Selling Timber in Caswell County, NC

A small territory, and a specific one: ten counties along the northern piedmont and the Virginia line — Caswell, Person, Granville and the northern edge of the Triangle. Twelve services, with an unusual pair among them, logging engineering and environmental impact statements, a combination that comes up when a tract has road, stream or permitting complications. Appraisal, cruising and sale administration are all on the register. No website is listed.

Membership in the Association of Consulting Foresters is the thing to notice here. ACF takes full-time consultants only, so this is the firm's actual business rather than something done around other work. Thirty-three counties, running from Guilford and Rockingham in the northern piedmont across the Triangle and down through the sandhills into Scotland, Robeson and Pender. Sixteen services, including prescribed burning, forest taxation and urban forestry, and the appraisal, cruise and sale administration set a competitive sale depends on.

All 100 counties, which only a handful of firms on the state register can claim — wherever the tract sits in North Carolina, this one covers it. Two registered foresters, and the older of the two registrations is number 482, sixteenth-oldest of the 178 on the register. Appraisal, cruise and sale administration are all here, so a landowner can value the stand, measure it and run the sale through to contract in one place. Seventeen services in all, out as far as Christmas tree management, urban forestry and forest taxation. The firm holds Association of Consulting Foresters membership, which is limited to full-time consultants.

A piedmont practice with a long reach east — thirty-one counties from Surry and Stokes on the Virginia line, across the Triad and the Triangle, then out through Johnston and Wayne to Wilson, with Robeson and Cumberland picked up to the south. Logging engineering sits on the service list next to the appraisal, cruise and sale administration a sale runs on, which is the difference between marking a stand and working out how to get equipment onto it. Fourteen services in total. The register lists no association membership and no website.

Carries an arborist's credential alongside the forestry one — ISA membership and urban forestry on the service list, which is what you want when the trees stand near houses, roads or a subdivision line rather than out on a working tract. Twelve counties: the Triangle and the ring north and west of it. Sixteen services all the same, appraisal, cruising and sale administration included.

Tight to the northern piedmont: Granville, Person, Vance, Caswell, Orange, Durham, Alamance and Wake. Eight counties is among the smallest footprints in this directory, and what it buys is local ground knowledge rather than reach. Registration number 538 is one of the older ones on the state register. Prescribed burning and urban forestry sit alongside the appraisal, cruise and sale administration a landowner needs, and the firm carries Society of American Foresters membership.

Thirty-two counties across the central piedmont and down into the Sandhills, covered by one registered forester with a deliberately short service list — eight items, narrower than nine out of ten firms on the register. What is on it is what a timber sale actually needs: appraisal, cruising, and sale administration through to contract, alongside forest taxation and forest real estate. Membership in the Association of Consulting Foresters, which admits full-time consultants only, says this is the business rather than a sideline. No website is listed.

Seventeen services and 40 counties — a broad piedmont practice reaching from Stokes and Rockingham on the Virginia line down through Randolph and Moore to Robeson and Scotland in the Sandhills. Appraisal, cruising and sale administration are all here, so the stand can be valued, measured and sold through one firm. Past that the list widens into wetland delineation, environmental impact statements, forest taxation and forest real estate, which is the range that matters when timber is one piece of a bigger land or estate question. ACF member.

The office is in Charlottesville, Virginia, a good way over the state line, but the North Carolina coverage is nothing marginal: 64 counties, wider than 93 percent of firms on the register. That takes in the whole piedmont and coastal plain east of the mountains, from Currituck and Brunswick inland to Surry and Rockingham. Two registered foresters, fifteen services — wetland delineation and environmental impact work sitting alongside the appraisal, cruise and sale-administration set — and ACF membership.

Wide reach without quite being statewide: thirty-nine counties, from Guilford and Orange in the central piedmont east across the coastal plain to Craven, Onslow and Pender, with the Sandhills filling in between. Seventeen services, including logging engineering and wetland delineation and the appraisal-cruise-sale-administration set that lets a single firm value the stand, measure it and carry the sale to contract. Registration 610 is thirty-second oldest of the 178 on the register. ACF and SAF; no website listed.

Forty-six counties is wide coverage for a one-forester firm — the register puts it in the top fifteen percent for reach, running from the Rockingham and Forsyth line east through the Triangle and out to Pitt, Onslow and Pender. Appraisal, cruising and sale administration are all listed, so the firm can value a stand, measure what's on it, and run the sale through to contract. The rest of the list stays practical: reforestation, stand improvement, herbicide work, wildlife management, and forest taxation for owners thinking past the harvest.

Sixteen services is a wide list by the register's standards, and this one stretches from prescribed burning and herbicide application to wetland delineation, logging engineering and forest taxation — most of what comes up when a tract has been left alone for thirty years. Appraisal, cruising and sale administration are all included, so the whole sale can be run in one place. Sixteen counties, centred on Randolph and Guilford in the central piedmont and reaching south through Moore and Scotland into the Sandhills. ACF and SAF member; website listed.

Fifty-eight counties is a big footprint — wider than nine out of ten firms on the register — and it stretches from the mountain counties around Watauga and Avery clear across the piedmont into the inner coastal plain at Wayne, Greene and Edgecombe. Two registered foresters, so the work does not stall if one is booked. Appraisal, cruising and sale administration are all listed, and unusually the firm pairs woodland work with urban forestry and an arboriculture credential, which matters if the tract sits on the edge of a growing town.

Registration 477 is fifteenth-oldest of the 178 on the state register — one of the longest-standing entries in this directory. The reach is broad to match: thirty-nine counties running from Caswell and Stokes on the Virginia line down through the Triangle and the sandhills to Brunswick and the coast. Fifteen services, with appraisal, cruising and sale administration at the center and prescribed burning, logging engineering, forest taxation and forest real estate around them. For an owner who wants competing bids rather than one offer, that middle trio is the part that matters.

Registration number five — the oldest registration in the N.C. Forest Service register, first of all 178. Fourteen counties, clustered along the Virginia line and the northeastern coastal plain: Vance, Warren, Granville and Person on the west side, Halifax, Northampton, Hertford and Bertie on the east. The full sale set is here — appraisal, cruise, sale administration — and so is surveying, which means a boundary question and a timber cruise can be handled in one engagement instead of two. An ACF member firm.

Effectively the eastern two-thirds of the state: sixty-eight counties covering every county on the coastal plain and most of the piedmont, which puts this among the widest-reaching listings on the register. Two registered foresters, the older registration numbered 914. The sale trio is present — appraisal, cruise, contract administration. Surveying is on the service list as well, alongside forest real estate and urban forestry, so a boundary or title question does not need a second firm.

Seven registered foresters is the top of the range on the state register, and it comes attached to eighty-four counties — mountains to the Outer Banks, with very little of North Carolina out of reach. Scale like that means a landowner isn't waiting on one person's calendar, and it means the firm doesn't vanish when someone retires. Nineteen services: wetland delineation, environmental impact statements, forest taxation and urban forestry, alongside the appraisal, cruise and sale-administration combination a competitive timber sale actually runs on. ACF and SAF.

Every county in North Carolina is listed against this firm — all 100 — which puts it in the small group on the register that will work anywhere in the state. The service list is narrow by comparison: ten entries, built tight around the sale itself, with appraisal, cruising and sale and contract administration at the middle and forest taxation, utilization and marketing, urban forestry and stewardship plans around them. Both ACF and SAF memberships are recorded. One registered forester covers that ground, which is worth knowing when you're arranging a visit.

An ACF member firm — the Association of Consulting Foresters admits full-time consultants only, so consulting is the business here rather than a sideline. Coverage runs to 18 counties across the northern piedmont, from Alamance and Orange through Wake and Johnston and down to Richmond and Hoke at the edge of the Sandhills. Fifteen services are recorded, the whole timber-sale set among them: appraisal, cruising, and running the sale to contract. Prescribed burning, wildlife management and stewardship plans sit alongside, for owners thinking past a single harvest.

Every service the state's A–U schedule covers is on this record — all twenty, more than 98 percent of firms on the register. So the timber-sale core of appraisal, cruise and sale administration sits alongside surveying, wetland delineation, prescribed burning, Christmas tree management and urban forestry. A landowner with a boundary question or a wet corner can get both answered on the same visit as the cruise. Coverage spans forty counties, from the north-central piedmont down through the sandhills and out to the southeastern coast. Memberships in the Society of American Foresters and the International Society of Arboriculture are recorded; no website is.

Central and northern piedmont work: nineteen counties anchored on the Triad and running out to Surry, Alleghany, Moore and Lee. Twelve services, including the three a timber sale needs — valuing the stand, cruising it, and administering the sale — plus logging engineering, prescribed burning and forest taxation. One registered forester. No association memberships or website are listed in the register.

Tight and central: sixteen counties through the middle and north of the piedmont, with Davidson, Davie, Rowan and Randolph at the core, Surry and Stokes up on the Virginia line, and Granville and Person to the east. Ten services, appraisal, cruising and sale administration among them, so a stand can be valued, measured and taken to sale. Forest taxation and forest real estate are also recorded — the questions that surface when land and timber change hands at the same time.

Fifty-one counties, essentially the whole western half of the state: the mountain counties from Ashe and Watauga down through Buncombe and Transylvania, the full piedmont, and the Sandhills edge at Moore and Richmond. Mountain hardwood and piedmont pine are different jobs, and this firm is registered for counties of both. Twelve services, with appraisal, cruising and sale administration among them, plus logging engineering and herbicide application. The office is in Clemmons and a website is on file.

Registration number 208 is the fifth-oldest on the state register, a tenure very few listings can match. Thirty-six counties spread across the central piedmont, the Sandhills and the inner coastal plain, from Rockingham and Caswell on the Virginia line down to Scotland and Robeson. Eleven services, a focused list: appraisal, cruise and sale administration, reforestation, timber stand improvement, herbicide application, forest real estate and stewardship plans.

Sanford sits on the hinge between the Sandhills and the central piedmont, and that is the shape of this practice — nineteen counties out from there, west to Montgomery, north to Caswell and Person, east to Duplin and Pender. Sixteen services is a broad list for a one-forester firm: the sale trio, plus logging engineering, prescribed burning, forest taxation, forest real estate, wetland delineation and urban forestry. Registration 781 is fiftieth-oldest of the 178 on the register. No associations or website are listed.

From Louisburg the coverage runs west to Durham and Orange, south through Wake and Johnston, and east into Edgecombe and Northampton — twenty-one counties straddling the line where the northern piedmont gives way to the coastal plain. The register lists the full sale set: appraisal, cruise, and administration of the sale itself. Logging engineering, herbicide application and stand improvement round it out, a list built around getting timber cut and the ground back into production rather than around consulting extras.

Forty-seven counties is wide coverage by any measure — more than double what the median firm on the register carries — and this footprint runs from the Uwharries and the Charlotte-to-Triad piedmont north to the Virginia line and west into Wilkes, Watauga, Ashe and Avery, with a southern arm through the sandhills at Hoke, Scotland and Cumberland. Sixteen services, the complete sale set among them: appraisal, cruise, sale administration. Wetland delineation and urban forestry on the same list is a less common pairing.

Denton sits near the middle of a territory that runs across most of the piedmont — Mecklenburg and Wake at either end, Randolph and Davidson in between — and then climbs into the northwestern mountain counties of Ashe, Alleghany, Avery and Watauga. Thirty-seven counties in all. The thirteen listed services lean transactional: appraisal, cruising, sale administration, forest real estate and forest taxation, with herbicide application and prescribed burning on the management side. Association of Consulting Foresters membership, which admits full-time consultants only.

The office is over the state line in Pilot, Virginia, and the twenty-six counties covered are the northern piedmont and the northwestern mountains — Rockingham, Caswell, Person and Granville along the Virginia border, west through Surry and Wilkes to Ashe, Watauga and Avery. Appraisal, cruise and sale administration are all listed. Both consulting bodies are here, ACF and SAF, and ACF admits full-time consultants only. Reforestation and stand improvement are not on the entry: this is measurement, valuation and sale work rather than planting.

Forty-six counties, close to half the state, and nearly all of it east of the piedmont: the Roanoke and Tar drainages, the full northeastern coastal plain, south through Craven and Onslow, out to Dare, Hyde and Tyrrell, with a western reach into Guilford, Alamance and Durham. Very few firms on the register cover that much ground with a single registered forester. Fifteen services, from appraisal, cruise and sale administration through prescribed burning, herbicide work, recreation and urban forestry. No website is listed.

Twenty-nine counties reaching from the northern mountains down through the foothills to the Charlotte suburbs — a wide arc for a firm with one registered forester. The register lists nine services, a shorter list than most, but it includes the three that matter when you are selling: appraisal, cruise, and administering the sale itself. Membership in the Association of Consulting Foresters, which admits only full-time consultants, says this is the whole job rather than a sideline. Logging engineering, forest taxation and wildlife management round out the list.

Surveying, wetland delineation, environmental impact statements, prescribed burning, urban forestry, forest taxation — the register lists twenty services here, as many as any firm on it carries, and appraisal, cruising and sale administration are among them. The territory is thirty-six counties, reaching from the northern piedmont around Durham and Granville east across the coastal plain to Currituck, Dare and Hyde, with a southern arm into Cumberland, Hoke and Robeson.

Two registered foresters and eighteen services inside a fifteen-county footprint — an unusual pairing, the breadth of a large firm in the geography of a local one. The ground is the Roanoke valley and the northern coastal plain: Halifax, Northampton, Warren and Bertie across to Nash, Wilson and Edgecombe. Appraisal, cruise and sale administration are all there, and the list keeps going well past the sale into prescribed burning, wetland delineation, forest taxation, Christmas trees, wildlife and recreation. It also holds one of the ten oldest registrations in the state register, and the firm is an ACF member.

Wadesboro sits in the middle of a thirty-six county territory that runs west to Cleveland and Gaston, north through Mecklenburg, Iredell, Durham and Granville, and east across the Sandhills to Brunswick, New Hanover and Pender — most of the southern half of the state, and a lot of ground for one registered forester. Appraisal, cruise and sale administration are all listed, with prescribed burning, herbicide application, forest taxation, forest real estate and urban forestry filling out fourteen services. ACF and SAF member, and a website is listed.

Registration 392 is the tenth-oldest entry on the North Carolina register, about as long a tenure as this directory contains. Coverage runs seventy counties — the entire mountain west, the whole piedmont, and down through the sandhills to the southeastern coast, stopping short only of the northeastern corner. Thirteen services, including appraisal, cruising and sale administration, plus forest taxation, forest real estate and prescribed burning. For a landowner whose sale is tangled up with an estate or a tax question, that last combination is the point.

Most of the coastal plain is in range here — Northampton and Halifax in the north, down through the Neuse and Cape Fear country to Brunswick — thirty-four counties in all, well above the register's median of twenty, with Caswell, Person, Lee and Moore attached on the piedmont side. Appraisal, cruise and sale administration are all listed, along with prescribed burning, herbicide application, forest real estate and forest taxation. Registration 578 is among the older on the register, and the firm holds ACF membership, which is limited to full-time consultants.

Fifty-one counties is a great deal of ground for a single registered forester, and the map is essentially the western half of the state: Watauga, Ashe and Yancey in the mountains, the whole piedmont through Charlotte and the Triad, down to Scotland and Richmond. The same firm can look at a mountain hardwood tract and a piedmont pine stand. Appraisal, cruising and sale administration are all listed, with logging engineering, herbicide application and wildlife management around them.

Fifty-nine counties from a one-forester office in Beulaville — effectively the whole coastal plain, from the Currituck and Dare marshes south to Brunswick, plus a long reach west through the Triad into Surry and Yadkin. Eighteen services puts this firm near the top of the register for breadth, and two of them are worth noticing: wetland delineation and environmental impact statements, which matter if the tract has bottomland or a permitting question attached to it. Valuation, cruising and sale administration are all covered. No website is listed.

The office is over the state line in Rock Hill, South Carolina, but the coverage is anything but local — 48 North Carolina counties, from Union and Mecklenburg up through the Triad and out west as far as Madison, Mitchell and Yancey. Appraisal, cruising and sale administration are all recorded, the set needed to run a competitive sale end to end. ACF membership marks this as full-time consulting work. Twelve services in total; no website on the register.

All one hundred counties — one of the few listings on the register that covers the entire state. The registration here is number 8, the second-oldest of the 178 registrations on the register, which is about as long a tenure as North Carolina forestry has to offer. Beyond the sale work of appraisal, cruise and contract administration, this firm surveys, so a boundary question and a timber cruise can be settled on the same visit. Christmas tree management, wetland delineation and environmental impact statements are also listed.

The lower Cape Fear and the southeastern coast are the core here — eleven counties including Brunswick, New Hanover, Pender, Onslow, Duplin, Bladen, Columbus and Robeson, plus Alamance and Caswell up in the piedmont. Twelve services: the full sale package of appraisal, cruise and administration, with reforestation, timber stand improvement, prescribed burning and forest taxation behind it. The registration is one of the newest on the state register.

Ninety-two of North Carolina's hundred counties, and the eight it leaves out are all in the far southwestern mountains — Cherokee, Graham, Swain and their neighbors. Everywhere else in the state is on the list, which makes this one of the widest footprints on the register. The office, though, is in Columbia, South Carolina: registered to work here, but based over the line. Appraisal, cruise and sale administration are all listed, alongside prescribed burning, forest taxation, forest real estate and stewardship plans.

Statewide coverage — all 100 North Carolina counties — from an office in Gainesville, Georgia. Fifteen services are recorded, including the three that make a timber sale work: appraisal, cruising, and sale and contract administration. Prescribed burning, herbicide application, urban forestry and stewardship plans fill out the rest. The register carries this entry under the name US Forest Service, with one N.C. Registered Forester and no website given.

Sixty-three North Carolina counties is a wide net — foothills at Wilkes and McDowell, the whole piedmont, and coastal plain out to Brunswick and Craven — and it is worked from an office in Athens, Georgia. One thing to settle before hiring: the register credits this firm with timber appraisal and cruising but not with timber sale and contract administration, so if you want someone to run the sale itself and hold the contract, ask directly. Twelve services otherwise, prescribed burning, herbicide application and wildlife management among them.

Worth reading the service list closely here. The register credits this entry with timber cruising and sale administration but not timber appraisal — so the valuation step most landowners want before going to market isn't among the listed services. What is listed is broad: 48 counties across the northeastern piedmont and most of the coastal plain, plus reforestation, forest real estate, wildlife management and stewardship plans. The office address is Atlanta, Georgia. No website is on file.

Peachland is the mill that takes what other yards turn away - gum, hickory, elm, hackberry and sycamore - cutting soft hardwoods into industrial timbers, cross ties and switch ties at a reported 16,000 to 18,000 board feet an hour. Edwards acquired the site in 2012; the parent company started in 1969 out of a dirt-floor chicken house in Marshville and now runs six North Carolina locations along with its own timber company and trucking arm. It is second-generation family owned and FSC certified company-wide. The NC Forest Service's Anson County register lists the Peachland mill as buying standing timber, hardwood grade logs, miscellaneous hardwood sawlogs and pine sawlogs, so a landowner sitting on a mixed, low-grade hardwood stand has a genuine outlet here.

The Moncure address is Hunt's Pittsboro Woodyard, one of four the company runs — the others are at Youngsville, Spring Hope and Sanford — and all four take pine and hardwood saw logs plus pine and hardwood pulpwood, accepting, in the company's words, “loads of all sizes”. Hunt Forest Resources was founded in 2004 and now employs more than 40 people across six North Carolina locations, among them Registered Foresters, timber buyers and licensed real estate professionals. It publishes annual figures of 7,000 acres of timberland managed, 56,000 trees planted, 5.5 million board feet of lumber produced, 650,000 tons of logs supplied and 4.5 million pounds of wood waste recycled. Affiliated brands cover lumber, recycling and firewood.

Panel and veneer production, not sawn lumber, is what happens at the Corinth Road plant: the Forest Products Locator classifies the facility as “Veneer Plywood Panels” and records it as taking both softwood and hardwood. The Manufactured in North Carolina supplier database lists 256 employees on site and gives the product line as composite panels and mouldings. The plant belongs to ARAUCO, which describes itself as a global forest products manufacturer with more than 50 years of manufacturing experience and distribution to over 3,500 destinations across North America. Its place on this list as a timber buyer comes from the NC Forest Service register.

Behind the PO Box mailing address is a working mill. The Forest Products Locator and an OSHA inspection record independently place Blue Ox at 190 Sawmill Road in Stoneville and classify it as an operating sawmill (NAICS 321113) cutting both softwood and hardwood. Its buying list is wider than most Piedmont mills — the NC Forest Service register adds sweetgum, black and tupelo gum, beech and ash to the usual oaks, poplar and pine, which matters on a mixed tract where odd-species stems otherwise get left standing. It buys in Stokes County as well as Rockingham. The only regulatory history found is a planned OSHA safety inspection opened in July 2013 and closed that September with one serious and six other violations, settled informally for $325.

Incorporated in April 1974, Elkins Sawmill is run by three officers who all share the family name. The Better Business Bureau rates it A+ — the company is not BBB accredited — and describes the product line as lumber, crossties, mulch and firewood, broader than the stumpage, sawlog and pulpwood purchasing the state register records. Besides the King Road mill in Moncure, the company also operates from an address in Goldston. It appears in the North Carolina Forestry Association's Buyer's Guide under timber buyers, though that guide carries non-member businesses alongside members, so membership should not be assumed.

Two trucks and two drivers is what the federal motor carrier register shows for this outfit as of its October 2024 MCS-150 filing under USDOT 3349173 — a small crew that hauls its own wood rather than subcontracting it out. It buys standing timber, sawlogs and pulpwood in all hardwood and softwood species, and appears on the Stokes County buyer register as well as Rockingham's. Worth knowing if you are calling around: its yard on Anglin Mill Road sits roughly a mile from Shelton Logging & Chipping at 2861 Anglin Mill Road, two separately incorporated Shelton logging businesses on the same road. FMCSA also carries a second number for the business, (336) 573-9551. No website, Facebook page or published reviews were found.

The BBB puts this Sanford operation's start date at September 14, 1971 — around 54 years of trading by the bureau's own file — though it is not BBB accredited and carries no rating, the bureau stating it has insufficient information to issue one. The N.C. Forest Service register lists the company buying all hardwood and softwood species as standing timber, sawlogs and pulpwood, broader than the single "mixed hardwoods" entry this listing previously carried. Manta categorises the business under pulpwood and shows about six employees. No website, Facebook page or published reviews were found anywhere.

Incorporated in October 1997 and still listed Current-Active with the NC Secretary of State, Stoneville Lumber holds something no other buyer in the Stoneville cluster does: a USDA APHIS-PPQ compliance agreement authorising it to receive logs from Canadian areas under gypsy moth quarantine, one of only 52 North Carolina facilities on that federal list. Its product range on the NC Forest Service register is the broadest around — standing timber, sawlogs, chip-n-saw, pulpwood, veneer and plywood logs, sawdust, chips and finished lumber — covering both what comes off a tract and what comes out of a mill. It is also one of the few Piedmont buyers that lists black walnut and cherry, two high-value specialty hardwoods most of its neighbours do not name. No website, Facebook page or published reviews were found.

The mill started in 1983 when its founders bought a bankrupt sawmill in southern Virginia and relocated it to a 14-acre site in Troy, cutting rough green four-quarter boards for North Carolina's furniture industry. After NAFTA closed those furniture factories in the years following 1994, it rebuilt around cross ties, pallet stock, flooring and furniture stock for export. It now employs more than 75 people across Randolph, Moore and Montgomery counties, runs a second mill — Tram Lumber in Seagrove, acquired in 2007 — and took a Manufacturer of the Year award in 2019, though the source does not name the awarding body. President Ray Allen, on site since the company opened, sums up the approach: “When something comes to our yard, we sell everything but the smell. We sell the sawdust, the bark, the chips and the lumber.”