2788, a local line rather than the toll-free number on file. Beyond that, the pages read are silent on almost everything a buyer would ask about: there is no company history or founding year, no description of the mill or its equipment, no certifications, no named staff, no capacity or lead times, no minimum order and no prices, only an enquiry form and a “Bargains & Sales” link. As described on halbertmill.com, read 23 September 2026.

mgsawmill.com is a single-page site for the business the register names, giving the address as 149 High Oak, Huntsville, Texas 77340 and a telephone number that matches the register. Its about section states that "M&G Sawmill was started in 2002 by Michael(Son) and Glen Carnline(Father)," with the aim "to provide quality rough cut lumber at a fair and reasonable price," and claims the business has become "one of the largest (if not the largest) purveyors of fire place mantels and bartops in Texas." The lumber section says the mill works in "Texas native hardwood and softwood lumber" and that "all wood is milled and then dried in a commercial size kiln here at the sawmill." Priced items shown include red and white oak, black walnut, aromatic cedar, pecan and hickory, mesquite and rustic oak flooring, tongue-and-groove and shiplap cedar, log cabin siding in pine and cedar, cedar posts in several diameters and lengths, fireplace mantels, slabs and bar tops, firewood and smoking chips. Two limits on the page are commercial terms rather than land policy: prices "reflect a 50bf minimum purchase," and firewood carries a "Minimum purchase - full basket (approx. 1/2 cord)." Neither is a tract size, and the site states no minimum acreage anywhere. The mill is explicit that it does not saw wood brought in by the public: "We WILL NOT accept an individuals timber or lumber for cutting." Payment is "Check or Cash ONLY!" with no cards taken, and hours run Tuesday to Friday with the yard closed Saturday through Monday. The site lists no certifications and says nothing about buying standing timber. As described on mgsawmill.com, read 23 September 2026.

General Packaging Corporation, which trades online as GPC Texas, says it opened for business in 1957 in Texas and describes itself as a manufacturer of packaging products and integrated packaging solutions. The company states that it makes corrugated packaging, including corrugated boxes, custom corrugated boxes and heavy-duty boxes; wood products such as new construction pallets, skids and crates produced at dedicated wood plants; export packaging; and custom foam cushioning inserts and assemblies in various densities and materials. It also lists engineered solutions, military or Mil Spec packaging, industrial crates for military packaging, and engineering and design work carried out by in-house packaging engineers. The site says the firm is family-owned and operated, ships to hundreds of customers each month, serves industries ranging from automotive and defense to heavy industry and oil and gas, and ships across the United States and internationally. It reports four production plants in Texas at Richardson, Dallas, Conroe and Garland, corporate offices in Richardson, more than 200,000 square feet of combined manufacturing space, over 900 unique parts shipped per month, and an ISTA-certified testing lab. On sustainability it describes recycling corrugated trim, wood shorts and end trim, and foam scrap. Quoting begins with a request-a-quote form or a phone call, typically an in-person consultation and a prototype before production, and the site says it will quote competitively from existing drawings. As described on gpctexas.com, read 23 September 2026.

The address held for Noltex Truss, noltextruss.com, resolved to the corporate site of Builders FirstSource at bldr.com, and the pages read for this listing are Builders FirstSource's own national pages rather than anything written about the Big Spring operation. Those pages describe Builders FirstSource as a supplier of structural building products, value-added components and services to the professional market for single-family and multi-family construction and for repair and remodelling, working from approximately 565 distribution and manufacturing locations across 43 states with some 28,000 team members, and give its contact address as 6031 Connection Drive, Suite 400, Irving, Texas. The products listed include trusses, manufactured components, lumber, moulding and millwork, plywood and sheathings, and its READY-FRAME pre-cut framing packages, while the services listed include truss and engineered wood product design, drafting, custom millwork, delivery and pick-up, installed services, modular construction and a customer portal. The site states that services vary by location and asks customers to contact their local store for availability, and quotes are requested through a Get a Quote form. The corporate pages read for this listing do not name the Big Spring plant, and say nothing of its history, hours, capacity or the species it works in, so nothing here should be read as Noltex Truss's own account of this particular operation. As described on bldr.com, read 23 September 2026.

Pallet Logistics of America, which trades as PLA, presents itself as a nationwide pallet and supply chain services company serving manufacturers and retailers rather than as a stand-alone Dallas business; the Dallas address appears as one of its locations, and the site directs enquiries through a single national organisation. The company says it supplies recycled, new and custom-sized pallets and runs national pallet programs, pallet retrieval, pallet repair and return programs, and custom crating. Its supply chain services are described as reusable packaging optimisation, on-site services, reverse logistics, third-party logistics and warehousing, and transportation and logistics management. For on-site work it states that it places trained staff and equipment at a customer's facility for as many hours and days per week as required, covering reusable packaging management, freight handling and lumping, pallet sort, repair and return, trailer processing and yard management, and janitorial services, and says it has been providing such customised on-site services to large retailers for more than 20 years. Its warehousing offering covers storage and inventory management, distribution and returns, and reporting. The company says it draws on a network of more than 75 company-owned and operated facilities across the country plus a managed partner network, operates its own private fleet, and provides service from Florida to Alaska. It also publishes recycled pallet market analyses and an ESG report and environmental product declaration. Enquiries are handled by requesting a quote or a proposal through the site's forms or by contacting its sales team. As described on plasolutions.com, read 23 September 2026.

The web address on file for this business resolves to plasolutions.com, the nationwide corporate site of PLA, and the crawled pages describe the company as a whole rather than the San Antonio operation; no page names San Antonio or Texas, and the site's locations are shown only through an interactive map that invites visitors to "Click on a highlighted state or use the dropdown below to see available locations." PLA describes itself as "how manufacturers and retailers nationwide finally get their pallet and logistics problems under control," opening with the line "The best pallets are the ones you never have to think about." Its listed pallet offerings are national programs; recycled, new and custom-sized pallets; pallet retrieval; pallet repair and return programs; and custom crating, alongside supply chain services covering reusable packaging optimization, on-site services, reverse logistics, 3PL and warehousing services, and transportation solutions. The company says it draws on a "network of over 75 company-owned and operated facilities across the country" plus a vetted partner network, runs a private fleet, and offers "service capabilities spanning from Florida to Alaska." On-site work is said to include reusable packaging management, freight handling and lumping, pallet sort, repair and return, trailer processing and yard management, and janitorial services, with "20+ Years of Experience" providing such services "to the largest retailers in the country." The 3PL side covers storage and inventory management, distribution and returns, demand forecasting, and reporting. The site also publishes a 2025 ESG Report, an Environmental Product Declaration, and recurring "Recycled Pallet Market Trends" analyses. As described on plasolutions.com, read 23 September 2026.

Conner Industries describes itself as “a leading provider of industrial wood and packaging solutions” headquartered in Fort Worth, Texas. The boilerplate repeated across its pages says the company specialises in “supplying cut lumber (softwoods, hardwoods, and panel products) needed for pallets, crates, and skid parts, fully assembled custom pallets, crates, integrated packaging solutions, and a wide variety of services tailored to customer needs,” serving “customers nationwide from our 19 plant locations” with “educated and knowledgeable sales people, subject matter experts, an experienced design team, and multiple packaging engineers on staff.” The home page claims “nearly 40 years of experience in industrial packaging, and multiple locations nationwide with backup capabilities,” offers pallets and crates “made with either southern yellow pine or hardwood,” and lists service work including 3PL, vendor-managed inventory, kitting, assembly and co-locating. Product sections cover industrial wood, pallets, crates, integrated packaging and foam packaging, and the industries page ranges from oil and gas to aerospace, pharmaceuticals and heavy equipment. The leadership page says CEO David Dixon joined in 2017 and led the company’s transformation “into a diversified, integrated packaging platform operating 18 manufacturing locations across 14 states with revenues approximating $200 million.” A quality policy is set out in general management terms; no third-party certification is named, and the associations page states the company is “an active and supporting member of the associations below” without naming any in the page text. Quotes are requested through a form or by calling 1-800-413-8006. Note that the contact page gives corporate headquarters at 3800 Sandshell Drive, Suite 235, and its plant list includes Haslet, Conroe and Garland in Texas but no plant at the Keller-Hicks Road address this listing carries. As described on connerindustries.com, read 23 September 2026.

The pages returned for this listing are Conner Industries' corporate pages, and they do not describe the Conroe plant itself: Conroe, TX (N. Houston) appears only in the company's navigation list of locations and in its list of plant locations, with no address, telephone number, staffing, capacity or operating detail for that site. Conner Industries describes itself as a provider of industrial wood and packaging solutions, supplying cut lumber in softwoods, hardwoods and panel products for pallets, crates and skid parts, together with fully assembled custom pallets and crates, integrated packaging solutions and a range of services tailored to customer needs. Its product pages cover industrial wood, pallets, crates, integrated packaging and foam packaging, and mention mill-direct shipments, hardwoods, banding groove, wholesale pallet lumber and export-compliant lumber, with pallets and crates made in either southern yellow pine or hardwood. The service solutions named are third-party logistics, vendor-managed inventory, kitting, assembly and co-locating. The company says it serves customers nationwide from 19 plant locations, is headquartered in Fort Worth, Texas, and has nearly 40 years of experience in industrial packaging, with account managers, subject matter experts, a design team and packaging engineers on staff. The industries listed are energy, oil and gas; automotive; aerospace and defence contractors; chemicals, plastics and film; pharmaceuticals, food and beverage and consumer goods; HVAC and appliances; heavy industrial, pipe, steel and heavy equipment; agriculture, lawn and garden; and logistics and transportation. Guardian Packaging is named as a division of the company. Quotations are invited centrally through a request-a-quote form or the freephone number carried on every page, and no opening hours are published. As described on connerindustries.com, read 23 September 2026.

The pages read for this listing are the corporate site of Conner Industries Inc., which gives its headquarters as 3800 Sandshell Drive, Suite 235, Fort Worth, Texas. The company describes itself as a provider of industrial wood and packaging solutions, supplying cut lumber - softwoods, hardwoods and panel products - for pallets, crates and skid parts, along with fully assembled custom pallets, crates, integrated packaging and foam packaging. Its industrial wood offer covers mill direct shipments, hardwoods, banding groove, wholesale pallet lumber and export-compliant lumber; pallets and crates are made in either southern yellow pine or hardwood; and its service solutions include 3PL, vendor-managed inventory, kitting, assembly and co-locating. It says it has nearly 40 years of experience in industrial packaging, that it has account managers, subject matter experts, a design team and packaging engineers on staff, and that it serves customers nationwide from 19 plant locations. The industries it names run from energy, oil and gas, automotive and aerospace and defence contractors through chemicals, plastics and film, pharmaceuticals, food and beverage and consumer goods, HVAC and appliances, heavy industrial, pipe, steel and heavy equipment, agriculture, lawn and garden, to logistics and transportation. Quotes are requested online or by telephone on 1-800-413-8006 or 817-847-0361. The plant list published on the site names Haslet, Conroe and Garland in Texas but no Alamo site, and the corporate pages read for this listing do not name the Alamo operation at all, so nothing here should be read as that plant's own account of itself. As described on connerindustries.com, read 23 September 2026.

Conner Industries describes itself as “a leading provider of industrial wood and packaging solutions,” specialising in “cut lumber (softwoods, hardwoods, and panel products) needed for pallets, crates, and skid parts, fully assembled custom pallets, crates, integrated packaging solutions, and a wide variety of services tailored to customer needs.” It says it serves customers nationwide “from our 19 plant locations” and that it is “headquartered in Fort Worth, Texas,” at 3800 Sandshell Drive, Suite 235. On the Houston area the site is thin: its plant-location lists name “Conroe, TX (N Houston)” and “Haslet, TX (Dallas/Fort Worth),” and no Houston street address, plant page, local phone number or local manager appears on any page read here, so nothing on the site describes what is done at the Houston address itself. What the pages do describe is company-wide: product lines of industrial wood, pallets, crates, integrated packaging and foam packaging; services said to “help our wood customers optimize supply chains and lower the total cost of packaging, including 3PL, VMI, kitting, assembly, co-locating, and more”; and industries served ranging from energy, oil and gas to automotive, aerospace, pharmaceuticals and heavy industrial. The company says it has “nearly 40 years of experience in industrial packaging” and keeps “an experienced design team, and multiple packaging engineers on staff,” and its leadership page names a chief executive, David Dixon, who joined in 2017. A quality policy is published, and an associations page says the firm is “an active and supporting member” of industry associations, but the associations themselves are shown only as images and are not named in the text; no founding year, certification, minimum order or published pricing appears, and quoting is by a “Request a Quote” form or the toll-free number. As described on connerindustries.com, read 23 September 2026.

Resdoor Company, Inc. describes itself as a Fort Worth supplier of doors and interior woodwork that runs its own mill. Its About Us page states that “Resdoor has been supplying the North Texas area with handcrafted doors and interior woodwork since 1970” and that “With our own custom mill, we can work together to have your millwork complete to finish your project on time.” The same page sets out “a complete line of residential, multifamily and commercial door products and millwork,” listing oak and paint grade stairway systems, exterior and interior doors, door units and hardware, custom manufactured mouldings and mantels, custom designed windows and entryways, steel door units and frames, and specialty products. The home page adds mouldings such as “chair rails, quarter rounds, cap and panel moulds, crowns and bases,” alongside entryways, wood entry doors, fiberglass doors, interior doors and rediframes, and says the firm offers “many brands of quality millwork, doors and moulding,” pointing to a resources page for the names. The company presents itself as part of a group: the About Us page directs readers to “Sweeney Lumber and Sweeney Hardwoods to learn how the R. E. Sweeney family of companies can further assist you,” and the footer reads “Copyright © 2010. R.E. Sweeney Company.” The contact page gives the Noble Avenue address, local, metro, toll-free and fax numbers, and a credit application “for purchases to those who qualify.” The site states no certifications, no staff credentials, no lead times and no minimum order; it says only that “a knowledgeable salesperson will assist you,” so quoting appears to run by phone. As described on resdoor.com, read 23 September 2026.

Lankford's Mesquite Products appears online as Lankford's Mesquite Gallery, the workshop of Terry Lankford in Abilene, Texas, which makes custom mesquite furniture, lamps and fireplace mantels. The site is organised around beds, mantels, tables and mesquite lumber, with gourd art by Susan Lankford shown alongside. It describes Texas mesquite as a wood known for its rich auburn colour, highly figured grain and character patterns that age to a distinctive patina. By the site's account Terry Lankford graduated from Abilene Christian University in 1975 with a degree in Industrial Technology, and his background is in woodworking along with ten years in the limestone quarry and fabricating business; he names the building of the Marty Leonard Chapel at the Lena Pope Children's Home in Fort Worth as his greatest woodworking accomplishment. He began working full time with mesquite in 2001, and the site says that since 2001 the shop has continued to make custom mesquite furniture. Most designs are custom ordered: Terry or Susan will discuss the idea, and once design, timeline and budget are agreed a 30 per cent deposit is required before work begins, with the balance paid before delivery or shipment. Lead times vary with the size of the piece, the intricacy of the design and the work already scheduled, and the site notes it is not uncommon for the shop to be booked six to eight months out for large pieces. The showroom is next to the shop at the Lankfords' home, and the site asks visitors to telephone ahead on 325-660-5223. Terry is a member of the Abilene Chamber of Commerce, the Abilene Better Business Bureau and the Texas Mesquite Association. As described on mesquitegallery.com, read 23 September 2026.

Brazos Forest Products presents itself as a distributor and millwork manufacturer rather than a mill that buys standing timber. Its home page states the company is “the premier distributor of quality hardwood, plywood, and custom moulding in Texas and Louisiana,” working from Austin, Grand Prairie (listed as Dallas/Ft. Worth) and Houston in Texas and a fourth location in Denham Springs, Louisiana; the Grand Prairie branch is given as 2760 N Great SW Pkwy on (800) 772-2777. The About page sets out the services: “Brazos Forest Products offers in house milling at all locations to meet your specifications,” with “Newman planers provide a ready to sand finish and straight line ripping.” Grand Prairie is singled out twice — “Net Rip services are offered at Austin and Grand Prairie along with custom moulding manufacturing,” and “Grand Prairie offers parallel edged random width lumber using a state-of-the-art saw with moveable blades. Each board is scanned by lasers and blades adjust to make the perfect cuts to provide you with the highest yield possible.” Customers may “call in for pick up, order at the counter, or schedule for delivery on one of our curtain side trucks.” The product menu runs to domestic and imported hardwood lumber, sheet goods, mouldings, flooring, hardware and tool lines including Festool and Kreg. On experience the company claims only that “many of our team members have 30 plus years experience in the hardwood industry.” The pages read give no founding year, name no certification or grading body, and say nothing about buying timber, minimum volumes or how custom work is priced beyond an invitation to “let us quote your next job today.” As described on brazosfp.com, read 23 September 2026.

Brazos Forest Products presents itself as a distributor rather than a sawmill, calling itself “the premier distributor of quality hardwood, plywood, and custom moulding in Texas and Louisiana.” The site lists four branches — Austin, Grand Prairie, Houston and Denham Springs, Louisiana — and gives the Houston location as 6911 Fairbanks N. Houston Rd., Suite 110, Houston, TX 77040, with a toll-free line of (888) 343-0667 and a fax of (713) 329-5871. The about page states that the company “offers in house milling at all locations to meet your specifications,” with Newman planers that “provide a ready to sand finish” and straight line ripping. Where the site is more specific it places certain capabilities elsewhere: “Net Rip services are offered at Austin and Grand Prairie along with custom moulding manufacturing,” and “Both locations can service Houston and Denham Springs, LA for custom moulding.” The laser-scanned, moveable-blade saw used for parallel-edged random width lumber is attributed to Grand Prairie, not to Houston. Product pages cover domestic and imported hardwood lumber, sheet goods and plywood, mouldings and custom profiles, live edge slabs and mantels, flooring, hardware, and Festool and Kreg tooling. On ordering, the site says each location supports call-in pickup, counter orders, or scheduled delivery “on one of our curtain side trucks.” It notes that many team members have “30 plus years experience in the hardwood industry,” but the pages read here give no founding year, no named staff or credentials for the Houston branch, no certifications, and no minimum order or tract size; quotes are obtained by contacting a local Brazos sales representative rather than from any published price list. As described on brazosfp.com, read 23 September 2026.

A-1 Lumber & Pallet presents itself as a family-owned Houston crate and pallet maker geared to export freight, describing itself in the footer as “Family-owned • ISPM-15 Certified • Shipping Worldwide” and saying it has been “proudly serving global logistics from Houston, Texas, shipping crates & pallets to 6 continents since 1973.” The services listed are custom crating, “hand-built crates sized by seasoned craftsmen with decades of intuition, with CAD drawings available only when you need them”; custom pallets, described as “heat-treated stringer, block, and runner pallets: one-off prototypes or high-volume runs, delivered just-in-time”; cut-to-size lumber, covering “industrial hardwood, yellow-pine timbers, and dunnage cut to exact dimensions for in-house fixtures or heavy freight”; and ISPM-15 heat treating, offered as “in-house kiln stamping for full export compliance: no pests, no customs delays, complete traceability on every load.” The site sets out a three-step process: customers send “rough dims, weight, or a quick phone sketch” and are quoted within 24 hours with “no CAD required”; carpenters then “cut, nail, and brace each crate, kiln-treat to ISPM-15, stamp for export, then double-check every joint”; and goods are collected in Houston or delivered by next-day truckload or LTL. It says the “20,000 sq ft facility is minutes from I-45, enabling same-day pick-ups and on-time freight departures to Port Houston,” gives the address as 16701 Mathis Church Rd, Houston, and lists hours of Monday to Friday, 7:00 AM to 3:00 PM CT. Beyond the ISPM-15 claim the pages name no certifying body or registration number, publish no prices or minimum order, and give no lead times other than the 24-hour quote promise. As described on a1lumberpallet.com, read 23 September 2026.

The website recorded for this listing, norbord.com, no longer serves a Norbord site; the crawl that followed it landed on westfraser.com, the corporate site of West Fraser Timber Co. The pages read are company-wide material and say nothing at all about the Jefferson, Texas mill in this record. The history page explains the connection between the two names: “West Fraser went global in 2021 when it acquired Norbord—the world’s largest OSB producer—and gained a footprint with 14 OSB mills, an MDF mill, and two particle board mills located in the U.K. and Europe.” It adds that Norbord “had a well-earned reputation for cost and margin performance, and for expanding the use of OSB in new applications and industries,” and that the deal made West Fraser “a top global producer of both lumber and OSB.” The company describes itself as “one of the world’s largest producers of renewable wood building products, with more than 50 facilities in Canada, the United States, the United Kingdom and Europe,” and says it is “committed to responsible product sourcing and harvesting practices, backed by globally recognized forest certifications” — though the pages read name no certification scheme. Its earlier move into the U.S. South is described as “acquiring 13 mills located in North Carolina, South Carolina, Georgia, Florida, Alabama, Arkansas and Texas” in 2007. The company trades on the Toronto and New York exchanges under WFG, and its values page sets out safety, integrity, frugality, competitiveness, fun, teamwork, humility and trust, stating that “all accidents are preventable.” None of this reaches the Jefferson operation: the pages give no local address, phone, capacity, employment, log purchasing terms or minimum tract size, and a landowner would learn nothing here about selling timber to this mill. As described on westfraser.com, read 23 September 2026.

Building Products Plus describes itself as a supplier and manufacturer of treated wood and “extended-life building materials,” its home page titled “Treated Lumber, Timbers, Poles, Pilings in Houston and Galveston Region.” It says it supplies “extended-life structural building materials worldwide” and calls itself “the Gulf Coast leader in marine and shoreline treated wood and extended life building materials.” Product pages cover poles, pilings and posts, treated timbers and lumber, vinyl sheet piling, polymer-coated wood, engineered lumber (LVL, PSL, LSL and truss joists), decking, and hardware. On treatment it states that “Southern Yellow Pine Timbers can be pressure treated for use in ground or fresh water (.60 pcf or .80 pcf) and saltwater (2.5 pcf)” and that “CCA and ACQ treatments are available.” It stocks “Southern Yellow Pine #2 and better” and also supplies “fir, cedar, redwood, and other hardwood timbers.” The manufacturing side is custom: the firm says it will build timber trusses of “Any size, any length, any design,” has “built impressive trusses covering spans as long as 70 feet,” produces corbels up to 17 inches wide, and will pre-cut, drill and mill parts to ease a customer’s on-site workload. It sets out a turn-key sequence of design, engineering, production/fabrication, delivery and installation, and cites rebuilding the fire-damaged Pier 29 Boat Shed in San Francisco, where “15 massive timber trusses were needed,” as an example. Its Lock-Deck decking line is said to be “Manufactured per ANSI/AITC 190.1 and certified by an independent inspection agency” — a product standard rather than a company credential — and the numerous “Minimum” figures on that page are panel length-mix percentages, not order or site minimums. The pages read here name no founding year, no company certifications and no staff credentials, and publish no prices; work is quoted by calling the firm’s “Experienced Project Consultants” or submitting a project form. As described on buildingproductsplus.com, read 23 September 2026.

Central Hardwoods is a wholesale distributor of hardwoods, softwoods and building materials in Dallas, Texas, selling to the public as well as to trade. The company states it was established in 1946 and works with architects, builders and cabinet shops on commercial and residential projects throughout North Texas. It describes itself as one of the largest wholesale distributors of lumber and building materials in North Texas, having expanded from the original 25 species to over 70, including veneers, plywoods and panel products such as Homasote and Medex. Stock is described as hardwoods in #1 Common or Better, 4/4 to 16/4, plain, quarter and rift sawn, and softwoods in multiple grades from 4/4 to 12/4, with the company calling itself a Ponderosa and sugar pine specialist; engineered wood offerings include veneers, plywoods and fire rated MDF. Milling services listed are custom moulding and trim produced from a sample, CAD file or drawing, straight-line and gang ripping, surfacing and sanding through industrial planers and wide belt sanders, edge gluing for butcher block, countertops and tabletops, radius moulding, and stair treads. Ready-made moulding profiles are carried in stock for immediate pickup and a searchable custom moulding catalogue is published online. The company says it joined the Millwork Solutions Family of Companies in 2009 and moved to a larger facility in 2013. Hours are Monday through Friday, 7:30 am to 4:30 pm, and enquiries are taken by telephone or an online contact form. As described on centralhardwoods.com, read 23 September 2026.

Haynes Cedar Company is a "family owned and run business" operated by Bill and Janet Haynes, with a cedar yard at 1904 W. U.S. Highway 290, about 1.5 miles west of Johnson City, Texas, on the highway heading toward Fredericksburg (the site warns visitors not to rely on GPS for that address). The company specializes in Texas Mountain Cedar, "also known as Mountain Juniper or Juniper Ash," and states that its cedar is cut within plus or minus 60 miles of Johnson City and that "None of it is cut east of IH35." Products include mountain cedar fence posts and cedar stays, cedar posts for entrances, smaller posts for building "Coyote" or privacy fences in 5' to 8' lengths (6' to 8' available in limited quantities), unique wood pieces for artists, and a selection of large milling logs for which an appointment is recommended; the company says it no longer peels posts but offers porch posts that a customer or contractor can strip with a power washer. It also does land clearing and invites landowners to call about "brush clearing and cedar control needs," and addresses artists, builders, homeowners and interior decorators for special orders. The cedar yard is open by scheduled appointment only, with most customer pick-ups scheduled for Wednesdays and appointments requested at least one day ahead; the business is reachable Monday to Friday by phone, text or email, is closed Saturday and Sunday, accepts cash or checks only with no credit cards, and notes it is weather dependent because a wet yard cannot be entered. Its stated promise is "Quality Product for a Fair Price!" As described on haynescedarcompany.com, read 23 September 2026.

Berdoll Sawmill is a family owned and operated sawmill at Cedar Creek, east of Austin in Bastrop County, Texas, established in 2009 by Brandon and Brandi Berdoll, who say the business is built on Christian values. The firm saws native Texas hardwood logs that it states are sustainably sourced within a 100-mile radius of the mill, and sells kiln dried live edge slabs, furniture grade lumber and mantels in species such as pecan, mesquite, black walnut and longleaf pine, together with end grain disks, flooring, ceiling and wall material, whole log lumber packs and custom projects. It says it has complete on-site control over every step of production, drying all wood in onsite computer-controlled kilns, then surfacing slabs flat before planing them to a consistent thickness ready for hand sanding at 120 grit, and it guarantees its products to be dry, flat and free of wood-boring insects. A fully equipped woodshop also takes in outside work, offering jointing, planing, wide belt sanding, straight line ripping, resawing, large dimensional crosscuts, flattening of lumber and slabs, and custom flooring, wall and ceiling material and mouldings, on machinery listed as an 18-inch Tannewitz table saw, 30-inch Porter jointer, 36-inch Whitney planer, 32-inch Northfield bandsaw and 36-inch wide belt sander. Inventory is displayed in a 4,500 square foot humidity-controlled showroom, open Monday to Friday from 8:00 am to 5:00 pm, and the company ships nationwide and says it will work with orders from one board to 10,000 board feet. Enquiries go by telephone or through a form on the site, which a team member answers. As described on berdollsawmill.com, read 23 September 2026.

Acme Skid presents itself as a division of Apache Products, Inc., a family-owned wooden skid and pallet maker on John Hare Road in Silsbee, Texas, whose line of work it sums up as "Wooden Skids, Pallets & Other Specialty Lumber Items." The company says it "maintains a full-scale, state-of-the-art manufacturing and production facility," listing Computer Pallet Design Software, Computerized Viking 505 Nailing Machines, a Hand Nail Department for Specialty Items and Baker Re-saws, and adds that it runs "a TQM program that interfaces with customers' ISO9000 requirements." Sales are pitched as consultative: "Acme Skid has a knowledgeable sales force ready to call on your company. We can custom-design pallets to meet your specific needs, and we follow our manufacturing with superior customer service." Heat treatment gets its own page, described as "A Necessity In Today's World Of Imports" - all pallets produced in the facility are heat treated in a Brunner Hildebrand heat chamber that the company says has been certified by Timber Products Inspection Inc., reaching "the Internationally required temperature of 60 degrees Celsius (140F) for 45 minutes," after which items can be stamped with the company's licensed mark for compliance with the International Plant Protection Treaty. The site also describes a Vendor Managed Pallet Inventory Control System, carrying "7-10 days of finished goods in inventory" and "upwards of 45 days of pre-cut, Cants and dimensional lumber in stock," bought from "a diverse set of lumber providers throughout the Southeastern part of the US - Mills and Brokers," with imported lumber purchased when necessary. Scale figures repeated across the pages: over 90 employees, more than 7,000 pallets a day and almost 2,000,000 a year from 50,000,000 board feet of lumber annually, a fifth pallet assembly line added in 2015, and 9 trucks and 14 trailers moving 67 loads of pallets a week. Service area is given as Baton Rouge, Louisiana to Freeport, Texas, naming Beaumont, Houston, Victoria and Dallas. A history timeline runs from 1956, when "Apache Products DBA Acme Skid begins operations," through the 2006 purchase by LaNita and Brook Gilchriest, the 2011 purchase of M&T Pallet, Honey Island Sawmill construction in 2014 and a 60th anniversary in 2016. The company states it is WBENC-certified as a Women's Business Enterprise, an Equal Opportunity Employer, and a member of the National Wooden Pallet & Container Association, the National Safety Council and the Texas Forestry Association, having "participated in the OSHCON program since 1991." As described on acmeskid.com, read 23 September 2026.

The website reached for this record is that of Anchor Bay Packaging Corporation, which lists a Cibolo Division at 1204 Schneider Dr., Cibolo, Texas among its locations, alongside Texas divisions in Cleburne, Houston, San Benito and Belton, plants in New Baltimore, Michigan, and sites across Mexico. The company describes itself as an international industrial packaging provider offering design, engineering, manufacturing, logistics, program management and customer support, and says it specialises in the manufacture and sale of corrugated packaging products, primarily for the automotive industry, in the global market. Its stated product range covers expendable packaging for domestic and overseas shipments, returnable packaging, and P2 collapsible reusable partitioning, built from corrugated, wood, chipboard, plastic, foam or a combination of these materials; it also reports designing UN certified wood crates from 2018 and UN certified expendable packaging from 2021. The industries named are automotive, electric vehicle, food and beverage, consumer goods and specialty items. The site says the company works to ISO and ISTA standards and to ISO-9001 quality processes, that more than 80 per cent of its products are manufactured in-house, and that its average engineer has over 15 years of experience. Enquiries are taken through a contact form or by telephone, with a separate contact number given for the Texas divisions. As described on anchorbaypackaging.com, read 23 September 2026.

The website reached for this listing is that of Anchor Bay Packaging Corporation, which names a Cleburne Division at 3601 County Road 316C, Cleburne, and gives a Texas contact number of (817) 641-8178; the name AGE Industries does not appear on any of the pages read. Anchor Bay Packaging describes itself as an international industrial packaging provider offering design, engineering, manufacturing, logistics, program management and customer support, and its packaging is grouped as expendable, returnable and P2 partitioning. It says it uses corrugated, wood, chipboard, plastic, foam or a combination of these materials, that it manufactures more than 80 percent of its products in house, and that its average engineer has over 15 years of experience. The company states that it specialises in the manufacture and sale of corrugated packaging products primarily to the automotive industry in the global market, and it also lists electric vehicle, food and beverage, consumer goods and specialty items among the sectors it serves. On quality it says it adheres to ISO and ISTA standards and refers to ISO-9001 quality processes. Its history page traces the company to 1979, when it says Mark Pierno founded Anchor Bay Packaging, and sets out a timeline running from an original design lab in St Clair Shores, Michigan, to eight design labs with 30 engineers by 2023; these statements are made of the parent company rather than of the Cleburne plant. Besides Cleburne, the Texas divisions listed are Cibolo, Houston, San Benito and Belton. No opening hours are published, and enquiries are invited by telephone or through a contact form. As described on anchorbaypackaging.com, read 23 September 2026.

American Box & Crating, trading as ABC Crating LLC, builds custom wooden crates and pallets and provides packing services. The company says it was founded in 1980 to supply crating and packing to North Central Texas businesses, beginning as a small family-operated venture and growing into a custom crating provider across the Dallas-Fort Worth area. Its custom designs include large crates for aircraft parts, crates for computer servers, protective crates for glass items, international shipping crates, and trade show shipping and display crates, with features such as vapor barriers, foam sheets and cut-outs, custom wood saddles, hinges, handles and secure lids. It also offers on-site crating and packing, travelling to a customer's facility for over-sized items, and supplies custom bases, custom pallets, heavy duty and corrugated panel products. Industries listed are aerospace, manufacturing, fine art and exhibits, technology and electronics, defense and military, and healthcare and medical. The firm states its wood is treated to the ISPM 15 standard and that ABC Crating LLC is a member in good standing with the Timber Products Inspection Heat Treatment Program, accredited by the American Lumber Standard Committee. Operations are at a Farmers Branch, Texas facility described as 10,200 square feet, with trailer-high docks, a drive-up ramp and temporary indoor storage; a related location, Island Pallet LLC, is listed in Pine Island, Minnesota. Hours are Monday to Friday, 7:30 am to 4:00 pm CST. Work is quoted through a request-a-quote form or by telephone. As described on abcrating.com, read 23 September 2026.

Overseas Hardwoods Company, which trades as OHC, presents itself as a third-generation family business importing and manufacturing what it calls "High Performance Lumber Products." Its history page traces the family back to Mobile River Sawmill Company, started by brothers Lee and Edward Robinson in 1917, and states that T. Lee Robinson Sr. founded Overseas Hardwoods Company in 1967 to import superior hardwoods from Southeast Asia for the transportation industry. The Lufkin, Texas operation entered the company through the 2014 purchase of Angelina Hardwoods; OHC says it relocated the Lufkin plant in 2018 to a 16-acre site with a 147,000 sq ft warehouse plus a 21,000 sq ft manufacturing facility, and added a second 25,000 square foot warehouse at the Lufkin location in 2021. Several staff listed on the team page are based in Lufkin, including plant, quality and safety, millwork and warehouse supervisors and an NHLA inspector. Product lines named include building materials for decking, siding, soffits and railing, millwork lumber for windows, doors, door parts, moulding and custom furniture, ProCoating pre-coated lumber, live-edge and cookie slabs, and accessories. In transportation the company calls itself "the largest supplier of Apitong for the OEM, Aftermarket, and Military trailer industries in North America," and says a 1990 US patent covers its full-length finger-jointed trailer flooring kits. Species mentioned include Apitong, Meranti, Spanish Cedar, Sapele, Sipo, Teak, Ipe, Cumaru, Garapa and Tigerwood. OHC states it maintains "over 10 million board feet of inventory at all times," custom kiln dries and machines in house under a Total Quality Management program, and says its sourcing complies with CITES, the Lacey Act and USDA APHIS and CBP guidelines with full chain of custody documentation for each shipment. As described on ohc.net, read 23 September 2026.

JHL Timber describes itself as a “Pine & Hardwood Chip Supplier in Troup, TX,” a chip mill “Exporting pine & hardwood chips domestically & internationally.” The company says it “produces up to 10,000 tons of pulp quality chips weekly for our clients” and has “the expertise and capacity to partner with paper mills and manufacturers across the United States and throughout the world.” On history the site is careful about whose history it is telling: “Our roots go back almost 40 years. Our parent company, L&R Timber, started in 1983 and is now a third-generation chip mill,” while the homepage compresses this to “Our history goes back almost 40 years. Since 1983, our team has promised and delivered an excellent product with professional service.” The stated ambition is “to be a locally owned company with a global reach,” and the firm says its team has “exported our products as far as Japan.” Three product lines are described: “Pulp Quality Chips,” “Harvested by Pro Logger Certified Contractors and processed with our commercial chipping equipment,” which the firm says produce “the highest grade chips for paper production” and contain “1/2% bark content or less”; “Pins & Fines,” “consistently sized pine and hardwood” material called “excellent for power production, nursery amendments, playground mulch, and more”; and “Bark,” “Processed using a commercial hog and screens” with “the consistency you’re looking for to keep your conveyors and equipment running without interruptions.” Under “Why partner with JHL?” the site lists “10,000+ tons of chips produced weekly,” “60,000 tons of wet storage space,” “Additional production capacity through our parent company, L&R Timber,” a chip quality profile that is “consistent and customizable,” and turnkey logistics including “On-site rail loading access,” “Access to a 50 truck fleet if needed,” and “Manpower for truck loading for clients providing transportation.” On sourcing and stewardship it writes: “As a chip mill producing thousands of tons of processed chips per week, we take our responsibility to conserve our world seriously. That’s why we acquire our pulpwood and hardwood exclusively with Texas Pro Logger Certified Contractors,” adding “We strive to utilize 100% of the fiber we produce.” It says it is seeking paper and pellet mill partners in nations “such as China, Italy, India, Indonesia, Japan, Australia, and more,” and its contact form invites inquiries on pulp quality chips, pins and fines, bark, delivered pulpwood and “Selling My Timber.” The mill is at 18410 County Rd 2153, Troup, TX 75789; phone (903) 842-3714. As described on jhltimber.com, read 23 September 2026.

Associated Truss and Lumber presents itself under the banner "Catering to the Professional Builder since 1962" and the line "Building quality products since 1962." The site is a short, plainly built one from an earlier era of the web - its footer still reads "Copyright 2010 AT&L" - and it addresses builders rather than homeowners. The company's own case for itself is given as a list: "All of our products are engineered and manufactured to exceed local, state, and national codes"; "Trusses produce less waste at the job site"; "Associated Truss and Lumber can produce up to 48" tall floor trusses"; "Trusses allow more design flexibility for longer spans"; "Open web trusses facilitate the installation of A/C, electrical and plumbing systems"; "You will know your costs before beginning the job"; "Truss products are more uniform than dimensional lumber"; and "Trusses will provide you with greater speed and efficiency on the job." On the Services page the firm answers its own question, "Why choose us over our competitors?", with "Quality products and experience from 50 years of being family owned and operated," "Accurate and punctual take-offs and delivery," "Custom decorative corbels/brackets, rafter tails, and trusses," "A knowledgable sales staff and superb customer service," "A strict quality control program" together with inspection "by the Truss Plate Institute," and the convenience of getting "all of your lumber and open web trusses from one location." The home page adds that the business has been a "Member of the Home Builders Association for over 40 years." The navigation lists Home, Products, Services, Gallery, Press, Location, Jobs and Contact, though only the home, services and contact pages were captured in this crawl. Contact details given are a mailing address at 388 S. Larkin, Sunnyvale, TX 75182, a phone number of 972-226-1973 and a fax number of 972-226-9253; no business hours, staff names, ownership names or service-area map appear anywhere on the pages read. Nothing on the site describes land, acreage or forestry services - it is a truss and lumber manufacturer selling to professional builders. As described on associatedtruss.com, read 23 September 2026.

The web address on file for this Ennis listing, bbqwf.com, no longer serves a site of its own: it forwards to duraflame.com, the corporate site of Duraflame, Inc. That site names Barbeque Wood Flavors among its “family brands & subsidiaries” and gives it a single line: “Barbecue Wood Flavors is a leading supplier of private label and contract supply for charcoal, chunks and chips for commercial and consumer markets.” The company history page dates the connection, saying Duraflame “continues to grow its position in the cooking woods market by acquiring W W Wood, Inc. in Pleasanton, TX in 2016, Barbeque Wood Flavors, Inc. in Ennis, TX in 2017, and B&B Charcoal in Waelder, TX 2021.” Duraflame describes itself as family owned since the 1917 formation of California Cedar Products Company in Stockton, California, now “in its third generation of family ownership and stewardship,” and says it “employs approximately 600 people at offices and manufacturing facilities across North America in California, Texas, Missouri, Kentucky and Mexico.” Its brands are listed as duraflame, EnviroLog, Cowboy Charcoal, Western Premium BBQ Products, B&B Charcoal, Timberland Forest Products and Barbeque Wood Flavors. Corporate headquarters are given as 2879 Saint Rose Parkway, Suite 200, Henderson, Nevada, and the site states plainly that “we do not sell direct online at this time.” A reader should understand that the pages read are the parent company’s corporate site. Beyond the 2017 acquisition and that one-line brand description, they say nothing specific about the Ennis, Texas plant — no capacity, wood species, ordering terms, minimum order, buying practice or certification is given, and no local contact is published. As described on duraflame.com, read 23 September 2026.

Endura Products, Inc. describes itself as "a U.S. American-Made manufacturer of components for entry door systems that enhance performance, save time, eliminate service calls and cut costs", summarising its position as "We Don't Make Doors. We Innovate and Make Door Components That Power The Performance of Your Door Systems." The product lines listed include exterior door frame solutions such as FusionFrame and FrameSaver rot-proof door frames, standard wood door frames and mull packs; sills and sill systems including the Z-Series adjustable inswing and bumper outswing sills, the Z-Articulating Cap Sill, the Replaceable Deck Sill and the ADAptive Sill System, which the company calls "the first water-rated ADA-compliant door sill"; French door astragals in flip lever, multi-point, push button, slide bolt, lite, hurricane and Trilennium versions; weatherstrip, sealing pads, sloped sill pans and door bottoms; and multi-point locks under the Trilennium 3020, 3070 and 3500 and PanoLock Plus names. Endura also runs a Certified Powered By Endura programme, which it describes as "a combination of state-of-the-art components, certified testing and a performance warranty to create reliable and competitive door systems", and says its components "have undergone Comprehensive Independently Certified Testing", listing rollover, cycle, temperature, UV/exposure, salt-spray and user-friendly testing. The site states that Endura "is headquartered in Greensboro, NC, with facilities in NC, TX, and TN, and distributes products throughout the U.S. and Canada", gives a contact address in Colfax, North Carolina, and points customers to online retail partner BetterDoor for replacement parts. The site is company-wide and does not describe the Nacogdoches, Texas operation specifically. As described on enduraproducts.com, read 23 September 2026.

The stockbuildingsupply.com address on file now resolves to Builders FirstSource, and everything read for this listing came from that company's corporate site rather than from any Austin operation. Builders FirstSource describes itself as a leading US supplier of structural building products, value-added components and services to the professional market for single-family and multi-family construction and repair and remodelling, with approximately 565 distribution and manufacturing locations spread across 43 states and 91 of the top 100 core based statistical areas, about 28,000 team members, and a contact address at 6031 Connection Drive, Suite 400, Irving, Texas. The product list runs to lumber, plywood and sheathings, trusses, manufactured components, mouldings and millwork, doors, windows, stairs and stair parts, decking, roofing, siding, cabinets and countertops, and its READY-FRAME pre-cut framing packages. Services listed include truss and engineered wood product design, millwork capabilities and custom millwork, drafting, showrooms and design centres, delivery and pick-up with photographed delivery confirmations, installed services, multi-family and pro remodel work, modular construction and the myBLDR customer portal; on the millwork side the company says it mills lumber and assembles products to order and has over 141 millwork locations nationwide. It states that services vary by location and asks customers to contact their local store for availability, with quotes requested through a form or a local branch. None of the corporate pages read for this listing names the Austin operation at 4501 Burleson Road or says what it makes or buys there, so nothing here should be read as this particular location's own account of itself. As described on bldr.com, read 23 September 2026.

The website read for this listing is the corporate site of Georgia-Pacific, the national parent company, and the corporate pages read here do not name the Corrigan operation or say what it takes in, so nothing in this entry should be read as the mill's own account of itself. At the corporate level the company describes itself as a maker of everyday products, listing building products, cellulose, consumer products, GP PRO, packaging, pine solutions and recycling among its business lines, and naming Quilted Northern, Brawny and Dixie among its consumer brands. It says it makes pulp and corrugated boxes, operates one of the largest recycling businesses, and sells building materials through large do-it-yourself retailers. The corporate pages state that the company has more than 30,000 employees and more than 150 locations worldwide, with facilities in nearly 30 states including Texas, and that it is a Koch, Inc. company. A history page traces the parent from its founding in Augusta, Georgia in 1927 and lists company-wide milestones, none of which refer to Corrigan; because those statements belong to the parent rather than to this site, no founding year, services or certifications have been taken from them for this listing. No hours, local contacts or quoting process for the Corrigan site appear on the pages read. As described on gp.com, read 23 September 2026.

The website recorded for this Camden listing in Polk County, Texas is the corporate site of Georgia-Pacific, and only corporate pages came back when it was read. Those pages describe a company founded in 1927 in Augusta, Georgia, as Georgia Hardwood Lumber Company, a hardwood lumber wholesaler that then operated five sawmills in the South, acquired by Koch in 2005 and now run as a wholly owned subsidiary with more than 150 locations worldwide and over 30,000 employees. At company level it says it makes building products, cellulose, consumer tissue and tableware, packaging and recycled fibre, under brands including Quilted Northern, Brawny and Dixie, and its locations page lists Texas among the nearly 30 states in which it operates without naming individual plants. The corporate pages read for this listing do not name the Camden operation, do not say what it takes in or what it produces there, and give no hours, contacts or account of how work is quoted, so nothing here should be read as this mill's own description of itself, and the founding year, product lines and company-wide figures above belong to the parent rather than to the Camden site. Anyone needing particulars of the Camden facility would have to approach it directly. As described on gp.com, read 23 September 2026.

Delta Millworks describes itself as an award-winning, family-owned manufacturer of architectural-grade wood siding, paneling and decking, working from 4701 East 5th Street in Austin for more than 40 years. Its history page dates the business to 1985, when Bob Davis founded it in the same building the company still occupies, with a focus on architectural millwork and reclaimed longleaf pine; in 1994 it supplied longleaf pine millwork for a four-year restoration of the Texas State Capitol. The same page records the team beginning to burn wood with a torch in 2007, selling its first shou-sugi-ban cladding job in 2010, adding modified woods such as Accoya from 2015, thermally modified products in 2022 and a Lunawood ThermoWood range in 2023; by 2025 the company says it ships worldwide, and it lists placings on the Inc. 5000 in 2024 and 2025. The collections named are Accoya, thermally modified wood, Lunawood, western red cedar, shou sugi ban, Delta Prefinished and Old Souls Reclaimed, sold as exterior cladding, interior paneling, decking, soffits and interior ceilings. Everything is built to order and every step of manufacture is carried out in-house at the Austin facility, from rough lumber planks to a finished product, with quality control checks at each stage and crating in custom-built pallets for shipping. The customers named are architects, designers, builders and contractors; quotes carry the product information needed to write Delta into a building specification, and the company states lead times of two to three months for almost all products and a minimum order of 1,000 square feet, with smaller quantities directed to its overstock shop. Architect and builder tours are by appointment only. As described on deltamillworks.com, read 23 September 2026.

The pages behind this listing are the corporate website of PalletOne Inc., the parent company, which names New Boston among its Texas service-area locations alongside Clarksville, Dallas, Gilmer, Huntsville and Port Arthur. PalletOne calls itself "the Largest New Pallet Manufacturer in the USA" and "America's #1 Pallet Company," says it is "a division of UFP Packaging," and claims "over 40 years of experience in the pallet industry." It states that it has the largest pallet inventory and greatest pallet assembly capacity in the United States, processes over 200 million board feet annually, and owns and operates pallet manufacturing facilities and sawmills throughout the eastern United States, with more than 90 locations nationwide and a corporate office in Bartow, Florida. Listed products include new custom pallets, heat-treated and ISPM 15 pallets, CP, GMA, automotive and system pallets, wood skids, recycled and repaired or remanufactured pallets, custom crates and bins, replacement parts and cut stock, and mulch and other by-products. Services include unit load consulting, pallet redesign using Best Pallet and the Pallet Design System (PDS), pallet standardization, request-for-proposal preparation, warehouse solutions, pallet repair programs and the Pallet Concierge program. The company says it is "certified and comply with ISPM-15 guidelines" for wood packaging used in international trade. On sustainability it reports that 100% of its products are recyclable, that over 15% of total products sold in the prior year were recycled or upcycled, and that it upcycles by-products including sawdust, wood chips and mulch. The pages say nothing specific about the New Boston plant. As described on palletone.com, read 23 September 2026.

Gamez Pallet Inc., listed here as Gamez Pallet Company, is a family-owned business based in Dallas, Texas, working from 2720 S Peachtree Road in Balch Springs. It describes itself as one of the suppliers of recycled wood pallets in Texas and as a full-service wood pallet manufacturer, and it makes the point that it does not only sell pallets but buys them as well. The site carries the line "Moving Dallas Since 1995" together with an offer of fast pick-up and delivery. Its stated mission is to deliver the highest quality products and services in its industry with a focus on customer satisfaction, and it says that customer service is its top priority and that any item is more valuable to the customer when it is backed by fast, friendly, professional customer service. The site is arranged as a home page with separate pages for products and information, location and a request-a-quote form, so quotes are handled either through that form or by telephone on (972) 289-2867, the same number held for this listing. The street address published on the site differs from the one on file for this listing. Nothing on the site sets out species handled, plant capacity, opening hours or certifications. As described on gamezpallet.com, read 23 September 2026.

General Packaging Corporation is a packaging manufacturer that presents itself as a single Texas company operating four production plants across the state, listing locations in Richardson, Dallas, Conroe and Garland, with corporate offices in Richardson; the site does not describe the Dallas plant as a separate business or give it its own contact details. The company says it opened for business in 1957 with the idea of producing cost-effective, technically sound packaging, and that it has been family owned and operated. Its products include corrugated packaging (corrugated boxes, custom corrugated boxes and heavy-duty boxes), wood products such as new construction pallets, skids and crates produced at dedicated wood plants, export packaging, custom foam cushioning and inserts, and engineered and integrated packaging solutions, including military (Mil Spec) packaging and industrial crates. It states that it serves industries ranging from automotive and defense to heavy industry and oil and gas, ships hundreds of customers each month, and ships across the United States and internationally. The company reports more than 900 unique parts shipped per month, over 200,000 square feet of combined manufacturing space and over 60 years in business, and says it maintains an ISTA-certified testing lab and an in-house engineering and design staff. It describes beginning relationships with an in-person consultation, designing or redesigning packaging, producing a prototype to confirm the design, then manufacturing; quotes are requested by phone, through an online request-a-quote form, or from existing drawings. As described on gpctexas.com, read 23 September 2026.

Gillespie Lumber Company, located on South Highway 59 in Nacogdoches, Texas, describes its line of work as "Hardwood Lumber - Laminated and Crane Mats". The company says it "was established in 1965 by R.L. Gillespie and his son Lloyd to meet the ever growing demand for hardwood products", and that it is "now beginning the third Generation with the announcement of Robyn Gillespie taking over management of the mill", adding that over the years it has become "a well know supplier of hardwood products throughout the Texas/Louisiana region". It states that it initially produced quality hardwood cross ties for the railroad industry along with board road materials for oil exploration, and that in order to better serve customers it expanded its manufacturing to include crane/dragline mats and laminated mats. The products named on the site are hardwood mats, crane mats, dragline mats, rig mats, pallet lumber and pipeline skids. The company says it sells pallet lumber to pallet manufacturers and to shipping companies "needing the strength that can only be found in a hardwood pallet", and that stevedores use its custom sized hardwood timbers and hardwood dunnage "to secure some of their most expensive loads before transport overseas". It also announces that it now rents crane/dragline and laminated mats, with "flexible terms" and a willingness to work with customers on all their rental needs, and closes by saying it is "poised for the 21st century's hardwood needs" and would like to help with its knowledge and experience. As described on gillespielumber.com, read 23 September 2026.

Groves Pallet Co. is a pallet manufacturer at 516 Orchard Ave in Port Neches, Texas. Its home page carries a closing announcement: "It is with a mixture of heavy hearts and profound gratitude that we announce we are ceasing all pallet production on September 30, 2026." The company thanks "our loyal customers for allowing us to service your pallet needs for the past 57 years" and says that "At this time, we will continue to accept and honor all purchase orders we receive prior to September 30th," inviting questions about the announcement and closing with thanks "once again for an extraordinary 57 years." The home page also displays IPPC heat treatment stamp markings. The contact page lists business hours of 7:00 AM to 4:00 PM Monday through Thursday and 7:00 AM to 10:00 AM Friday, with separate delivery and pickup hours of 7:00 AM to 3:00 PM Monday through Thursday, including a noon to 1:00 PM lunch break, and 7:00 AM to 9:00 AM on Friday. Staff named on that page include John Dunn as president, a sales assistant, a plant manager and an accounts manager. As described on grovespalletcompany.com, read 23 September 2026.

Clark’s Hardwood Lumber Co. describes itself as “a distributor of fine hardwood lumber, plywood and other building materials, and a manufacturer of custom moulding,” operating from 700 E. 5 1/2 St. in Houston’s historic Heights, the same site the business has occupied since it opened. It says it keeps “over 100 species of domestic and international hardwoods, exotic woods and softwoods in stock, including many rare and beautiful species from around the world,” and claims to be “the largest specialty lumber company in the region.” Its history page dates the business to 1946, when C. R. Delhomme Lumber Co. opened on the banks of White Oak Bayou; McGinnis “Mac” Clark bought it in 1968 and renamed it Hardwood Lumber Company, with “Clark’s” added in 2004, and the page states that the firm “continues to be owned and operated by the Clark family.” On manufacturing it says its “onsite mill includes a full panoply of industrial-grade woodworking equipment,” that it specialises in custom moulding, and that it maintains “a library of over 2000 profiles with the capability of matching any profile not in our library.” Other listed lines include live edge slabs and mantels, plywood and sheet goods, trailer decking, dimensional lumber and turning blanks. Customers are invited into “multiple warehouses” to hand-select material, and the contact page gives hours of Monday to Friday 8:00 AM to 5:00 PM and Saturday 9:00 AM to 1:00 PM, with a phone number of (713) 862-6628. The pages read here name no certifications, no graded-lumber accreditation and no staff credentials, and set out no minimum order; the site simply invites visitors to “come visit us or give us a call for a quote.” As described on clarkshardwood.com, read 23 September 2026.

Hardwood Lumber Company of Dallas describes itself as a supplier of wood products and millwork for professional and hobby woodworking craftsmen, in business since 1986. It says it carries a large inventory ranging from traditional native woods to tropical exotic woods, and also stocks matching veneered plywood for many of its selections, along with solid lumber, small live edge stock, live edge slabs and claro walnut rounds. The company states that an onsite production facility allows it to dimension customers' lumber to their specifications, and that it offers a large selection of moulding styles as well as custom orders. Its listed services include millwork, with a complimentary straight edge and cross cut on every board purchased, plus planing, sanding and resaw services; it says its planer handles panels up to 42 inches wide and that customers may bring in their own panels to be run through the machine for a fee, provided the panels are free of nails and metal, with epoxy negotiable at higher rates. The company also makes custom mouldings, stating that it creates its own knives and can reproduce a piece from a customer's sample or from its catalogue, including tongue and groove, shiplap, crown, base and case, window stool and hand rails. It further describes specialising in custom glue-ups such as plank-style and butcher-block countertops, stair treads, floating shelves and stair landings, with options such as sink cut-outs and 45-degree mitre cuts. Customers are encouraged to visit, discuss projects with a woodworking specialist and select their own lumber, and to contact the company with an inquiry for pricing. As described on hlcdallas.com, read 23 September 2026.

This is a second Schertz, Texas directory record for the same company, and like the others it carries only what UFP Industries publishes on its corporate website; the crawled pages are entirely company-wide and contain no Schertz or Texas branch detail beyond a note that Universal made site-built construction acquisitions in “Pennsylvania, Texas and Colorado” in 1997. The corporate pages date the business to 1955, when it was founded as Universal Forest Products to supply lumber to factory built housing, and mark “70 years in business on February 9” in 2025. The company describes itself under the tagline “No Mission Statement. Just People on a Mission.” and reports $6.3 billion in net sales for 2025, 196 locations worldwide, more than 15,000 people and hundreds of affiliates, and a listing on NASDAQ under UFPI since going public in 1993. Products span its Retail Solutions, Packaging, Construction and International segments, covering value-added products for residential and commercial construction, outdoor living, packaging and other industrial applications; specific lines named include pressure-treated lumber (its ProWood brand is treated with Osmose’s MicroPro), composite decking and railing under the Deckorators brand, mineral-based composite decking, residential trusses, concrete forming products and pallets through PalletOne. The culture pages describe an emphasis on promoting from within, with senior executive tenure averaging 23.3 years. Corporate headquarters is in Grand Rapids, Michigan. As described on ufpi.com, read 23 September 2026.

This entry is drawn from West Fraser Timber Co.'s corporate website, which covers the company as a whole rather than the New Boston mill on its own; the single direct reference to the town is a story headline, "West Fraser Unveils Solar Farm at New Boston, Texas Sawmill." The company says it makes "renewable wood building products for the world" and describes itself as "a growing international company built on a seven-decade foundation of close-knit community values," operating more than 50 facilities across Canada, the United States, the United Kingdom and Europe with about 10,000 employees, among them 32 lumber mills, 15 OSB mills, 9 engineered wood mills and 2 pulp and paper mills. Its product range is given as OSB, lumber, plywood, LVL, MDF, particleboard and pulp. The stated business strategy rests on "being low cost, maintaining a strong balance sheet and reinvesting our profits into the business." The company dates itself to the Ketcham brothers' 1955 purchase of a small planer mill in Quesnel, B.C., and recounts a 2007 acquisition of 13 mills across the U.S. South, including Texas, that gave it a combined Canadian and U.S. lumber production capacity of approximately 6.2 billion board feet. It reports planting its two billionth seedling in Western Canada in 2021, joining the Science Based Targets initiative in 2022, and trading on the Toronto Stock Exchange as WFG.TO and on the New York Stock Exchange as WFG. As described on westfraser.com, read 23 September 2026.

The website reached for this listing is the corporate site of West Fraser Timber Co., a large publicly traded multinational wood products company listed on the TSX and NYSE, and the pages read say nothing specific about the Henderson, Texas sawmill named in this record. The company describes itself as “a diversified global wood products company producing renewable building materials” and says it makes “renewable wood building products for the world.” Its products pages cover OSB, lumber, plywood, LVL, MDF, particleboard and pulp. The careers section refers to “more than 50 locations,” and the investor section states a strategy “driven by three key elements: being low cost, maintaining a strong balance sheet and reinvesting our profits into the business.” The history page traces the business to September 1955, when “the Ketcham brothers—Sam (25), Bill (30) and Pete (33)—purchased Two Mile Planing Mills Ltd. in Quesnel, B.C., for $60,000”; the West Fraser name came from a 1958 renaming of Wright Lumber and was adopted company-wide by 1966. The company says it has “grown from a small planer mill with 12 employees to become the largest producer of sustainable and renewable wood building products in the world,” and that it “accelerated our expansion into the U.S. in 2007, acquiring 13 mills located in North Carolina, South Carolina, Georgia, Florida, Alabama, Arkansas and Texas.” Sustainability pages promise “responsible product sourcing and harvesting practices, backed by globally recognized forest certifications” and link to a certifications and chain-of-custody section, but the pages read name no specific certification scheme. Nothing on these pages gives the Henderson mill's products, capacity, staffing, log purchasing terms, minimum tract size, or how a landowner would sell timber to it. As described on westfraser.com, read 23 September 2026.

Lee's Custom Lumber keeps a small, plainly built site — the home page still carries the template title “Welcome To My Homepage” — describing a custom wood business rather than a production sawmill. Instead of a yard address it tells visitors where to find it: “We setup at Riverside Trade Days on the second and fourth weekends,” open “9 - 4 on Friday 9 - 5 on Saturday 9 - 4 on Sunday,” at “State Hwy. 42 and Harrison Road, Longview, Texas.” That is the only location the pages give; the directory places the business at Gladewater, and the site does not mention Gladewater at all. Under “What We Sell” it lists “Custom made plaques and signs,” “Lumber for your woodworking projects. Cedar, Walnut, and other wood's that come available,” and “Special cut shaps and sizes. Cedar Tree cookies of various sizes, diagonal cuts for table tops.” The About page adds that “We sell lumber, CNC router and Laser engraving's” and that “Most of our work is custom”: the shop will supply lumber, cut a carving a customer finishes themselves, or “make your project from start to finish.” Signs and plaques are “made to your specifications” and designed “on the spot.” Most of the About page is a general explanation of the difference between a CNC router and a laser engraver rather than anything about the business itself. The phone number printed on the site, (903) 720-1346, is not the number carried on the directory listing. The pages give no founding year, no staff or credentials, no certifications, no pricing, and nothing about buying timber or a minimum tract size. As described on leescustomlumber.com, read 23 September 2026.

Lincoln Lumber describes itself as a premium provider of lumber and forestry products serving markets across the United States and internationally, and says it has done so for over 50 years. The site does not give a founding year, stating only that the company has built relationships with partners in its markets throughout the last five decades under business philosophies it sums up as honesty, integrity and quality. Beyond what it calls a large geographic wholesale footprint, the company says it operates eight locations across the Southern United States and provides value-added services, producing custom products for use in numerous industries. The product headings listed on the site are dimension products, manufactured products, hardwood products, blocking and dunnage, and plywood and OSB, and the site carries a separate safety section as well as pages for jobs and for meeting the team. A prompt on the home page also invites enquiries from parties who need wood chips. The corporate office is given as 1390 Porter Road, Conroe, Texas 77301, with a telephone and fax number; this is the only address shown on the page read, and it differs in street name from the address held for this listing. No opening hours are stated. Enquiries are directed through a contact sales page or by telephoning the Conroe office; no pricing or quoting process is described. As described on lincolnusa.com, read 23 September 2026.

The crawl for this listing reached the Stella-Jones corporate website rather than any page about the company's Lufkin operation, and the two pages captured say nothing about Lufkin, and nothing about Texas beyond its appearance as one option in a state drop-down on the sales contact form. At that corporate level Stella-Jones presents itself as a "North American manufacturer of pressure treated wood products" and heads its home page "MANUFACTURING INFRASTRUCTURE SOLUTIONS" for "society's needs of today and tomorrow." The contact page describes the company as "North America's leading supplier of railway ties, utility poles, residential lumber and industrial wood products" and says Stella-Jones is "uniquely positioned to meet your supply needs across the continent." Its sales enquiry form splits the business into industrial products, railway ties, utility poles, residential lumber and retail enquiries, and covers customers in both Canada and the United States. Site navigation also lists Steel Structures and Utility Pole Crossarms alongside the treated wood products, together with sections for Inside Stella-Jones, Investor Relations, Careers and Safety Data Sheets. The company is publicly traded, with a stock quote shown in the site header under the ticker SJ.TO, and the home page promotes a 2022 ESG Report and a new brand platform. No plant-level detail, production capacity, species, founding date or certifications appear on the pages captured. As described on stella-jones.com, read 23 September 2026.

The directory records M & M Lumber Company of Texas as a Houston sawmill on Riley Road with the website mandmlumber.com. That address now serves Structural Wood Components, and the pages read are that company’s corporate site: they say nothing specific about an M&M Lumber sawmill, its yard, its equipment or its staff. M&M appears only as a navigation item, “M&M Lumber Quote Request”, and a footer button, “Request a M&M Quote”, set beside separate truss and shipping-cradle quote links, which indicates the two trade together; the pages do not explain the relationship. What the site does describe is Structural Wood Components, “a leading supplier of handcrafted Heavy Timber Trusses and related components” that has operated “for over 20 years”. It states that the firm is “located in the Houston metropolitan area approximately 40 miles northwest of downtown in Waller, Texas” and “utilizes a 6-acre site with approximately 13,000 square feet of shop space under roof”, an “impressive, City of Houston Certified, manufacturing facility that includes our on-site sawmill and re-sawing equipment”, a steel fabrication shop and truss assembly areas. Trusses are built from “Southern Yellow Pine, Douglas Fir, Western Red Cedar or Bald Cypress”, with spans that “have ranged from as short as five feet for personal residences to 80 feet for a large retail center”, and the company says it has shipped to “over 36 states, Puerto Rico and the U.S. Virgin Islands.” On quoting, it says a structural timber truss “requires engineering certification by the customer or SWC” and that the customer must supply building plans or roof detail. The footer gives the Waller street address together with a Houston post office box and a 713 telephone number. As described on structuralwoodcomponents.com, read 23 September 2026.

Magnolia Brush Manufacturers, Ltd. describes itself as a designer and manufacturer of brooms and brushes for the professional tradesman, founded in Houston in 1907 by George Zehetner as the Houston Brush Company. Its history on the site records a move to Dallas in 1918, incorporation in Texas as Magnolia Brush Manufacturers, Inc. in 1947, relocation to Clarksville in 1953 through the efforts of the Clarksville Industrial Foundation as the town's first corporate industry, sale of the business to Kenneth W. Backus in 1995, and restructuring as a limited partnership in 2003. The company states that its Clarksville plant now occupies more than 100,000 square feet, manufactures over 500 different items, and distributes to all fifty states and a number of foreign countries. Products described include concrete finishing brooms, floor, garage, street and contractor brooms, corn and upright brooms, deck and floor scrubs, hand scrubs and utility brushes, counter and bench dusters, vehicle wash and long handle brushes, floor squeegees, wire scratch brushes, masonry and acid brushes, and mops, buckets, handles and dust pans, made with natural fibres such as tampico, palmyra and broomcorn as well as engineered filaments, by hand and on automated staple set equipment. The company sells only through distributors and not direct to end users, invites distributor applications through a form, and takes custom enquiries by telephone, asking for the application and the quantities involved. Office hours are 8:00 am to 5:00 pm Central, Monday through Friday. As described on magnoliabrush.com, read 23 September 2026.

Morris Export Services publishes one short page, headed “Engineered for Global Transit”. Almost everything the company says about itself is contained in two sentences: “Morris Export is a trusted U.S. Customs BONDED warehouse. Providing world-class export packing, crating, and logistics solutions since 1942”, followed by “Your partner in global industrial transportation.” The page gives the telephone number 713-675-9101 and places the business in Houston, Texas. It carries navigation links to About Us, Services, Facilities, Bonded Services and Contact sections, but only the home page was read, and that page offers no detail behind the summary line. Nothing on it describes the crates, boxes or export packaging the firm builds, the sizes or specifications it works to, whether it heat-treats timber to ISPM-15 for international shipment, what its warehouse or yard can handle, or how work is quoted and priced. It names no staff and no qualifications, lists no trade association memberships, and gives no street address; the directory entry places the business at 1225 Mc Carty Dr. in Houston. A reader wanting to know whether the company suits a particular export packing or crating job would have to telephone and ask. As described on morrisexport.com, read 23 September 2026.

The website at this address presents the business under the name Newton Custom Homes, based in Newton, Texas, with a mailing address of P.O. Box 749, Newton, TX 75966 and a telephone number in the 409 area code. Its home page banner reads "Building Dreams Since 1980." The about page says Newton Custom Homes "is a family owned and operated business nestled in the heart of Deep East Texas" that has "dedicated ourselves to outstanding quality and service in the home construction business." It is written in the first person by the founder's child, who states, "My father started this company in 1980 and we are still open today, because of our dedication to God, Family, and our Customers," and promises that a client's house "will be built with the same love, morals, and integrity as my father had when he originally opened Newton Custom Homes." The work offered is custom home design and construction: the site invites customers to "Fully Customize Your Home" and to "Let Us Help You Design a Floor Plan That Fits You and Your Family," while also offering "Hundreds of Existing Plans to Choice From." Its customization page adds, "Never has there been two homes built alike," and says the customer will be "fully involved in every step from the designing, planning, building." Business hours are listed as 8:00 am to 5:00 pm Monday through Friday, closed Saturday and Sunday. The pages describe home building in general terms and name no log home products, timber species or building materials. As described on newtonloghomes.com, read 23 September 2026.

Olsen & Guerra Lumber Co. keeps a single, plainly built page that appears not to have been revised for a long time: it ends with the notice “Copyright © 1997” and invites readers to “Check here later to see what we have been up to.” Under the heading “Service to the World!” it states that the company “provides Lumber - Plywood - Service - Supplies” with “Quality and Knowledge” to “Industrial and Commercial Contractors, the Underground Utility Industry, the Oil and Chemical Industry, the Transportation Industry, Railroad Contractors, and Highway Contractors”, and adds the words “since 1957”. Two people are named as the contacts for “knowledgeable help and assistance”, H. R. Daniel Guerra and Joe Guerra, Jr., both reached on (281) 449-0191. The page gives a street address of 5200 Cedar Hill, Houston, TX 77093, a post office box in Houston 77293, and a fax number, and records membership of the “Lumberman’s Association of Texas” and the “National Lumber & Building Material Dealers Association”. Links to products and people pages are shown, but the page read carries nothing further about species, grades, stock held, milling capability or plant. The site publishes no prices, states no minimum order, names no certifications or staff qualifications beyond the two contacts, and does not explain how a quote is obtained beyond the invitation to telephone. It is worth noting that the directory classes the firm as a pallet, container or remanufacture plant, while the site itself describes supplying lumber, plywood and contractor supplies rather than manufacturing pallets. As described on olsenguerra.com, read 23 September 2026.

The site reached for this listing is panel.com, the corporate site of Panel Processing, Inc., the Michigan-based parent of the Texas entity named in this record. It describes the company as “an employee owned, U.S. based, wood panel manufacturer with 50 years of industry experience,” and says that custom flat panel fabrication “has been Panel Processing, Inc.’s specialty for 50 years,” carried out across “6 manufacturing facilities.” The about page’s history states that “Panel Processing was founded in 1971 by R. M. ‘Bob’ Granum” in Alpena, Michigan, that the company “became 100% employee owned” in 1999 and “100% owned by the ESOP” in 2004, and that it has “grown to 6 facilities in 4 states.” One timeline entry speaks to the Texas operation directly: under the year 1975 the page reads, “In an effort to expand offerings and manufacturing space, PPI purchased a hardboard finishing plant in Jacksonville, Texas.” That is the only mention of Jacksonville on the pages read. The about page says the company works from “multiple substrates including raw thin and thick HDF, MDF, particleboard, plywood” and sets out capabilities including cut-to-size, CNC machining, custom paint and coatings, edgebanding and finishing, laminating, lithographic mounting, paper punching and pegboard punching; panel products listed include slatwall, pegboard, chalkboard and markerboard. Markets named are retail, hospitality, office and education, healthcare, furniture, flooring, kitchen and bath, toy and game, financial institutions, storage and home organization, and cannabis dispensaries. The pages do not say which of these capabilities are performed at Jacksonville, give no staffing, capacity, hours or local contact for the Texas plant, and say nothing about buying timber or logs, a minimum tract size, or certifications. As described on panel.com, read 23 September 2026.

Patterson Wood Products, Inc. states that it "has been producing premium quality wood pellets and shavings in Nacogdoches, Texas since 1993", from a facility on N.W. Stallings Drive. Its products, the company says, are made from "100% Southern Pine wood fiber, kiln-dried for superior performance". The pellet line covers heating pellets, described as a clean-burning, energy-efficient fuel, and bedding pellets for "superior animal comfort and absorbency", which the site describes as highly absorbent small flake shavings compressed into pellets that expand when exposed to moisture, reducing odours and disposal costs and being easy to pick. Wood shavings are offered in Large Flake, Medium Flake, Mini Flake and Ultra Fine grades, described as versatile for dozens of industrial and commercial applications. The company supplies bulk orders "from palletized product to full tractor-trailer loads" direct from its facility and invites contact for volume pricing, with its enquiry form listing intended uses such as home heating, landscaping and garden, industrial or commercial and retail resale. It also buys raw material, inviting vendors with sawdust, shavings, chips, bark or roundwood and logs in pine, hardwood or mixed species to get in touch. Claims made for the pellets include being allergy-free and clean with no dust or dirt, having less moisture than cordwood, higher BTU content and low ash output, being an all-natural fuel with "cleanest burn of any solid fuel", and offering "consistent quality since 1993" and being made in the USA. The team named on the site is Art Patterson, president, Markus Hodges, general manager, and Heath Pruitt, plant manager. As described on pattersonwp.com, read 23 September 2026.

Pleasant Pallet describes itself as a supplier of pallets and wood products in the Texas area and says it has done so for two decades; no founding year is given on the pages read. The company says it manufactures custom-sized pallets and states that a new pallet is designed for size, lift devices, load weight and type, number of uses and other characteristics, noting that over-design means paying for more pallet than is needed while under-design can result in spilled loads and injured workers. It also supplies precision cut new or reclaimed lumber, blocks and plywood for in-house pallet repairs, dunnage, warehouse rack supports and other packaging needs, and it picks up unwanted pallets and wood waste for full-service customers. The site says the company has a sawmill on site so it can cut and grade its own lumber for each order, uses a computerized customer ordering system that brings up historical data for re-orders, and provides expedited production and fast delivery along with value-added services including vendor managed inventory, JIT delivery, automatic restocking and blanket orders. It presents itself as one-stop shopping for pallet and wood recycling needs and says it helps customers manage shipping and warehouse costs. Hours are given as 7am to 4pm, Monday to Friday. Orders and product enquiries are handled by telephone or through the contact page. As described on pleasantpallet.com, read 23 September 2026.

Quality Mat Company makes ground protection and construction matting from its base in Beaumont, Texas. Its history page states that the company was formed in 1974 by Joe Penland to provide temporary roadways and work surfaces for construction sites, and the home page describes it as having been in the business for 52 years. The range set out on the site covers crane mats, interlocking mats, eco mats, laminated mats, rig mats, and timbers, skids and custom mats, together with mat rentals and used mats, and the company says it serves oil and gas, construction, petrochemical, wind, pipeline, and highline and utility work. It states that it provides manufacturing, shipping and logistics, delivery and installation, for clients large and small. On materials and method, the site says its mats are made from southern hardwoods, primarily oak, assembled as 2-ply, 3-ply or parallel lumber units, that it developed a pre-assembled interlocking ground protection mat system in 1980, and that annual mat production exceeds 250,000. Its own timeline records early premises in Nederland, Texas, a 45-acre manufacturing plant opened at Beaumont in 1985, facilities opened at Killdeer, North Dakota in 2011, and a patented synthetic laminated eco mat introduced in 2013; it also notes that mats have been finished in pink since 1992 in honour of breast cancer survivors. The company describes itself as family built, family operated and family oriented, and lists charitable work around Beaumont. Quotes are given by telephone on 800-227-8159 or through a custom quote form on the site. As described on qmat.com, read 23 September 2026.

Richardson Timbers describes itself as a complete timber milling company, founded in 1949 and marking 77 years in 2026, that mills wood timbers and produces custom millwork products. It states that it sells wholesale only and exclusively through its dealer network, supplying lumber and building supply customers who in turn serve builders, and that delivery is available nationwide throughout the United States. The company says it offers Douglas Fir, kiln dried Douglas Fir, Western Red Cedar, mixed hardwoods and specialty exotic timbers, and notes that Accoya wood, Red Grandis and truck-load quantities of Yellow Pine are also available. It gives stock sizes of up to 20 by 20 inches and lengths up to 40 feet for Douglas Fir and Western Red Cedar, up to 12 by 12 inches and 24 feet for kiln dried Douglas Fir, and up to 12 by 12 inches and 20 feet for green common mixed hardwoods, with red and white oak available by special order. Listed mill services include an exclusive surfacing process, saw texturing, surfacing on all four sides, custom siding patterns, precision end trimming, hand hewn finish, custom sizing, trailer flooring, barge decking and remanufacturing of customer materials to specification, along with custom corbels, brackets, rafter tails and timber truss arches. The company operates from Denton Drive in Dallas and a facility in Bertram, Texas, and says its staff and managers have over 150 combined years of experience. Enquiries are made by phone or through its contact and product inquiry forms. As described on richardsontimbers.com, read 23 September 2026.

This listing is for Rock-Tenn Company at an address in Dallas, Texas. The domain on file, rocktenn.com, no longer serves a site of its own: it redirects to smurfitwestrock.com, the site of Smurfit Westrock, the successor company into which WestRock, itself formed from Rock-Tenn, was combined. The pages that answered describe Smurfit Westrock as a global paper and packaging manufacturer. They state that it manufactured 220 billion square feet of corrugated packaging in 2025, holds positions in the solid board, folding carton and Bag-in-Box markets, and makes paper and board with a capacity of about 23 million tons a year. The company says it operates 63 recycling plants across 40 countries and 62 paper mills, consumes roughly 13 to 14 million tons of recovered fiber a year, and buys recyclable paper and cardboard from commercial businesses. It states that it sources fiber from small private landowners and from its own forests, which it describes as FSC and/or PEFC certified, with all sourcing forests chain-of-custody certified, and its paper mill system as 100 percent chain-of-custody certified. These corporate pages do not name the Dallas operation on this listing or say what it handles, so nothing here should be taken as that site's own account of itself. As described on smurfitwestrock.com, read 23 September 2026.

Rogers Lumber Company operates a sawmill at 8330 Old Hwy 90 in Orange, Texas, and describes itself as a "5th generation family sawmill that has manufactured high quality pine timbers and lumber in Orange, Texas since 1965." The company states that it specializes in "dimensional timbers sold mostly to treating facilities for use in industrial construction." Its site is organized around sections covering who the company is, its sawmill process, its products and delivered logs, and it invites visitors to "learn more about us and the forestry industry." The company says it is a proud member of the Texas Forestry Association and supports sustainable forestry. The site notes that the mill appears in a video produced by the TCEQ promoting that agency's Small Business and Local Government Assistance program, and it points to the company's sign and its billboard along its I-10 frontage. Directions given on the site route visitors from I-10 exit 870 for FM 1136 along the service road for about two miles, past the sawmill to a driveway with truck scales, with the office described as the brick building near the scales. Business hours are listed as Monday through Friday, 7 AM to 4 PM. As described on rogerslumbercompany.com, read 23 September 2026.

Satterwhite Log Homes, headquartered at 8405 US-259 in Longview, Texas, describes itself as "one of America's leading producers of log homes and log cabins," built from dead standing timber "for homeowners who value quality and enjoy the beauty of nature." The company traces its start to Sam Satterwhite, who left college in 1973 and began building his first log home near Henderson, Texas in late 1974 after a friend in the timber business asked, "Sam, if you can build something as different as an A-frame, how about building me a log home?" Travonda Satterwhite joined the business at its start, drew the early floor plans and today continues to lead the company, which calls itself a family business. The site says Satterwhite has been in business "for almost 50 years," that "tens of thousands of families have built with Satterwhite," and claims an "A+ Reputation of Trust." Logs are milled from dead-standing Engelmann Spruce from higher elevations of the Rocky Mountains, sourced primarily from U.S. National Forests and bought from the Forest Service since 1983; the company states "we avoid cutting green or living trees" and defines dry as "below 17% moisture content all the way through." Milling began in Gypsum, Colorado, moved to Gunnison, Utah in 1997 (a 100-plus acre log yard, mill and office), and a further sawmill was built at Chama, New Mexico in 2016. Buyers choose among three options, "We Build It" (materials and labor to dry-in a constructed shell), "You Build It" (a materials package of house logs, framing lumber, plywood, doors and windows) and "Logs Only." Longview holds a 16,000-square-foot headquarters, two model homes, showrooms, a log home lumberyard, a specialty shop for mantels, tables and custom cutting, warehouses, mill and distribution; an office and model home opened at Ellijay, Georgia in 2006. Offices are open Monday through Saturday. As described on satterwhite-log-homes.com, read 23 September 2026.

Gourmet Wood Products, Inc. presents itself as a manufacturer of hardwood cooking fuel rather than as a timber or land-services firm. Its About Us page states that the company is “Family-owned and operated” and that “We've been doing it that way since we split our first log back in 1982,” and adds that in 2022 it “celebrated our 40 th Anniversary by launching our first retail product, GWP Premium Cooking Wood.” The home page describes species-specific firewood used for cooking, cut “to fit your kitchen’s unique needs” and “Consistent and uniform in size with specified dimensions required by industrial class ovens and grills.” The dimensions it names are “Chips, Chunks, 11-inch Mini logs, 16-inch logs, Pizza Cut Logs (Smaller Diameter), and Cedar Planks.” The food service page lists “Mesquite, Hickory, Pecan, three different Oak species, and many types of fruit wood,” and says the firm has “partnered with most major Food Service distributors such as Ben E. Keith, Sysco, Performance Food Group and more.” Banner text repeated across the site claims the wood is “kiln dried to below 20% moisture content” and that the company is “one of the only wood products manufacturers that stores all of our processed wood on concrete.” A site menu also carries mulch and topsoil. The contact page gives the Rendon Road address, hours of “Monday – Friday 8:00 AM – 5:00 PM,” and says the store is open to the general public; pricing runs through a call, the home page asking readers to phone “to get a customized quote for your business.” The pages print endorsements from named barbecue teams but state no third-party certifications, no staff credentials, and nothing about minimum order sizes or acreage. As described on gourmetwood.com, read 23 September 2026.

Berdoll Sawmill describes itself as a family owned and operated sawmill near Austin, Texas, established in 2009 by Brandon and Brandi Berdoll and built on Christian values. The business harvests and mills native Texas hardwood logs, sourced sustainably within a 100-mile radius of the sawmill, into kiln dried live edge slabs, furniture grade lumber, mantels, end grain disks, flooring and wall and ceiling material, working in species such as pecan, mesquite, black walnut and longleaf pine. The site states that the company has complete on-site control over every step of production, drying wood in onsite computer-controlled kilns, then flattening live edge slabs before planing them to a consistent thickness ready for hand sanding, and guaranteeing its products to be dry, flat and insect free. A fully equipped woodshop offers jointing, planing, wide belt sanding, straight line ripping, resawing, large dimensional crosscuts, flattening of lumber and slabs, S4S and custom flooring, wall and ceiling material and mouldings. Inventory is displayed in a 4,500 square foot humidity-controlled showroom east of Austin, open Monday to Friday, 8:00 am to 5:00 pm, and the company ships nationwide. It says it will work with customers needing anything from one board to 10,000 board feet, and asks that questions about products or services be sent through the contact form or by telephone. As described on berdollsawmill.com, read 23 September 2026.