Selling Timber in Guilford County, NC

All 100 counties, which only a handful of firms on the state register can claim — wherever the tract sits in North Carolina, this one covers it. Two registered foresters, and the older of the two registrations is number 482, sixteenth-oldest of the 178 on the register. Appraisal, cruise and sale administration are all here, so a landowner can value the stand, measure it and run the sale through to contract in one place. Seventeen services in all, out as far as Christmas tree management, urban forestry and forest taxation. The firm holds Association of Consulting Foresters membership, which is limited to full-time consultants.

Fifty-eight counties is a big footprint — wider than nine out of ten firms on the register — and it stretches from the mountain counties around Watauga and Avery clear across the piedmont into the inner coastal plain at Wayne, Greene and Edgecombe. Two registered foresters, so the work does not stall if one is booked. Appraisal, cruising and sale administration are all listed, and unusually the firm pairs woodland work with urban forestry and an arboriculture credential, which matters if the tract sits on the edge of a growing town.

Thirty-two counties across the central piedmont and down into the Sandhills, covered by one registered forester with a deliberately short service list — eight items, narrower than nine out of ten firms on the register. What is on it is what a timber sale actually needs: appraisal, cruising, and sale administration through to contract, alongside forest taxation and forest real estate. Membership in the Association of Consulting Foresters, which admits full-time consultants only, says this is the business rather than a sideline. No website is listed.

Seventeen services and 40 counties — a broad piedmont practice reaching from Stokes and Rockingham on the Virginia line down through Randolph and Moore to Robeson and Scotland in the Sandhills. Appraisal, cruising and sale administration are all here, so the stand can be valued, measured and sold through one firm. Past that the list widens into wetland delineation, environmental impact statements, forest taxation and forest real estate, which is the range that matters when timber is one piece of a bigger land or estate question. ACF member.

Sixteen services is a wide list by the register's standards, and this one stretches from prescribed burning and herbicide application to wetland delineation, logging engineering and forest taxation — most of what comes up when a tract has been left alone for thirty years. Appraisal, cruising and sale administration are all included, so the whole sale can be run in one place. Sixteen counties, centred on Randolph and Guilford in the central piedmont and reaching south through Moore and Scotland into the Sandhills. ACF and SAF member; website listed.

Central and northern piedmont work: nineteen counties anchored on the Triad and running out to Surry, Alleghany, Moore and Lee. Twelve services, including the three a timber sale needs — valuing the stand, cruising it, and administering the sale — plus logging engineering, prescribed burning and forest taxation. One registered forester. No association memberships or website are listed in the register.

Tight and central: sixteen counties through the middle and north of the piedmont, with Davidson, Davie, Rowan and Randolph at the core, Surry and Stokes up on the Virginia line, and Granville and Person to the east. Ten services, appraisal, cruising and sale administration among them, so a stand can be valued, measured and taken to sale. Forest taxation and forest real estate are also recorded — the questions that surface when land and timber change hands at the same time.

Forty-seven counties is wide coverage by any measure — more than double what the median firm on the register carries — and this footprint runs from the Uwharries and the Charlotte-to-Triad piedmont north to the Virginia line and west into Wilkes, Watauga, Ashe and Avery, with a southern arm through the sandhills at Hoke, Scotland and Cumberland. Sixteen services, the complete sale set among them: appraisal, cruise, sale administration. Wetland delineation and urban forestry on the same list is a less common pairing.

Fifty-one counties, essentially the whole western half of the state: the mountain counties from Ashe and Watauga down through Buncombe and Transylvania, the full piedmont, and the Sandhills edge at Moore and Richmond. Mountain hardwood and piedmont pine are different jobs, and this firm is registered for counties of both. Twelve services, with appraisal, cruising and sale administration among them, plus logging engineering and herbicide application. The office is in Clemmons and a website is on file.

Registration 275 is the seventh oldest of the 178 on the N.C. Forest Service register — very few names on that list have been there longer. The territory is the northwestern piedmont: Forsyth, Guilford, Davidson and Rowan, up through the Yadkin Valley counties to Stokes, Surry and the Virginia line. Nine services, and it reads as a working forester's list rather than a full-service consultancy — management plans, reforestation, stand improvement, insect and fire protection, prescribed burning, and the appraisal, cruise and sale administration a sale runs on.

Denton sits near the middle of a territory that runs across most of the piedmont — Mecklenburg and Wake at either end, Randolph and Davidson in between — and then climbs into the northwestern mountain counties of Ashe, Alleghany, Avery and Watauga. Thirty-seven counties in all. The thirteen listed services lean transactional: appraisal, cruising, sale administration, forest real estate and forest taxation, with herbicide application and prescribed burning on the management side. Association of Consulting Foresters membership, which admits full-time consultants only.

Membership in the Association of Consulting Foresters is the thing to notice here. ACF takes full-time consultants only, so this is the firm's actual business rather than something done around other work. Thirty-three counties, running from Guilford and Rockingham in the northern piedmont across the Triangle and down through the sandhills into Scotland, Robeson and Pender. Sixteen services, including prescribed burning, forest taxation and urban forestry, and the appraisal, cruise and sale administration set a competitive sale depends on.

A piedmont practice with a long reach east — thirty-one counties from Surry and Stokes on the Virginia line, across the Triad and the Triangle, then out through Johnston and Wayne to Wilson, with Robeson and Cumberland picked up to the south. Logging engineering sits on the service list next to the appraisal, cruise and sale administration a sale runs on, which is the difference between marking a stand and working out how to get equipment onto it. Fourteen services in total. The register lists no association membership and no website.

Twenty-nine counties reaching from the northern mountains down through the foothills to the Charlotte suburbs — a wide arc for a firm with one registered forester. The register lists nine services, a shorter list than most, but it includes the three that matter when you are selling: appraisal, cruise, and administering the sale itself. Membership in the Association of Consulting Foresters, which admits only full-time consultants, says this is the whole job rather than a sideline. Logging engineering, forest taxation and wildlife management round out the list.

Registration number 208 is the fifth-oldest on the state register, a tenure very few listings can match. Thirty-six counties spread across the central piedmont, the Sandhills and the inner coastal plain, from Rockingham and Caswell on the Virginia line down to Scotland and Robeson. Eleven services, a focused list: appraisal, cruise and sale administration, reforestation, timber stand improvement, herbicide application, forest real estate and stewardship plans.

The office is in Charlottesville, Virginia, a good way over the state line, but the North Carolina coverage is nothing marginal: 64 counties, wider than 93 percent of firms on the register. That takes in the whole piedmont and coastal plain east of the mountains, from Currituck and Brunswick inland to Surry and Rockingham. Two registered foresters, fifteen services — wetland delineation and environmental impact work sitting alongside the appraisal, cruise and sale-administration set — and ACF membership.

Wide reach without quite being statewide: thirty-nine counties, from Guilford and Orange in the central piedmont east across the coastal plain to Craven, Onslow and Pender, with the Sandhills filling in between. Seventeen services, including logging engineering and wetland delineation and the appraisal-cruise-sale-administration set that lets a single firm value the stand, measure it and carry the sale to contract. Registration 610 is thirty-second oldest of the 178 on the register. ACF and SAF; no website listed.

Sandhills and central piedmont — twenty-two counties running from Moore, Richmond and Scotland north through Randolph and Guilford to Orange and Durham. Fifteen services, with the full sale package in there (appraisal, cruise, sale administration) and forest taxation, forest real estate and stewardship plans behind it, which is the combination that comes up when the timber is one piece of a larger estate or land question. Logging engineering and prescribed burning are listed as well. ACF member.

Elkin sits roughly in the middle of this range: a band of twenty counties running from the Triad northwest through Surry and Wilkes into Ashe, Watauga and Avery. That is median reach for the register — half the firms cover fewer. Fifteen services listed, including the full sale sequence of valuing the stand, cruising it and running the sale through to contract, plus herbicide application, wetland delineation and stewardship plans. One registered forester, and no website on file.

Forty-six counties is wide coverage for a one-forester firm — the register puts it in the top fifteen percent for reach, running from the Rockingham and Forsyth line east through the Triangle and out to Pitt, Onslow and Pender. Appraisal, cruising and sale administration are all listed, so the firm can value a stand, measure what's on it, and run the sale through to contract. The rest of the list stays practical: reforestation, stand improvement, herbicide work, wildlife management, and forest taxation for owners thinking past the harvest.

Two registered foresters, and the older of the two registrations sits twenty-ninth of 178 on the state register — near the front of the line. Coverage takes in the western piedmont and foothills and reaches up into Ashe, Avery and Watauga. Alongside appraisal, cruise and sale administration, the firm lists surveying, wetland delineation and environmental impact statements. That is an unusual pairing: the same visit that measures the timber can settle a boundary line or flag a wet corner before it stalls the harvest. ACF membership means consulting is the business, not a sideline.

Effectively the eastern two-thirds of the state: sixty-eight counties covering every county on the coastal plain and most of the piedmont, which puts this among the widest-reaching listings on the register. Two registered foresters, the older registration numbered 914. The sale trio is present — appraisal, cruise, contract administration. Surveying is on the service list as well, alongside forest real estate and urban forestry, so a boundary or title question does not need a second firm.

Seven registered foresters is the top of the range on the state register, and it comes attached to eighty-four counties — mountains to the Outer Banks, with very little of North Carolina out of reach. Scale like that means a landowner isn't waiting on one person's calendar, and it means the firm doesn't vanish when someone retires. Nineteen services: wetland delineation, environmental impact statements, forest taxation and urban forestry, alongside the appraisal, cruise and sale-administration combination a competitive timber sale actually runs on. ACF and SAF.

Every county in North Carolina is listed against this firm — all 100 — which puts it in the small group on the register that will work anywhere in the state. The service list is narrow by comparison: ten entries, built tight around the sale itself, with appraisal, cruising and sale and contract administration at the middle and forest taxation, utilization and marketing, urban forestry and stewardship plans around them. Both ACF and SAF memberships are recorded. One registered forester covers that ground, which is worth knowing when you're arranging a visit.

Registration 392 is the tenth-oldest entry on the North Carolina register, about as long a tenure as this directory contains. Coverage runs seventy counties — the entire mountain west, the whole piedmont, and down through the sandhills to the southeastern coast, stopping short only of the northeastern corner. Thirteen services, including appraisal, cruising and sale administration, plus forest taxation, forest real estate and prescribed burning. For a landowner whose sale is tangled up with an estate or a tax question, that last combination is the point.

The office is over the state line in Pilot, Virginia, and the twenty-six counties covered are the northern piedmont and the northwestern mountains — Rockingham, Caswell, Person and Granville along the Virginia border, west through Surry and Wilkes to Ashe, Watauga and Avery. Appraisal, cruise and sale administration are all listed. Both consulting bodies are here, ACF and SAF, and ACF admits full-time consultants only. Reforestation and stand improvement are not on the entry: this is measurement, valuation and sale work rather than planting.

Surveying is the unusual entry here. Alongside appraisal, cruising and sale administration, the register lists this Rockingham firm for survey work — which means a boundary question and a timber cruise can be settled on the same visit, useful on inherited tracts where nobody is quite sure where the line runs. The footprint is deliberately tight: ten counties through the sandhills and the Uwharrie country, from Guilford and Randolph down to Scotland and Anson.

The northern mountains around Ashe, Watauga and Avery, down through the foothills at Burke and Caldwell, then east across the western piedmont to Mecklenburg, Guilford and Rockingham — thirty-four counties in all. Registration 546 is the twenty-fourth oldest of 178, a long time on the state register. Fourteen services, appraisal and cruising and sale administration among them, with forest taxation and forest real estate for the landowner weighing a sale against holding on. ACF and SAF.

Registration number 335 puts this firm's oldest credential ninth-oldest of the 178 registrations on the state register — one of the longest tenures in North Carolina consulting forestry. Two registered foresters, twenty-seven counties covering the southern and central piedmont from Mecklenburg and Gaston up through the Triad, with the Sandhills along the bottom edge. Seventeen services: urban forestry, forest taxation and environmental impact statements on top of the appraisal, cruise and sale-administration trio. Memberships in ACF, SAF, the N.C. Forestry Association and the Forest Landowners Association — an unusually deep set.

A mountain-and-foothills practice that reaches east into the Triad: 35 counties, from Ashe, Watauga and Yancey down through Burke and Catawba to Guilford, Randolph and Rockingham. Appraisal, cruising and sale administration are all on the register, so one firm can value the stand, measure it and take the sale through to contract. The rest of the list leans toward what happens to the land afterward — reforestation, stand improvement, prescribed burning, insect and disease protection, recreation and wildlife management, stewardship plans.

Thirty-three counties is real scale for a single-forester firm, and the shape of the territory is distinctive: the whole western third of the state, foothills and Charlotte-area piedmont, then up into Watauga, Ashe, Avery and Mitchell where the ground gets steep and logging engineering stops being optional. That service is on the list, along with appraisal, cruising and sale administration. The registration falls in the oldest quarter of the state register, and ACF membership marks this as full-time consulting rather than a sideline.

Registration number 715 sits in the first quarter of the 178 registrations on the state register, so this is a long-standing entry. Coverage is eighteen counties in the western piedmont — the Charlotte and Gastonia side of the state, up through Iredell and Davie into the Triad, and west to Rutherford and Polk. Appraisal, cruising and sale administration are all listed, with timber stand improvement, herbicide application and urban forestry alongside. One registered forester; no website or associations on file.

Fifty-one counties is a great deal of ground for a single registered forester, and the map is essentially the western half of the state: Watauga, Ashe and Yancey in the mountains, the whole piedmont through Charlotte and the Triad, down to Scotland and Richmond. The same firm can look at a mountain hardwood tract and a piedmont pine stand. Appraisal, cruising and sale administration are all listed, with logging engineering, herbicide application and wildlife management around them.

The office is over the state line in Rock Hill, South Carolina, but the coverage is anything but local — 48 North Carolina counties, from Union and Mecklenburg up through the Triad and out west as far as Madison, Mitchell and Yancey. Appraisal, cruising and sale administration are all recorded, the set needed to run a competitive sale end to end. ACF membership marks this as full-time consulting work. Twelve services in total; no website on the register.

Forty-six counties, close to half the state, and nearly all of it east of the piedmont: the Roanoke and Tar drainages, the full northeastern coastal plain, south through Craven and Onslow, out to Dare, Hyde and Tyrrell, with a western reach into Guilford, Alamance and Durham. Very few firms on the register cover that much ground with a single registered forester. Fifteen services, from appraisal, cruise and sale administration through prescribed burning, herbicide work, recreation and urban forestry. No website is listed.

All one hundred counties — one of the few listings on the register that covers the entire state. The registration here is number 8, the second-oldest of the 178 registrations on the register, which is about as long a tenure as North Carolina forestry has to offer. Beyond the sale work of appraisal, cruise and contract administration, this firm surveys, so a boundary question and a timber cruise can be settled on the same visit. Christmas tree management, wetland delineation and environmental impact statements are also listed.

Fifty-nine counties from a one-forester office in Beulaville — effectively the whole coastal plain, from the Currituck and Dare marshes south to Brunswick, plus a long reach west through the Triad into Surry and Yadkin. Eighteen services puts this firm near the top of the register for breadth, and two of them are worth noticing: wetland delineation and environmental impact statements, which matter if the tract has bottomland or a permitting question attached to it. Valuation, cruising and sale administration are all covered. No website is listed.

Registration 513 sits seventeenth-oldest on the state register, and the firm holds Association of Consulting Foresters membership — ACF admits full-time consultants only, so it signals this is the business rather than a sideline. The office is in Blythewood, South Carolina, but the NC Forest Service register credits sixty-two North Carolina counties: the mountains, effectively the whole piedmont, the sandhills and the southeastern coast. Fourteen services, with appraisal, cruising and sale administration at the center and forest taxation, forest real estate and stewardship planning around them.

Eighteen services, 43 counties and two registered foresters working out of Asheville, across the mountains, the foothills and the western piedmont — Cherokee and Clay in the far southwest, up through Buncombe and Watauga, and east as far as Guilford and Randolph. The sale package is complete: appraisal, cruise, and administration of the sale itself. Around it sits an unusually wide list — prescribed burning, wetland delineation, forest taxation, forest real estate, herbicide work and urban forestry. ACF and SAF memberships are recorded, along with the International Society of Arboriculture, which fits the urban forestry line.

Ninety-two of North Carolina's hundred counties, and the eight it leaves out are all in the far southwestern mountains — Cherokee, Graham, Swain and their neighbors. Everywhere else in the state is on the list, which makes this one of the widest footprints on the register. The office, though, is in Columbia, South Carolina: registered to work here, but based over the line. Appraisal, cruise and sale administration are all listed, alongside prescribed burning, forest taxation, forest real estate and stewardship plans.

Statewide coverage — all 100 North Carolina counties — from an office in Gainesville, Georgia. Fifteen services are recorded, including the three that make a timber sale work: appraisal, cruising, and sale and contract administration. Prescribed burning, herbicide application, urban forestry and stewardship plans fill out the rest. The register carries this entry under the name US Forest Service, with one N.C. Registered Forester and no website given.

This entry is unusual: a national conservation organization holding a North Carolina registration, with the office on file in Indianapolis, Indiana, and twenty-five counties listed across the western piedmont and the northwestern mountains. The service list is short and specific — management plans, stand improvement, forest real estate, stewardship plans, and all three timber-sale services from appraisal through to sale administration. Both ACF and SAF memberships are recorded. Seven services is among the narrowest on the register, so anything outside that set would have to come from elsewhere.

Sixty-three North Carolina counties is a wide net — foothills at Wilkes and McDowell, the whole piedmont, and coastal plain out to Brunswick and Craven — and it is worked from an office in Athens, Georgia. One thing to settle before hiring: the register credits this firm with timber appraisal and cruising but not with timber sale and contract administration, so if you want someone to run the sale itself and hold the contract, ask directly. Twelve services otherwise, prescribed burning, herbicide application and wildlife management among them.

Peachland is the mill that takes what other yards turn away - gum, hickory, elm, hackberry and sycamore - cutting soft hardwoods into industrial timbers, cross ties and switch ties at a reported 16,000 to 18,000 board feet an hour. Edwards acquired the site in 2012; the parent company started in 1969 out of a dirt-floor chicken house in Marshville and now runs six North Carolina locations along with its own timber company and trucking arm. It is second-generation family owned and FSC certified company-wide. The NC Forest Service's Anson County register lists the Peachland mill as buying standing timber, hardwood grade logs, miscellaneous hardwood sawlogs and pine sawlogs, so a landowner sitting on a mixed, low-grade hardwood stand has a genuine outlet here.

The Moncure address is Hunt's Pittsboro Woodyard, one of four the company runs — the others are at Youngsville, Spring Hope and Sanford — and all four take pine and hardwood saw logs plus pine and hardwood pulpwood, accepting, in the company's words, “loads of all sizes”. Hunt Forest Resources was founded in 2004 and now employs more than 40 people across six North Carolina locations, among them Registered Foresters, timber buyers and licensed real estate professionals. It publishes annual figures of 7,000 acres of timberland managed, 56,000 trees planted, 5.5 million board feet of lumber produced, 650,000 tons of logs supplied and 4.5 million pounds of wood waste recycled. Affiliated brands cover lumber, recycling and firewood.

Behind the PO Box mailing address is a working mill. The Forest Products Locator and an OSHA inspection record independently place Blue Ox at 190 Sawmill Road in Stoneville and classify it as an operating sawmill (NAICS 321113) cutting both softwood and hardwood. Its buying list is wider than most Piedmont mills — the NC Forest Service register adds sweetgum, black and tupelo gum, beech and ash to the usual oaks, poplar and pine, which matters on a mixed tract where odd-species stems otherwise get left standing. It buys in Stokes County as well as Rockingham. The only regulatory history found is a planned OSHA safety inspection opened in July 2013 and closed that September with one serious and six other violations, settled informally for $325.

Portable milling is the distinguishing thing here — the saw travels, rather than the logs. The Forest Products Locator classifies the business as a sawmill handling both softwood and hardwood, and the NC Forest Service register lists it as a timber buyer working Randolph, Montgomery, Guilford and Alamance counties. Beyond those two entries there is very little on record: no website, no Facebook page, no reviews, no founding year, and a Locator listing last updated in May 2021. This is a small operation whose entire public footprint is an address and a phone number on two state registers.

Now trading as Kindled Provisions — Hunt Forest Resources states flatly that “East Coast Firewood, LLC is now Kindled Provisions” — this Moncure operation produces kiln-dried firewood rather than sawn products. The wood is USDA-certified pest- and mold-spore-free, which is what allows it to be moved across state lines and into parks and campgrounds. Production runs on a Multitek firewood processor and a Pezzolato vertical splitter, with quality checked using digital moisture readers on random samples, and the species offered include cherry, oak, hickory and Southern Appalachian hardwoods. The business shares its address and phone with Hunt's Pittsboro Woodyard and ships across the southeastern United States.

A Stoneville timber buyer that appears on both the Rockingham and Stokes county NC Forest Service buyer registers. The register records it as buying all hardwood and all softwood species as standing timber, sawlogs, pulpwood and chips — broader than the mixed-hardwood entry this listing was originally built from. Beyond the state register, searches found no website, no Facebook page, no reviews and no NC Secretary of State corporate record under this name.

Two trucks and two drivers is what the federal motor carrier register shows for this outfit as of its October 2024 MCS-150 filing under USDOT 3349173 — a small crew that hauls its own wood rather than subcontracting it out. It buys standing timber, sawlogs and pulpwood in all hardwood and softwood species, and appears on the Stokes County buyer register as well as Rockingham's. Worth knowing if you are calling around: its yard on Anglin Mill Road sits roughly a mile from Shelton Logging & Chipping at 2861 Anglin Mill Road, two separately incorporated Shelton logging businesses on the same road. FMCSA also carries a second number for the business, (336) 573-9551. No website, Facebook page or published reviews were found.

The NC Forest Service timber buyers register is the only record that could be found for this company. It lists stumpage purchase and timber cruising across eleven counties in the central Piedmont, with a five-acre minimum tract — a smaller floor than some buyers will consider. Repeated searches turned up no website, no Facebook page, no directory profile, no reviews and no founding date, so nothing beyond the register entry has been independently confirmed.

Tony McDowell started in 1974 cutting trees with a portable sawmill. A Pallet Enterprise trade profile describes what that grew into: a hardwood sawmill plus pallet plant spread over nine buildings and 112,000 square feet on 35 acres, employing about 75 people, with pallet operations bought in 2002 now making up roughly 30 percent of revenue. The company's website puts output at around 20 million board feet sawn a year and about 15,000 pallets a week; the trade profile reported 18 million feet and 10,000 pallets. Species run roughly 40 percent poplar and 25 percent each red and white oak. The part that matters most to a landowner is the forestry side — timber purchasing and evaluation, management planning, logging assistance, reforestation and land-management consultation — handled by the same company that saws the logs.

One of the quieter names on the NC Forest Service timber buyer register for Randolph County, buying standing timber, sawlogs and pulpwood across a ten-county range that reaches Rowan, Davie, Guilford and Forsyth. Research turned up nothing beyond that register entry — no website, no directory listing, no reviews, no founding date, nothing on the phone number or street address. For a landowner that means the register is the only public record, and any question about scale, equipment or what the mill is currently taking has to be asked directly.

Incorporated in October 1997 and still listed Current-Active with the NC Secretary of State, Stoneville Lumber holds something no other buyer in the Stoneville cluster does: a USDA APHIS-PPQ compliance agreement authorising it to receive logs from Canadian areas under gypsy moth quarantine, one of only 52 North Carolina facilities on that federal list. Its product range on the NC Forest Service register is the broadest around — standing timber, sawlogs, chip-n-saw, pulpwood, veneer and plywood logs, sawdust, chips and finished lumber — covering both what comes off a tract and what comes out of a mill. It is also one of the few Piedmont buyers that lists black walnut and cherry, two high-value specialty hardwoods most of its neighbours do not name. No website, Facebook page or published reviews were found.